Can I address a Hard drive by its volume label, rather than its letter?

Hi All,
I have a question about file paths... I'm building an instrument and have a spare USB port internally. I want to use that to attach a simple flash drive to give the system on-board storage. The system itself is run by a separate PC to which it connects via a USB interface (there's a USB hub internal to the system, hence the spare USB port).
I've been able to format the USB flash drive and give it a label which shows up when the device is plugged into any computer. However, the drive letter associated with the device will vary from PC to PC since each PC may have a different number of drives already installed when I plug my system in. Is there a way to use my label to either address the flash drive directly, or at least to determine its drive letter within labview?
Thanks for your help
Paul Morris

Here they are in LV8.0
Attachments:
FindLabel%20with%20Batch%20File[1].vi ‏9 KB
FindLabel%20with%20DOTNET[1].vi ‏12 KB

Similar Messages

Time machine can't mount disk ,hard drive,after its been formatted for windows

i want to use time machine but it can't mount disk as it has been used with windows

You will need to repartition and reformat the drive for use with OS X:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

When I try to get the key code for office it tells me its already been used. My mac had a new hard drive in its first year, could it be because of this? How can I get the office I've paid for but never used?

My mac had to have a new hard drive in its first year. Now, when I try to get the key code for office it tells me its already been used. How do i get the office I've paid for but never used?

The product key is sent to you by email as part of the purchase confirmation.
If you have lost it, log into your Microsoft account.

Can not fine external hard drive for time machine sence lion was installed

I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.

I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices). Since I installed Lion, my Time Machine and this 1TB drive (and its partitions) is finicky. Sometimes it is mounted and sometimes it is not. This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista. I am beginning to think that Lion is the new Vista. Sorry for the latter, just venting... b/c this ain't the first issue with Lion.

Time Machine can't copy my hard drive

Time Machine can't copy my hard drive, it says that it can't complete the safety copy because an error occured when files were copied to the safety copy. Does anyone recognise this problem? All I could find in System notifications about Time Machine is this: "localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)"

John Galt wrote:
... Are you unable to select the external HD as a backup device?
pres92 wrote:
that's the problem -- my hard drive ("startup disk) is not listed, so I can't select it.
The reason is that the startup volume is not a valid selection for its own Time Machine backup.
The only drive listed is the Time Machine external drive. Obviously, I don't want to back up the time machine drive.
By default, a Time Machine backup volume is excluded from being backed up.
The appearance you describe is correct, otherwise I'm completely misunderstanding your problem.

Can you use external hard drives with the HP Omni 10 5600US

Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.

Yes you can. You'll need to purchase a USB OTG (on-the-go) cable. I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.

How can I erase my hard drive if the Installer can't find it?

Our iBook, 10.3.9, was pretty reliable for 5 years, but it started to work slower the past days (maybe thru too little free space or too many programs open at the same time), so we restarted a lot.. until it didn't restart but came up with the question mark; then with a black screen/white letters asking for a login. But what is my login? I only know my admin password.
I ran DiskUtility and repaired the permissions and wanted to repair the disk as well, but it said (in red letters): unable, could not unmount disk.
I tried Archive and Install, but it stopped halfway and said there was an error, try again later. I didn't try again, but managed to save most of my documents to another iBook (10.4.3) thru FireWire Target mode.
Then I was ready for Erase & Install.
When I first got this iBook, I had a big accident and had to erase and install, at which time an Apple tech person advised me to first install 10.1 and then 10.2 ('cause this iBook was first made with 10.1, it had 10.2 when I bought it). So this morning I put my 10.1 install CD in and selected Disk Utility to Erase the hard drive. This was recommended in another thread to erase all faulty blocks on a computer. I must say the hard drive itself (below the '27 GB OSX' thing with the triangle in front of it) was already greyed out, but I selected this triangle thing and said erase.
Then I went back into the Installer but... it can't find any hard drive to install OSX on. It shows just one blank space...
The strangest thing is that one time this morning when I opened the iBook, it started up just like normal! But it worked too slow, it wasn't fine, so I restarted and then the problems came back just the same. Now I'm back atthe black screen with white letters. It makes me think though that not all is lost with this computer, which my family hopes with me.
What can I do???
ibook Mac OS X (10.3.7)

Cornelius,
ask as many questions as necessary! I know it is a confusing situation.
Your profile lists OS X 10.3.7.
I believe I upgraded last year to 10.3.9.
Do you have a Full Retail Version of Panther available for re-install?
Yes.
What OS version(s) do you have a full retail version for?
For 10.1, 10.2 and 10.3.2.
Do you have an OS currently installed on your computer?
I don't know...
This morning I had set my mind to do the Erase & Install. I inserted the 10.1 disk, opened DUtility and selected "Erase" from the tablist. At that point the hard drive under the top-triangle was already grey I believe. I selected the top line, or the grey line, am not sure which was last. The computer started to spin. I can't tell if it erased anything at that point. But I know that once the computer stopped spinning its operationwheel, I quit DU and went on trying to install, but then there was no installation disc available. There was just a blanc field.
There was nothing else to do but restart, and at that point the computer opened up with a desktop like normal. I know it sounds crazy.
But it didn't work well. I could open a jpg-file in "Preview", but went in "Mail" and it took forever to open a message, at which point I restarted.
And since then, the normal desktop hasn't shown up anymore.
Whenever I restart, I keep getting stuck at 1. a flashing icon with the picture of a globe, which changes into
2. the question-mark, then
3. the window "Mac OS" with the blue stripe, filling up almost all the way and then
3. a black screen with white letters. If I type something and press return, it asks for password. If I type anything and press return, it says 'login incorrect', and then I see a new screen with "Darwin/BSD (X-3.local) (console)..... next line: "login: "
I don't know what my login could be.
I have since started up from the 10.3 CD, but also only saw a blank field where there should be an icon of my hard drive. (at 'select destination').
Since my post, I used my Apple Hardware Test-CD, and that gave a pass. It said "No device found" for AirPort and Mass Storage. "Device found" for Modem and "Passed" for Logic Board, Memory and VideoRAM.
In any case, what I want to do is still to Erase & Install, because something seems to be very wrong and my stuff is safely backed up.
Looking forward to your answer. Thanks a lot.
ibook Mac OS X (10.3.7)

How can I fix my hard drive?

I have this nag of a PowerBook that I can't seem to fix. Before I send old paint out to the glue factory, I'd like to try to at least try to get some use as a web & email machine for a while. Here's the problems:
1 - CD-DVD drive is shot. Can not install anything from CD-DVD drive. Don't want to invest in a replacement drive.
2 - The somewhat infamous "2007-004 security update" of this past April sort of killed this machines ability to connect to wireless networks. There are many threads on these forums on how machines running 10.3.9 had an adverse reaction to this security update. My machine never recovered.
3 - Can not use PowerBook in target disk mode. It starts up in target disk mode and shows up on my iMac's desktop BUT if I try to access that disk, everything just hangs and I am forced to yank the FW cord after watching the beachball spin for 10 minutes. Same goes for trying to use Disk Utility or DiskWarrior in target disk mode.
I am willing to do a full archive and install on it if I can just do that somehow. Can I try to run Disk Utility or DiskWarrior in some other manner? Or is time to bury Ol Paint?
PowerBook G4 Titanium Mac OS X (10.3.9) 500MHz - 20GB HD - 768MB RAM

Well, Gary, it sounds like you've got a mess there. Since you can't fix the hard drive, maybe replacing it is the answer — but only maybe. Given its problems, the Powerbook has essentially no market value as anything but parts, so the only investment in it that might make any sense is a new hard drive, which (installed in a Firewire enclosure) could be used with any other Mac even if it doesn't result in your being able to use this one again. If the present drive has a mechanical problem, that may be why FWTDM doesn't work for you now, and a new drive should take care of that problem.
On the free side, you might consider downloading and installing Security Updates 2007-005 and -006, which have resolved the problems inherent in -004 for most users. (Once bitten, twice shy, I know.)

How can I erase my hard drive?

I just sold my computer. How can I erase the hard drive? Thanks1

To prepare it for sale you should follow these instructions:
What to do before selling or giving away your Mac
In addition to the above:
If you enabled FileVault, disable it in System Preferences > Security & Privacy.
"Deauthorize" your iTunes account. Same for Audible if you have one.
System Preferences > iCloud > de-select "Back to My Mac" and "Find my Mac".
Sign out of iCloud. Select "Delete from Mac" when it appears.
Then:
Start your Mac with its original System Installation DVD (if your Mac shipped with one) or OS X Recovery (if it didn’t).
Remove any Open Firmware password if you created one: select Firmware Password Utility from the Utilities menu and remove it.
Select Disk Utility from the Utilities menu.
Remove any partitions you may have created.
Select the Mac's hard disk icon, then select the "Erase" tab.
Select the "Security Options" button and erase the disk.
The more "securely" you erase the disk, the longer it will take. The fastest method is sufficient since all but the most expensive techniques and equipment will be able to recover securely erased data.
When it finishes, quit Disk Utility.
Select Install Mac OS X from the Utilities menu. Do not create any user accounts.
When it finishes, shut down the computer.
If you want to install the bundled apps that were included with your Mac, restart by using your Applications DVD and install the bundled apps.
Don't forget to include any DVDs that came with your iMac, your AppleCare certificate if you bought it, printed documentation, even the box if you still have it.
Execute a bill of sale showing the Mac's serial number.
Once no longer in your possesion, remove the Mac from your devices in My Support Profile.

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Can i download a hard drive from a PC to a MAC?

can i download a hard drive from a PC to a MAC?

karma715 wrote:
can i download a hard drive from a PC to a MAC?
Is this what you mean...
Setting-up a new Mac from an old one, its backups, or a PC

Can I plug the hard drive from my Time Capsule into my PC?

My laptop's hard drive recently died and the chance of being able to recover any data from it is pretty slim. To make matters worse, i've been meaning to buy a new Time Capsule for a while as mine is no longer functioning correctly (won't let me connect even with a solid green light).
I'm hoping that's the fault of the rest of the Time Capsule, and not the hard drive and its contents. So, would it be possible to plug the Time Capsule's hard drive into my Windows PC and somehow recover the data from there?
Thanks!

The only files you can recover are ones you put there.. so the only way and the only person who knows the answer is you.. where did you put the files?
Did you put them in a new folder under the share, data.. then that is where they will be.
If you put them inside the sparsebundle.. you are dead. But if you created a new directory inside the sparsebundle you might still get access to it.. there is only one way to find out.. have a go.. !!
BTW if you did this, that is why you have issues.. putting files inside a sparsebundle will destroy it. Not a great idea. But it is allowed.
Who can know these things.. YOU.. and YOU ALONE.
You might find it cheaper in your case to repair the TC..
If it is Gen 1 or 2, type "Time Capsule Power Supply" into ebay.. without the ""
There are some there to help you fix it.
Or a repairer could help.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s
It is much easier to get your files back from a working TC.

Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Time Capsule can't backup external hard drives connected to it. Got that.

Hello Apple Support Communities! This is my first post. Hope this finds you all well My first year as an Apple user. I bought a 2-Tb TC and am running my first backup to my MacBook as I write this.
Problem statement: TC can't backup external hard drives connected directly to it, but the ones connected to the Macs that are connected wirelessly to it. Duly noted. However, the Spotlight will reindex the hard drives connected to the Mac and that will take hours; the whole backup will take days. Thus, excluding the hard drives at "System Preferences > Spotlight > Privacy tab" will probably help reduce the time of backup, or just ejecting them will do too. That itself has not proven effective coz it's still taking forever (50Gb in 2 days, still going).
Questions:
1) Do I wait until my first backup to my MacBook's internal hard drive is done before I connect my hard drives to my MacBook and attempt another backup? If yes, how do I go about the excessive time Spotlight reindexing takes if I intend to backup my hard drives connected to my MacBook?
2) Is there any other way of speeding up the first-time backup?
*Note: All versions of OS and firmwares are up-to-date. TC is connected to an external wireless router. TC is intended to be used as backup device and / or file server only.
P/S: Apologee if this has already been discussed before, thus, a link to previous discussion thread would highly be appreciated)
- Shook Hashem, Malaysia.

How do I backup the externel hard drives connected to my MB. I was under the impression that that has already been done, because I've read it somewhere in a discussion that said it's done automatically unless I exclude it from a backup, which I didn't. So it's supposed to backup the external hard drivestoo because I had them connected to my MB the entire time during the backups.
By default an external drive is excluded.. the list is odd.. if I plug a drive into the mac.. it immediately is listed as excluded.
This is not the list of included.. this is the list of excluded.. remove it from the excluded list to include it.
It is kind of reverse polish notation in backups.
If I want to enter the Time Machine, should I enter it with the TM turned on or off?
Not sure what the question means. If you use the star wars display and want to recover files then use TM off.. but read up pondini.. how to do restore etc.
http://pondini.org/TM/FAQ.html
15A in particular on the how to use TM.
When do I uplug the ethernet and use the wireless connection instead?
Once you have finished the main backup you can go back to wireless. The incremental backups are mostly very small.

Can I use one hard drive for two computers? Newbie here.

Newbie here.
I currently use Time Machine for my iMac (Intel)
I've been using my Macbook Pro (Intel) a lot lately and would like to back it up from time to time as well.
Can I simply attach the external hard drive to my Macbook Pro and set up Time Machine?
Can use the external hard drive for both machines?
Will Time Machine recognized that my Macbook Pro is a separate computer and set up a separate folder on the external hard drive automatically?
Thanks

Hi,
you can use the drive for as many Macs as you like, just make sure it's big enough. Time Machine will create separate folders for your Macs and will "know" which one you're using.
Björn

Can I address a Hard drive by its volume label, rather than its letter?

Similar Messages

Maybe you are looking for