Can I and how do connect power mac to imac so I can use imac display

Is there a way I can use my imac and power mac together.
My purpose is to use the display of the imac when using the power mac.
If it possible please be so kind to tell me how to.
Thank you!

Hi Howard Herrick;
I doubt it because to the best of my knowledge you are only going to find connectors on the iMac to connect and external monitor to it not to connect another computer to the iMac's screen.
Allan

Similar Messages

  • HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
    The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
    Hope this helps.

  • I purchased Mountain Lion on my MacBook and want it on my mac desktop as well. Can I download the same purchase on my desktopMac? and how do i do that?

    I purchased Mountain Lion on my MacBook and want it on my mac desktop as well. Can I download the same purchase on my desktopMac? and how do i do that?

    Welcome to the Apple Support Communities
    When you purchase Mountain Lion, you can install it as many times as you want on all your computers for free. To install it on the desktop, open the App Store, go to Purchases tab and download OS X Mountain Lion.
    Another option is to redownload it on the MacBook, put the installer onto a USB drive and connect it to the desktop in order to upgrade

  • How can I uninstall conduit from my power mac?

    How can I uninstall conduit from my power mac, and keep it off

    Adware removal Conduit
    http://www.thesafemac.com/arg-conduit/
    Best.

  • How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
    (119682)

  • Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • Can I and how, copy CS6 from my Mac to macbook?

    Can I and how, copy CS6 from my Mac to macbook?

    Hello Kevin, to my knowledge it#s like this:
    On a 32bit OS Photoshop CS6 is installed only as a 32bit version. The 32bit version of Photoshop can be used just for older plugins.
    On a system with a 64bit architecture, you can install the 32bit version optional.
    To use all features, you should use the 64bit version (which requires a 64bit OS).
    Photoshop CS6 for Mac OS is available only as 64-bit application. Therefore the elder and 32-bit plug-in will not run.
    Hans-Günter

  • How to connect my mac book pro to network printer Canon IR 2010f?

    I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

    The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
    What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
    If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
    So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
    One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

  • Multiple users, devices & Apple IDs in the house. Can we, and how would we, use Home Sharing?

    We have three users in the house, each with their own Apple ID, using multiple mac/PC devices.  Can we and how would we use Home Sharing to share music, apps, etc? 

    Do you have a computer. You can't share music or apps from one mobile device to another. To share photos you need to use photo stream shared albums.

  • How to connect my mac to tv

    How to connect my mac to tv

    Ponny wrote: just a regular TV with an Svideo in.
    This could be an issue with that vintage Tv.
    Svideo is more fitted for video player input.
    Go to http://eshop.macsales.com/ to see what options are available.
    If you send them an email, they will help if you don't see option.
    Prior to sending them mail, select the exact model you have from the
    list of the MacPro's and any other details.
    Is there a reason your still at 10.4.11?
    Also, Apple Tv streams to my Tv's.
    May just have to do a Craigslist search and pick up a worthy Tv with HDMI ports.

  • How to connect my Mac to the tv screen

    Can someone explain to me how I can watch on the (big) tv screen the downloaded content from my laptop?

    How to Connect a Mac Computer to a TV: 11 Steps - wikiHow
    How to connect Macbook to TV (the simple way) - YouTube
    How to Connect a Mac to a TV with HDMI for Full Audio ...
    how can i hook up my mac book pro to my tv - Apple Store ...
    Connect Your Mac to Your HDTV - About.com
    Tutorial: How to Connect MacBook Pro to High Definition TV (HDTV ...

  • How to connect my MAC Book Pro (2013) to a display?

    how to connect my MAC Book Pro (2013) to a display?

    When you have connected the monitor or the TV to the MBP, open System Preferences>Displays and it should show a category called Arrangement.  These links should give some of the details:
    http://support.apple.com/en-us/HT204154
    http://support.apple.com/en-us/HT202351
    Ciao.

  • How to connect my mac to only one wireless network?

    How to connect my mac to only one wireless network?

    Do you mean that there are several wireless networks within range, and you don't want it switching between them?

  • I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • Up as an untitled deviceon it. Can I and how ?

    I have a card reader plugged into my Mac PC and it shows up as an untitled device. I want to put one of my picture albums on it. Can I and how ?  I have not had a computer long and I am learning. I'm 65 and never thought I would ever have a computer.

    A card reader must have a memory card in it to do anything - it is a "reader" - not a storage device
    If you attach the card reader to your computer and put a memory card in it then the memory card should show in the finder
    To put photos on the memory card launch iPhoto and select the photo(s) and export (iPhoto menu ==> export) to a desktop folder - then go to the finder and drag that folder to the memory card
    LN

Maybe you are looking for

  • How to delete files from external ntfs hard disk [Solved]

    Hi guys first, sorry for my bad English. I have an external hard disk ( WD 500GB ) with ntfs file system and i have installed ntfs-3g package. 3 days ago, when i wanted to delete some files, i get a problem with it, look the output : [jahangir@Arch N

  • Trying to Save (menu or cmd-s) a file always opens Save As dialog

    Hi, First post (hello forums) - any help would be much appreciated. Please be kind if this is a no-brainer for the gurus out there. I'm on a Mac G5, OSX 10.4 running CS3 - upgraded from PS7 about 3 weeks ago. All was humming along nicely until this m

  • Error_: ACS10002: An error occurred while processing the SOAP body

    Hi all, We have problem to connect MSCRM online via SDK since yesterday.   All of our MSCRM Online organizations have this issue.  Anyone has the same issue?   Error : ACS10002: An error occurred while processing the SOAP body. ACS50000: There was an

  • DIR no. not showing after creation of DIR from Easy DMS

    Dear Friends, I could able to create DIR from Easy DMS. But I could not able to see DIR no. after creation, so that I do not document created or not ? If created what is the no. I need to open thru search or other way. Is it standard functionality. C

  • Help with blackjack code.

    For some reason, my dealer's cards don't print out correctly.import javax.swing.JOptionPane; * Created on Nov 28, 2006 * TODO To change the template for this generated file go to * Window - Preferences - Java - Code Style - Code Templates * @author j