Can I add two sets of chapters?

I think in the DVD hierarchy it's known as having multiple titles.
I am editing a wedding procession and a wedding reception would like the two separate iMovie videos on one DVD each with their own set of chapter markers. Is it possible?

Normally I simply put both (ceremony and reception) on the same dvd. And iDvd will allow you to do this /even if one must use dual layer media, provided the couple also uses a relatively new dvd player.
However some couples own very dated equipment / dvd players and to use the latest technology /DL media is to actually do a disservice to the bridal couple and their loved ones ... mainly because they won't be able to play their own wedding video unless they purchase a new set top dvd player. So one needs ASK and to take this into consideration prior to shooting the couple's wedding. A checklist often helps accomplish this.
I've had couples request a separate dvd for the actual ceremony and one for the reception (two physically separate dvd's). This isn't a problem in most cases.
But every once in a while someone also insists on ONE physical dvd (not two) but yet they own an older set top dvd player/s. So what would you offer them in this situation? You can't give them DL media (knowing they have an older dvd player).
Rather than use DL media (which you already know won't work on most older set top dvd players) I prefer to offer them a two-sided dvd-r like this (not to be confused with DL media):
http://www.runtechmedia.com/product.asp?sku=RitekDVDrDB8x50
The first side of the dvd contains the ceremony, while the second (separate iDvd project) contains the reception. However, there is a need to actually Flip /turn over the dvd to the opposite side in order to play the reception too.
Btw, it not a good idea to label the actual dvd if you opt to use double-sided dvd's. If you do, you will likely disable /destroy one of the working surfaces.
Hope this helps but if not just come on back.

Similar Messages

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Can i add two country holiday on my iCal and see them at the same time?

Can i add two country holiday on my iCal and see them at the same time? HOW?

Just subscribe to the appropriate calendars: you can subscribe to as many as you like.
http://www.apple.com/downloads/macosx/calendars/

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

Can you add two LDAP Diretories in Communications Manager 7.15?

In Communications Manager 7.15, I am integraing with a MS Active Directory. I have a rather large domain and several domains within the main forest. Can you add two unique LDAP directory entries and pull users from two different domains using SSL?
For example,
domaina.hq.myfirm.com
domain2.hq.myfirm.com

Yes, you can create up to 5 unique directory integrations as long as they are all the same type, i.e. MSFT AD.
HTH,
Chris

Can we setup two sets different 7912 logos in one CCM cluster?

Hi,
CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
Could someone let me know or any other better way to do?
Thanks,
JJ

Hi JJ,
This should work just the way you have described. Have a look;
Idle
Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
Leave this field blank to accept the default setting.
Idle Timer (seconds)
Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
Here how on CCM;
Method 1:
Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the URL Idle Time field, enter any positive value in seconds.
Method 2:
Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
Choose the phone/phones on which you want to put the display.
In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the Idle Timer field, enter any positive value in seconds.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
Hope this helps!
Rob

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

Can I add two monitors?

I remember when I bought my PB G4 15" I read that there was some capability to add two addional monitors to it. I have one attached already--a CRT I connnect with that digital to analog pigtail I got with the PB.
How would I attach the second external monitor?
Thanks!
Bob

Dual link DVI is for single displays of greater than a 24" such as Apple's 30" cinema display. Basically, the screenr esolution requires so much information to drive it it requires 2 DVI links, hence the dual-link DVI. It does not mean you can run two displays of that one single DVI port.
Now, something I've just thought about is to try and connect an extra display via s-video. Maybe then you can have a total of 3 displays without additional hardware.
As for a PC Card solution, yes it does work with a PowerBook. As I don't know of one specifically you might want to look at Apple's product guide…
http://guide.apple.com/
… for solutions.

How can i Add two parameters to Account Analysis Report R12?

Please i need to add two parameters Vendor Name & Currency to Account Analysis Report?

Dear Helios
1- I added the two parameters through navigating to concurrent ->Program - > Define
2 - Modifiy XLAAARPT.xml (Adding paramters and modify the query)
is this correct?
Regards,
Edited by: user565050 on Sep 6, 2012 1:17 AM

How can I plot two sets of data points in 3d graph?

I am trying to plot two sets of data points in 3d graph. I also need to make a set of data with one color and the other set with a different color. For example, I need to plot 10 (x,y,z) data points in 3d. Maybe 6 points need to be blue, and the other 4 red. Could you tell me how?

What is your LabVIEW version? (things are a bit different in 8.6).
Basically, you create multiple instances of the VI that gets placed automatically when you drop the 3D graph and then wire a different number to the plot ID at the bottom.
You define all the plots (color, style) via the properties dialog.
Have a look at my example posted here. One plot is "blue dots" and one is a "shaded surface". See how far you get.
Message Edited by altenbach on 04-23-2009 01:11 PM
LabVIEW Champion . Do more with less code and in less time .

How can i add two table data into third internal table see below

hi i insert diffferent table data into different internal table i did try to insert two different internal table data into third internal table by using move
but only single data is coming please help me
i want this two internal table data inot third internal table.
sELECT * FROM J_1IEXCHDR INTO CORRESPONDING FIELDS OF ITAB1 WHERE STATUS = 'P'.
SELECT * FROM J_1IEXCDTL INTO CORRESPONDING FIELDS OF ITAB2 WHERE LIFNR = J_1IEXCHDR-LIFNR.
                         AND DOCYR = J_1IEXCHDR-DOCYR,
                         AND DOCNO = J_1IEXCHDR-DOCNO.
WRITE: / ITAB1-LIFNR,
          ITAB1-DOCNO,
          ITAB1-EXYEAR,
          ITAB1-BUDAT,
          ITAB2-EXBED,
          ITAB2-RDOC,
          ITAB2-ECS.
ENDSELECT.
ENDSELECT.
thank you .

hi
Two add two internal tables data. first we need to create third internal table with all the fields of first two internal tables.
later u move the two internal tables data to third internal table
by looping the internal table which have more records or depending on the requirement and move the corresponding fields of first internal table to the third internal table and use the read statement with condition based on primary key of first itab and get the corresponding data of 2table into 3table.
i am sending the sample code to u.
check it out. i think u will understand how to move.
select vbeln waerk netwr erdat audat kunnr
   into table it_vbeln
   from vbak
   where vbeln in s_vbeln
     and erdat in s_erdat.
if not it_vbeln[] is initial.
select kunnr name1
   into table it_kunnr
   from kna1
   for all entries in it_vbeln
     where kunnr = it_vbeln-kunnr.
endif.
loop at it_vbeln.
clear it_final.
   it_final-vbeln = it_vbeln-vbeln.
   it_final-waerk = it_vbeln-waerk.
   it_final-netwr = it_vbeln-netwr.
   it_final-erdat = it_vbeln-erdat.
   it_final-audat = it_vbeln-audat.
read table it_kunnr with key kunnr = it_vbeln-kunnr.
   it_final-name1 = it_kunnr-name1.
append it_final.
endloop.

Can I add two "Comments and Markups" toolbars?

I often need to mark up drawings in Adobe Acrobat, and I find it difficult to continuously change from green to red, which takes a fair amount of time. Is that a way to speed up the color change? Or possibly could I add two "Comments" toolbars so that one could be green and one could be red?

Have you thought of Acrobuttons by WindJack? It helps you write small javascripts that you then keep on your toolbar.

How to add two sets of arraylists together into one?

Hi there
I am trying to finish my assignment for a car dealer..
welll i have got two arrays in my Dealaership Class
I did something like
ArrayList customerSoldCars;
ArrayList customerBotCars;
I was wondering if it's possible to add them together as in something like
ArrayList allCustomer = customerSoldCars + customerBotCars;
so that i can just create a method something called listAllCustomers()
which will be showing the list of both "customers who sold the their cars to the dealer" and "customers who bot the cars from the dealer"
any help would b highly appriciated..
cheerz

You can use a Set (in order to avoid duplicates.)
Then you simply add your lists' customers to the set using the addAll method.
This way, you will obtain all your customers from the two lists merged into a single collection.
Finally, if you really need a List, you can create one out of the Set.

Can I import two sets of data to Essbase at the same time?

For example, use two MaxL Scripts to import data to one Essbase Application Datatbase in the Same time, is there any impacted or will fail one of them or nothing will happen but just slower?

Hi,
It is possible you run 2 dataloads at the same time, there will be probably be an impact in performance than just loading one file at a time, not sure of the impact, you will have to test.
If you are talking about a BSO cube you could also have a look at the essbase configuration setting DLTHREADSWRITE to see if you can improve the dataload time by increasing the threads.
If it is an ASO cube then you should be able to do multiple dataloads into different buffers, though you have to commit them to the database at the sametime.
Cheers
John
http://john-goodwin.blogspot.com/

How can I add two different hyperlinks to a banner ad?

I have a banner ad that cycles back and forth between two ads, and am trying to set it up so that when the first ad is up (5 seconds or so) and the viewer clicks on it, it goes to one URL, and when it changes to the second ad and the viewer clicks, it takes them to a different URL.
I've attached the .fla file I'm trying to build. Thanks for any help you can provide!

Wow- thanks a lot! I didn't expect you to take my file and make it
work...I just wanted to learn how to do it.
I set the frames per second back to the original 12, but otherwise
this works perfectly. Thanks so much!
Dan

Can I add two sets of chapters?

Similar Messages

Maybe you are looking for