Can i airplay audio without video?(Airport Express)

What happens if i want to listen audio from my streo but watch from ipad? Can i do that? Airport doesn't have video out.

ON the express there is a 3.5 mm audio output jack which u connect to your stereo using RCA cords this will allow u to play and view whatever want on your ipad and output sound through your stereo.

Similar Messages

  • Can I strem audio to my airport express? but not only iTunes

    Can I stream audio to my airport express? but not only iTunes. where can I suggest to Apple make some about it?

    Hello keer. Welcome to the Apple Discussions!
    Can I stream audio to my airport express? but not only iTunes.
    Yes. To stream audio, other than from an iTunes source, to an AirPort Express Base Station (AX) you will need a third-party product, like Rogue Amoeba's Airfoil.
    where can I suggest to Apple make some about it?
    You can submit suggestions to Apple at the following link: Apple Product Feedback

  • AppleTV2 can't stream audio to my airport express

    Dear Apple Support,
    I just bought a brand new AppleTV2 (2nd generation) today and wanted to get my Apple setup just perfect - but AppleTV2 second generation dissapointed REALLY! You should definitely stick with AppleTV 1st generation.
    AppleTV2 can't stream audio wirelessly from to for example you hifi-system. This is REALLY a downgrade!
    I really hope that Apple's amazing development team will fix this as soon as possible via a software update.
    The baseline of this comment is:
    AppleTV 1st Generation can stream wireless audio to Airport Express.
    AppleTV 2nd Generation can not stream wireless audio to Airport Express - which is a MAJOR DOWNGRADE!
    Best regards,
    Poul Rói Mohr

    poulroi wrote:
    This is REALLY a downgrade!
    some would think so, but it is what it is

  • Can you connect an iMac to a Lynksys router without an airport express

    can you connect an iMac to a Lynksys router without an airport express or base? I tried running it from cable>modem> wireless router and it doesn't sling to the iMac. The airport card in the Mac does seem to be on, and there is a network connection set up. It's an intel iMac7,1. I'm not familiar with Mac, I'm trying to help out a friend.
    At my house I have the same configuration going  from my PC to an old Mac laptop and it works fine.
    I think my friend had her wifi network set up properly, or it wouldn't be showing in the list of networks when I check.
    the router is a Lynksys WRT160N V3.
    Oh, and if I do run her computer trying to use the wireless, I don't get an internet connection at all. I have to have it hardwired straight to the modem.
    Sorry I've asked this twice, but I haven't had any luck. I must just not know where to find things on the Mac. I did try other places in forum before posting again.
    Any ideas? Thanks

    We don't know a thing about your iMac or what version of OS X it's running so it's very difficult to help you. Please note that information and also please complete your profile, then that infomation will be listed when you post in your next thread. You can complete your profile by clicking Your Stuff in the upper right of this page then click Profile and fill in the pertinent information.

  • Can you connect an iMac to a Lynksys router without an airport express or base?

    can you connect an iMac to a Lynksys router without an airport express or base? I tried running it from cable>modem>router and it doesn't sling to the iMac. The airport card in the Mac does seem to be on, and there is a network connection set up. It's an intel iMac7,1.
    At my house I have the same configuration going to an old Mac laptop and it works fine.
    Any ideas? Thanks

    Csound1--
    If you mean does the network appear on the Mac when I look for it, then yes.
    I think my friend had her wifi network set up properly, or it wouldn't be showing in the list of networks when I check.
    the router is a Lynksys WRT160N V3.
    I don't think she has the security code so I can check what's actually hooked up (the network name on screen at least appears to be locked). She's had the computer out to the shop and back recently and has never even run anything off the wireless.
    I have a feeling I'm going to have to call her cable provider to sort it out. I'm hoping to avoid that. I don't know Mac at all. I could troubleshoot on my PC.
    Ultimately, I want to be able to hook a Roku box to her TV to run Netflix.
    Any help would be greatly appreciated.

  • Play DVD with audio sound via Airport Express speakers

    Is it possible to play my DVD with audio sound via my Airport Express speakers?
    I can play music with iTunes trough these speakers, it would be nice if I can hear my DVDs aswell.
    iMac intel core duo   Mac OS X (10.4.7)  

    Not using Front Row.
    The real issue here is that audio and video stream at different speeds and it is hard to maintain sync. You know how when you hit play within iTunes it takes a while for the song to start through the speakers? It's the same with the DVD. So you'd need to work an offset into the audio when playing a DVD and it's not an exact science.
    You can download VLC player and mess around with the offset, then you'll also need a program like Airfoil to be able to force audio through the airport express.
    Good luck!

  • Can i stream safari to my airport express?

    Can I stream safari to my airport express?
    3rd party software like airfoil is a posibility but I think its a bit odd that I, using a mac omputer and a mac airport extreme, need to buy software to connect these two. So is there an other way to fix this?

    Can I stream safari to my airport express?
    I assume that you mean: Can I stream web-based audio files to the AirPort Express Base Station? That is, audio files not originating from iTunes ... correct?
    If so, then (as far as your iMac is concerned) you already answered your own question with Rogue Amoeba's Airfoil. For iOS devices, you can use AirPlay with audio sources other than iTunes.

  • Video files are playing audio without video (just a black screen)

    Video files are playing audio without video. It just shows a blank screen. These same videos work just fine in Chrome, thogh.

    Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Recording audio without video

    Is there any way to record live audio from a mic and
    streaming it through FMS without having to have a webcam plugged
    in? Is there way to use another video source other than a webcam,
    such as an existing flv?
    thank you.

    Sure... you can record audio without video. It's the same as
    recording both... just don't attach the camera to the netstream.
    As for adding another video image... that one you can't do.
    You can only play once source over a stream, so video from one
    source and audio from another can't be played across a common
    stream.

  • Can I link a chain of airport express devices to use as wifi extenders?

    Hi all,
    At work we have a large warehouse, office at one end, offices at the other end and warehousing in the middle (to keep things simple) .  I would like one single wifi network for the whole building so I can link up Filemaker to iPads, iPhones, Macbooks etc.  I have bought two Airport Express devices and put them at two ends of the building but they don't reach each other so I've temporarily set up two wifi networks.  I will need a 3rd, maybe even 4th Airport Express.
    My question is this:
    Can I form a chain of airport express devices to use as wifi repeaters from the first?  i.e. Can a repeated wifi signal be repeated again?
    Or in other words... say I have 4 airport express devices (A, B, C, D) and only A is linked to the network with a cable...B repeats the signal from A. (A is out of reach of C and D).  B repeats the wifi signal from A to C...C repeats the wifi signal to D...will this work/is it possible?
    Thanks!
    p.s. hopefully I haven't confused you too much

    Hi - Tesserax is right - you can't do this wirelessly but I notice that you say that you have temporarily set up two wi-fi networks - does this mean that you have access to ethernet connections - if you do and the distances aren't too long, then you can do it by placing wired base stations where their wi-fi would overlap - you would then set up each to create a wireless network with the same name, password and security type - and as long as they are on the same subnet, you would have a roaming network so that clients can move from one "zone" to the next without having to re-connect - I have 2 parallel networks using 8 Extremes and 2 Expresses connecting 3 hangars and 3 offices and it works great.

  • How can I set up an older airport express using the newest airport utilities?

    How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up.  Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
    Thanks for any suggestions 

    How can I set up an older airport express using the newest airport utilities?
    Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
    Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
    See this thread for more details and instructions:
    https://discussions.apple.com/message/21397085#21397085

  • Airplay disrupts transmission with Airport  Express 6.2 and OS X 10.8.3 Any fixes known?

    Airplay disrupts transmission with Airport  Express 6.2 and OS X 10.8.3 Any fixes known?

    Looks like this is a known issue which has been fixed for Java 8:
    https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

  • Can't drag audio and video together?

    I have numerous assets in this dvd project. I'm setting up a button to play 10 commercials in a row, a "play all" button.
    I'm editing the 10 commercials in what looks like a mini-video editor, with the video track and audio tracks shown.
    PROBLEM:
    When I grab the video to change the order of my "play all", the audio doesn't move with it. For instance, I'm shifting commercial #3 to become commercial #1. In order for Audio from Commercial #3 to become audio for commercial #1, I have to shift audio #2-10 over to the right to create space for Audio Commercial #3 to insert there. VERY FRUSTRATING and painstaking. And if you accidentally clip a bit off the end or front of an audio portion (easy to do in these tiny little tracks), the sync' is off for the rest of the spots!
    I called Apple "tech support", and the rep' told me you can't drag audio and video together, and made up some excuse about 'this should already be done in Final Cut'. What? I'm just bringing in QuickTime files as assets. Why can't I lock audio and video together?
    Incidentally, Apple's Tech Support is useless you spend $199, or "$799 for a year". This cost was NOT made clear in the original purchase of the product. I'd prefer spending $1000 for a "PROFESSIONAL APPLICATION" and have good tech support included!
    Arrrrgh!
    G4 dual 1.25 gig - 1 gig ram   Mac OS X (10.3.8)   DVD Studio "Pro" 4

    Once in the track, A and V don't get moved together.
    I usually just rebuild the track order from scratch anyway because you can easily lose sync easilly when you are shuffling clip order.

  • HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
    http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

  • Airport utility can't read settings on my airport express after down loading update to yosemite

    airport utility can't read settings on my airport express after yosemite update

    I already did that & it works but i shouldn't have to do it at all, only started after update.

Maybe you are looking for

  • Using the BAPI_QUOTATION_CREATEFROMDATA

    Hi All, I want to know how to use this BAPI: BAPI_QUOTATION_CREATEFROMDATA in 4.6C As iam getting the error: E VP 112       Enter the value SOLD TO PARTY or SHIP TO PARTY. And iam passing SOLD TO PARTY or SHIP TO PARTY values below. =================

  • IE 10 appending unselectable=on

    I am working on a website. In the UI, a dropdown menu is not working. Using the Dev tools, came to know that IE 10 is somehow appending "unselectable=on" for the <div> which contains the dropdown menu. The code does not have anywhere unselectable att

  • Making a flash animation into link

    > This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3271770931_3721276 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: 8bit Hi all Cou

  • Sereen exit for me21n

    Hi  All, am using the screen exit in me21n i.e in item data i.e. MM06E005    & also i found the screen but where should i declear the internal table i.e global decleration. am using table control into the subscreen. so plz give me steps or any sample

  • Saved bookmarks not showing website icons

    I have all my saved bookmarks and they all work,but instead of having the little icon of the site,they have what looks like an explorer logo in front of it.Ex.ebay would have the ebay logo in front of the bookmark.