Can I apply proc amp filter to entire sequence like in Avid land?

Was up against a white sky and dark skinned people. Of course I exposed for the skintones,
so now I'm stuck with non-broadcast safe white levels. When in Avid land I remember being able to
create a new video track and apply the proc amp filter there. Is this somehow possible in FCP 6?
Yes, it's for air, and yes, I know broadcasters have limiters. Any suggestions?

Nesting the Sequence will allow you to apply a filter to eveything at once.
Another way, do one clip and adjust the filter to your taste. Right click that clip on the Timeline and copy it.
Highlight all other clips, right click and choose "Paste Attributes > Filters" That will apply the same setting to all the others and you can still tweak individual shots if they don't look quite right.

Similar Messages

Need to apply a video filter to entire sequence...

Hey gang-
I'd really like to apply some filters (such as some color correctors and such) to an entire sequence. Same filter on all video. Copy and paste seems like a terrible waste of time, and short of exporting it and "flattening" it to it's own quicktime, I don't know how.
Thanks in advance....

Many ways:
1. Do it for one, then use the Select All Tracks Forward button (one of the forward arrows in the toolbar next to the audio meters) and drag the name of the filter from the Filters tab in the first clip onto the selected clips.
2. Do it for one clip, then copy the clip. Select all the others, then ctrl-click and go to Paste Attributes. Then select Filters.
3. Create a new sequence, then drag the old sequence into the new one. This will nest the sequence. Apply the color correction to the nested clip. This is probably the most flexible as it is much easier to make changes to the filters later on.

Can I fix the black level with the proc amp filter in FCP?

Again, trying to help my dad convert old vhs tapes to DVD. A proc amp is a bit outside his price range and probably a canopus box that handles setup is as well.
Can this problem be fixed after capture? I noticed that final cut has a proc amp filter built into it but the documentation on it is sparse at best.
If it can be fixed what settings do I need to use with the proc amp filter? Will using this filter be the same thing or will it just be "darn close"?
Is there any way I can verify it is indeed a black level problem by looking at the scopes in final cut?

i don't like the fcp proc amp filter but you could capture a bit and see if it's gonna work. i would capture a bit and apply the black level control on the 3 way color corrector and follow it all the way to dvd.
if these vhs tapes are precious and critical, why not rent a tbc and undergo a marathon capturing session?
OR! rent a dvd recorder and record direct from the vhs player and let the recorder handle everything for you.

Applying a transition to an entire sequence?

Is there a way to bulk-apply a transition to an entire sequence? For instance, if I have a multi-clip edited with just straight-cuts, and want each cut to be a cross-dissolve? It takes forever to apply a transition to each cut afterwards. Thank you!

Set your default transition.
Then select the complete sequence timeline and drag it into the canvas choosing the overwrite with transition.

How can I apply an image filter to an entire Applet?

Hey there,
I was wondering, is it possible to apply an image filter of sorts to an entire applet rather than to images? I'm writing a little game in java for a university project and basically I'm only using functions like drawrect and drawpolygon etc, and I want to apply fairly simple filters like blur etc. Is there any way I can achieve this kind of effect with the draw functions?
Thanks
-Spec

You might do better in the 2-D or Swing forums.
I don't have an answer, but it's an intriging problem. Basically you need to get all the components to paint themselves into the graphics context of an offscreen buffer, then apply the transformation, then paint the buffer onto the screen.
(Some hackery must be involved though. For instance blurring, by definition, means that components will have an onscreen appearance outside their bounds. So you are sort of fighting against Swing's painting mechanism - if a portion of your applet, close to but outside the bounds of a particular component, becomes visible that component will have to redraw itself, although Swing won't know that.)
2-d - http://forum.java.sun.com/forum.jspa?forumID=20
swing - http://forum.java.sun.com/forum.jspa?forumID=57

How do I apply a desaturation filter across entire timeline?

I'm wondering how to apply a desaturation filter across the entire timeline of a short film I've built without having to drag and drop the filter into every clip (there are many). Is it as simple as copy/paste, because I tried that and it didn't seem to work.
Thanks in advance for your answers.

A couple of ways to do it:
1. Apply the filter to one clip and adjust as needed. Copy the clip (Command c). Select (highlight) all other clips to which you want to apply the filter, right-click on one and select "Paste Attributes." When the Paste Attributes window opens, click the Filters box on the Video side.
2. Apply the filter to one clip then adjust as needed in the Viewer window's Filter tab. In the Timeline, select (highlight) all other clips to which you want to apply the filter. Drag the filter from the clip in the Viewer to the highlighted clips in the Timeline.
-DH

How can I apply the same filter to multiple inboxes?

I am looking at transitioning from Outlook to Thunderbird -- mostly for the Google calendar integration.
The one thing I am having problems with is the filters. I have multiple email addresses and I would like to be able to apply one filter to all of the email addresses. Ie: I get an email from Bob sent to me on my email address 1 and the email goes to bob's folder. Then I get an email from Bob on my email address 2.
I would like to have the same rule to be effective for both of my email addresses so if bob uses either email address, the mail goes to bob's folder.
Right now it appears that I have to create a unique filter if I get email from 'bob' on email address 1 vs email address 2. Am I missing something?

Nope. Thunderbird's filters are specific to accounts.
You could set them up in one account, then copy that account's ''msgFilterRules.dat'' file to your other accounts.

How can I apply group policy but exception some users like administrator?

Hello all.
How can I set a group policy and apply it to users exception the administrator ?
Cheers.

Hello,
please see
http://www.grouppolicy.biz/2015/03/how-to-stop-local-administrators-from-bypassing-group-policy/if you talk about local administrator accounts. In shortyou CAN'T.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Can't apply Smoothcam

For some reason I can't apply the Smoothcam filter to a clip in my timeline. Does it have anything to do with the fact that the speed is adjusted?

I don't know but it will only take a couple of seconds to make another copy of the clip at normal speed and try the filter again.
Remember that the filter works on the whole of the "clip" so if it was ten seconds from a complete DV tape captured in one go it will take days to process as the whole tape will be evaluated.

Effect to Affect Entire Sequence?

Is there a way to apply an effect to an entire sequence without nesting the sequence into another sequence? In avid you just apply an effect like a matte to an empty video track above a large section of video and affect a whole range of clips. Is there a way to do that?
I'm also wondering if there is a way to remove effects from a selection of clips without loading each clip individually in the browser?
Thanks,
S

Other than using the method Jim mentioned (which also works for copying attributes (filters etc) to other clips.
Add effect to first clip.
Get it looking the way you want.
Select all other clips you want the effect to affect.
Open FILTERS tab in viewer.
Click and drag effect or effects to selected clips in timeline.
rh

Super white - proc amp - clipping - YUV to RGB

I have been investigating the issue of clipping with YUV to RGB conversions (from DV) and found that as Stu Maschwitz pointed out in DV Rebel, there are a couple of ways to save the higher dynamic range of YUV video without clipping when converting into RGB for editing and effects. The Premier Proc amp function works in YUV and does this as does the interpret footage color management tab in AE.
HOWEVER. It seems something may have broken the proc amp effect in CS5 as it no longer seems to save super white and super black values. Perhaps there is now another recommended way to save the higher dynamic range that some DV and HDV cameras will capture in YUV?
Also, there is no longer a "maximum bit depth" setting in Project settings, so maybe this is where things got broken, as in earlier versions of Premier that setting on was required for proc amp to work correctly.
I took some DV footage that has 110% signal highlights and tried to adjust it in CS5 proc amp and it was clipped. The same footage was recoverable in AE CS5 with the interpret footage color management tab "wide Gamut RGB". This footage also is recoverable with proc amp in CS3 and CS4 Premier.
Any suggestions??
David

Hi Guys,
Without opening a new thread, I just wanted to say that I can't get ProcAmp to work on my footages. And I remember it worked in the past.
I have footage from Nex-7, D4s, GoPro Hero 3 Black. At least on the GoPro & Nex-7 footage it was easy to recover highlights. But when I try it now, I just grey out the highlights without recovering anything.
Original here:
ProcAmp applied:
Of course, Maximum Bit Depth is enabled in the sequence. I cleaned the cache, I enabled Maximum Render Quality as well, and also tried with Mercury on/off.
Any suggestions in fixing this?
Thanks a lot,
Bogdan

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
Open an Mp4 movie
Choose filter, lens correction
Choose dii
choose Phantom FC200
click ok and the image improves.
I then save as a name.psd and close the file.
I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
What am I doing wrong? If you can help me I would be very grateful.
Marc

AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

Trying to filter an entire database using a combo box or text box

Hi,
I am looking to create a combo box with rows vice columns, then I would like to create a macro or some for form of filter that gives me the option to search within each or all of the selections.
I have created a search function (using a textbox and the button features) that allows me to search for anything in my database using applyfilter. The problem that I ran into with this was that when I hit the might work, but only the first line worked.
So I tried to use a combination box to create a filter of the fields that I want to view for the particular search I need, but I want to select row headers vice columns of information. For example if I have five fields of: Last Name, First Name, SSN, Document
number and Unique ID.
I want a combination box to show the following field header when I click the drop down option.
(Last Name
First Name
SSN
Documentation Number
Unique ID)
Then I would to apply a macro filter feature for files within theses individual fields. I am just getting started in VBA and using Macros, so any help would be awesome!!
If I am too far off target please direct me back, I tend to over think things.
Thanks in Advance

Dirk Goldgar, I tried to you use the suggested method you gave me. Part of the problem I was having was that I wanted to view the field list, which I now know is very possible thanks to you, but only wanted it to show as one single list of fields.
So took the information you gave me and went on to create a list box instead. I later found out why this was not working either.
In what way was it not working? You can do the same thing with a list box as I described for a combo box.
I have relationships of tables attached.
I don't understand what you mean by that last statement, or how it's relevant to the discussion. Do you mean you have multiple different tables that you might want to filter? So you would need to either (a) first need to select a table from a
list of tables in your database, and only then select a field in that table, or else (b) have a table listing all the data elements you might want to search, with the table and field name of each, and base a list box on that -- then the code to search would
know what table to select from, as well as what field to filter on.
So this info that you provided was very helpful. I will continue to go through the link you provided.
So I can quickly sum up what I need:
1. A dropdown box that allows me to search any Field List
2. A textbox that allows me to type in the searchable information for that particular field.
3. Or some way to build a filter function for the whole list, with a textbox to search the key words.
This is all still a bit unclear to me, because I don't know whether you want to search a particular table, or any of many possible tables in the database.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

Can you design a filter in a sequence and then save it?

I made a cool little filter that consists of a couple of alpha video files that I might like to use for future videos. Is there any way I can save it as a filter in my effects/filters folder in final cut Por 5. or in my favorites folder. Thanks I appreciate your time!

"Files" don't make a filter, "Filters" in the Viewer's Filter tab make up a filter. You apply that to video Files, or clips. If you have created an effect by applying Filters to a group of composited clips in the Timeline, you can save those clips in a Sequence of their own, which can be copied and pasted to other Sequences in other Projects.
If you mean just the filters, yes, you can stack up a ton of filters in the Filters tab of the Viewer, and save them as a Filter Pack.

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

Can I apply proc amp filter to entire sequence like in Avid land?

Similar Messages

Maybe you are looking for