Can i adjust the automatic white balancing on an hp pavillion g series webcam?

The question is as simple as the title.
If it can be done, could someone instruct me as how I would go about doing so?

Hi
Please find the link given below might help you to resolve your issue.
Adjusting the Webcam Settings to Improve the Video Quality
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

I can not adjust the automatic download for music, apps and books at the iPhone and the iPad. where is the mistake?

I can not adjust the automatic download for music, apps and books.
This is a problem by my iPhone and my IPad.
Where is the mistake??

Settings > Store > Change the settings you want.

Can you remove the camera white balance setting in Aperture

I have a Canon 7D and use Aperture for processing and storing my images.
With the Canon I shoot both video and still and frequently adjust the white balance in the camera. I make a frequent mistake in leaving the wrong white balance setting on - eg when taking video indoors in the evening I set the white balance to indoors (the Canon seems poor at white balance decision making on video) and then I forget I'm not using auto white balance and switch to taking a photo with flash. The result is a horrible blue photo - which if I don't spot the problem at the time seems very hard to correct afterwards.
I use the Aperture white balance adjustments frequently but unless there is a patch or white or grey I an use the dropper on, I find this particular situation seems to be right off the scale of what I can fix in Aperture. I end up with sliders at the extremes of the scales and no intuitive sense of what numbers to type in manually to try and get realistic colour - so I often end up discarding these photos even if the shot itself is something I'd like to use.
So my question is given I'm importing RAW, is there a way to show the phoo without the (wrong) white balance setting I applied in the camera, to let me choose white balance from scratch?
Or if not, do you have any advice about how to adjust from this very bluey unrealistic colour of image?

Kirkby - thanks for the quick reply.
Didn't know you could drag inside a value field - that's helpful.
But being able to get different numbers on the slider isn't the root of my problem.
In a specific example I have two photos - one taken with white balance set to flash and the photo was with flash, where after a bit of tweaking to get the colour I want the temp slider is at 5000K (and tint 0). The second photo has my shooting error with interior lighting white balance but taken with flash. The two shots were taken from almost the same point of the same view (but different people in frame). The shot with the white balance error comes off camera horribly blue coloured. I can fiddle with the two sliders - I take temperature to 20000K and tint to 40 to do the best with it I can, and with those settings one of the two faces is approaching flesh colour but the wall behind the subjects (which is a light blue in reality) is now appearing light yellow in places. I just can't get a good looking colour effect no matter ow extreme the slider settings.
I may have phrased my question badly - as I totally agree you can't show a raw without a colour setting - so maybe I'm better asking to be able to use a different colour setting on the raw data rather than having to start with adjustments on top of my white balance mistake.
Given the two shots were in the same place against the same background and the same lighting (both with flash) it seems to me I ought to be able to get a similar colour effect on both and I just can't. To illustrate here are the two photos (the one on the left was shot with flash wb and in Aperture I'm viewing it with 5000K and 0 tint, the one on the right was shot with indoor wb and in Aperture I'm viewing it with 20000K and 40 tint and it looks terrible!)
https://www.box.com/shared/qle3t6ovyhrd1egez3vc

How can I turn off Automatic White Balance/Correction?

Hi,
I shoot color Infra-Red images. White Balance is handled in Camera - and then in Photoshop. As a new user to Lightroom 2 - everytime I view/click on an image in the Library - the color/balance of the image changes to a deep red, and I lose all of the vivid colors that I had from the original image. The files are Nikon NEF RAW - and I am looking for a way to turn this automatic change in colors off. Can anyone help?
Thanks and have a great weekend !!!
Dave

Hal,
I have a Nikon D-70 that has the Lifepixel infra-red conversion. Take a look at their website and you can see the great color infra-red pictures that you can take with this converted camera. So there is my problem - I can set the camera at a PRE White-Balance and shoot Cyan/Blue/Green photos - and then import them into Lightroom. I see the photos in the Library - but as I click on them to view them, they change color to Red. Now if I set up the camera to take White Balance as Auto - or pretty much anything else other than the PRE (for which I can adjust), I will also get a Red photo. Red is OK if you want to convert to B+W - but if you want to retain all of the colors, I need to keep the color that the camera shot - without Lightroom changing them. I looked at the history - and only have an import/date. Other than clicking on it to view - no changes have been applied by me - yet. I will try to shoot them as jpg's - the ones I am working with right now were shot in the summer. We have -20 Deg. C. here right now - so Infra Red camera is in bag - have no green leaves to shoot. Looking through preferences and settings to see if I can find a "turn-off"....... Actually - let me load the photos with Bridge and see what they look like there..........
Dave

Adjusting exposure and white balance in LR?

I'm fairly new to digital photography and want to start using LR for more than just tagging my images. I currently shoot with a 5DM3 at the highest .jpg quality settings.
1. Can I adjust white balance for .jpg files in LR? OR does it really need to be done with a RAW format file?
2. Can I adjust exposure compensation for .jpg files in LR? OR does it really need to be done with a RAW format file?
3. If I can fully adjust the white balance and exposure compensation in LR for a .jpg or RAW file, is there any real benefit to doing it in camera? Will you achieve the same quality level doing it in LR vs. in camera? Are there any downsides to doing it in LR vs. in camera?
Thanks!

southwestform wrote:
1. Can I adjust white balance for .jpg files in LR? OR does it really need to be done with a RAW format file?
Yes, you can adjust white balance on .jpg files. There will be two differences. For a raw file the adjustment scale will be along an absolute temperature scale so you can set, for example, an exact 6500K white balance. For a JPEG the adjustment scale is relative because the white balance is already baked into the file. The other difference is that with raw, you will be able to push white balance much further from the current setting before the image starts to fall apart.
southwestform wrote:
2. Can I adjust exposure compensation for .jpg files in LR? OR does it really need to be done with a RAW format file?
Similar answer. You can adjust exposure up and down for a JPEG, but you will find a much narrower range of adjustment before the image visibly degrades. It will be easier to darken the image than to lighten it. When you increase exposure on a JPEG, shadows you lightened will look much worse a lot faster than with a raw file.
southwestform wrote:
3. If I can fully adjust the white balance and exposure compensation in LR for a .jpg or RAW file, is there any real benefit to doing it in camera? Will you achieve the same quality level doing it in LR vs. in camera? Are there any downsides to doing it in LR vs. in camera?
The problem in any editor (not just Lightroom) is that your files, raw or JPEG, have been limited by the dynamic range of the sensor in the camera. You can't "fully" make adjustments if the camera can't "fully" record the scene in the first place. If you want to make a +4 EV adjustment to an image and you do it in camera, the image data is in the sweet spot of the sensor and it's going to look great. If you don't adjust in camera and you expect to make the +4 EV adjustment in an image editor, you are going to try to push a lot of shadow data up into the lighter tones. The shadow data is the lowest quality, so lightening it will reveal noise and banding. In addition, if your camera doesn't have enough dynamic range, the camera might not even record down far enough for you to pull off a +4 EV adjustment in software. The better sensor you have, the more likely you can make big adjustments and like the result.
Raw just gives you more room to make mistakes. It is always better to try and get it right in camera.

I can not adjust the calendar in profilemanager

I can not adjust the calendar in profilemanager, in group settings, try to create a profile to calendar automatically adjusts for each user when it is installed on the client machine fails (failed). If the profile is set manually, the message - "The Calendar Account payload could not be installed. An attempt to create the account securely failed"

I think it might be becasue the Profile Distribution Type in the General payload is set to "Automatic Push" and you have an incorrect password for the calendar account. Try switching the Profile Distribution Type to Manual Download and leavign the password blank so the user has to enter it when they try to add it.
There's a weird thing where the calendar password field becomes "required" in Automatic Push mode in which case not only must there be characters entered in the field but the password must be correct for it to work. Not great for a profiel intended for more than one person.
Good luck,
Willhaus

How can I adjust the skin color of only one person in the photo (Elements 11)

How can I adjust the skin color of only one person in the photo (Elements 11)?
Thanks for your help.

From your question, I assume you know how to do it for all persons :
Menu : Enhance/Adjust color/adjust color for skin tones
So what you have to do is to do the color correction on a layer copy. Concentrate on the person to enhance and ignore the rest of the picture.
When you are satisfied, add a mask to the layer copy and fill it with black.
Set your foreground color to white
In the layer palette, click on the mask icon on the right of the layer icon.
Then use a brush to paint white on the skin of the person to reveal the correction.

Windows can not adjust the brightness on this display

I have a Toshiba Satellite LX835-D3300 ( Serial #ZC119804Q )
I want to brighten my display, but it tells me..... Windows can not adjust the brightness on this display.
In my HELP section on my computer it tells me to...
Tap or click PC and devices, then tap or click Display
Make sure the Adjust my screen brightness automatically slider is turned on
Get the best display on your monitor - Microsoft Windows Help
(If you don't want the screen brightness to change automatically, tap or click the Adjust my screen brightness automatically slider to turn it off.)
Tap or click Apply.
I do not have that.
I notice that if I go to the side of my screen and then click on Devices, click on projects... "Second Screen" is showning
I clicked on it and then I went and clicked on PC screen only and it is highlighted, but when I go back to it, it stills shows "Second Sreen"
Please help me. What am I doing wrong

All-in-One LX835-D3300
Downloads here.
Have you upgraded to Windows 8.1? If so, did you follow these instructions?
How to Update from Windows 8 to Windows 8.1
-Jerry

I can't adjust the size of the video in my project, as If it was blocked but it is not blocked. What I do?

Suddenly I can't adjust the size of the video in my project, I touch the screen video but it don't let me change it's size, as If it was blocked but it is not blocked. What I do?

he white screen not appear. Is like if the video is protected but no. I was using it and suddenly it didn't let me work on it. Sorry, my first lenguaje is not english.
Enviado por Landy
WhatsApp 993-2625005
El 23/07/2014, a las 20:31, shooternz <[email protected]> escribió:
I can't adjust the size of the video in my project, as If it was blocked but it is not blocked. What I do?
created by shooternz in Premiere Pro - View the full discussion
You may need to explain this better.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6578343#6578343
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I'm getting audio in voiceover only on the right side in iMovie.. how can I adjust the pan. Both right and left work in Garageband but not in Imovie.

I'm getting audio in voiceover recordings only on the right side in playback. How can I adjust the balance? I'm using an external mic and preamp that work fine (both channels) in Garageband, so it's not my recording setup. Balance is Ok using internal mic but the sound is not as good.

When you share your project, use SHARE/EXPORT USING QUICKTIME.
Click Options.
In the Sound settings/Channels, choose MONO.
In the Video settings, choose the codec of your choice (probably h.264) under Compression.

On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843>

How can I adjust the font size of my printouts?

I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer. Since I changed to this computer, my printouts have very small font size making them hard to read. How can I adjust the font size of the printout? Is it a computer or printer function? I appreciate the help.

I, too, am frustrated. This seems like something that would easily be handled within the application software. However, none of the fixes I've been offered have been very helpful. My cousin sugested using Control C and Control V to move the text to WORD. Once in WORD, you can manipulate the text on a WORD page...sometimes. I've had good and bad luck with this method. It still requires working in two different programs to get it legible. Does anyone else have a 4500 All-in -one with this problem, or is it only me? Thanks, [Edited for Personal Information]

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
Windows Computer

1) If you are talking about the file names on the computer, there is a
setting to turn off known file types. Open your file browser. Then
just under the location bar, press '''Tools,''' then '''Folder Options.'''
A new window will open. Select '''View.''' Look for
'''Hide Extensions For Known File Types.'''
2) Never NEVER '''NEVER''' download anything unless you know what
it is. If a web site claims it needs to download something, what is it?
It could be something like the flash player, '''or a virus ! !'''
Ask questions, or go somewhere else.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

How can I adjust the font size in iTunes 11?

How can I adjust the font size in iTunes 11? Specifically, when in Artist view both the text in the sidebar and the track listing are huge.

How to change fontsize in iTunes
Take an XML-Editor and open:
"C:\Program Files (x86)\iTunes\iTunes.Resources\de.lproj\TextStyles.plist"
For other languages change your country code (de, en, fr, pl ...).
Example for english: "\en.lproj\TextStyles.plist".
Backup this File !!!
To change the Text-Size, change the integer value of the following item:
"<key>size</key>"
"<integer>8</integer>"
This means Text-Size 8
"<key>size</key>"
"<integer>12</integer>"
This means Text-Size 12
To change the font, change the integer value of the following item:
<key>font</key>
<string>Arial</string>
This means the font changes to Arial
This also works:
<key>italic</key>
<true/>
<key>bold</key>
<true/>
<key>underline</key>
<true/>
Example of common Text Properties:

<key>1033</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

<key>1034</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3 (bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1021</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 1</string>
        <key>font</key>
        <string>Segoe UI Semibold</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1022</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1023</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 3</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1024</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 4</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1001</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 1</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1002</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9002</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small)</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9029</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small Bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>5</integer>
    </dict>

    <key>1307</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font (selected)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>3</integer>
    </dict>

    <key>1304</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>7</integer>
    </dict>
Hope this helps.

Can i adjust the automatic white balancing on an hp pavillion g series webcam?

Similar Messages

Maybe you are looking for