Can I aska question regarding a reseller in South Africa ?

I was looking to purchase a macbookpro recently and while visiting a site of some "official reseller" I am starting to wonder if this reseller will not be causing a negative experience for users looking to buy apple products. I have emailed3 times and have yet to receive any response about products and pricing.
Message was edited by: FrisChris

Welcome To  Discussions FrisChris!
Can you post a Link/URL to the site?
ali b

Similar Messages

  • Got an iPhone 3G, but can't use most of the features in South Africa-HELP!

    Hi there.
    I got my iPhone about 4-5 months ago in South Africa. I love the hardware, I love the way it looks, what you can do with it, etc. But there's one thing I find really really annoying, and that is the fact that I can't use the phone features that users in other countries have access to.
    No, I haven't run into any technical problems.
    The problem is that we have hardly anything available in our iTunes store. I invite you to switch your iTunes browser to the South Africa store and check it out... Yup, that's right, we have no music, movies, TV shows, podcasts or audiobooks. So what do we have? Some apps... yep some, but from the looks of it a greatly reduced list. Many apps I've found links to on the net, which people recommended, are simply not in our store. Even free apps, for example Google Earth.
    But the most glaring omission is the Games category... yep, not a single game available to South African users.
    So, to get an iPhone here requires a 2 year contract and another $300 on top of that for the 8GB version, so it surely isn't cheap... and yet I can't even make a custom ringtone because only music downloaded from the iTunes store can be used... I could do that on my very first Nokia phone which was a dinosaur w.r.t. technology compared to the iPhone.
    I honestly don't understand it...
    So, what help do I need?
    I need to find out who I can contact at Apple to reason with regarding the content of our iTunes store. I find it unacceptable that people who hack their phones have a FAR better experience than people who do the right thing. So, if you work at Apple and read this or you know someone at Apple that could perhaps help me find the correct person/people to talk to about this, then please please send me a mail with the appropriate details. My email address is [email protected] (yes, I'll even post my email address on a public forum )
    I don't think I am being unreasonable to expect a good level of service for a high end product, and at this point I am really unhappy with the service. Not the customer support etc, in fact the people I've had contact with are helpful, except that they cannot provide me with the information I need.
    If you can help, then thank you very much.
    Take care.
    - Emile

    Hi there.
    Thank you neuroanatomist for the info on creating a ringtone. I'll try it.
    I should perhaps have mentioned that I have tried all the official channels, including contacting support and sending feedback over the last couple of months. The support people sympathise but can't really help me and I haven't received anything w.r.t. the feedback I have sent, more than once.
    I'm now turning to the other users in the hope that someone can get me into contact with a person/people inside Apple that might be able to shed more light on this.
    I've already contacted our local distributors and my mobile phone provider and they have told me that it is Apple and only Apple who decide what is available in the store.
    W.r.t. licensing etc, I suspect that there may be some legalities involved here, however it's not like we are on a different planet - we get the same DVDs and movies and TV programs here as everywhere else - just not on the iTunes store... So once again everything points back to Apple and not to local laws. As far as I know our laws w.r.t. media are pretty standard and mostly based on UK law, but I am no legal expert.
    I would even be happy to get a "we know it's not great, we're working on it", or a "it may take some time, but hang in there" ... but I haven't even been able to get that... which is extremely frustrating.
    Take care,
    Emile.

  • Question regarding capability of Illustrator

    i received an eps with transparent background, i need to edit the eps (change colour) and the save it back as eps with transparent back ground. am i able to do this with illustrator? cause i know it doesn't work in photoshop.
    please help.
    thanks.

    This is goofy, but is meant only to hopefully address what seems a common misconception among Photoshop users:
    "EPS" is a meta-format. It's a "container" or "wrapper." It can contain vector object, raster objects, text objects.
    So you can't really talk about "editing" or "converting" or "exchanging" or "opening" EPS files with various programs without considering (and specifying) the
    content of the EPS.
    An EPS containing nothing but a raster image can be opened with Illustrator, but you won't be able to do much with it, because Illustrator can't do much with raster images. An EPS containing only vector paths can be "opened" with Photoshop, but it will be rasterized when you open it.
    Think of EPS as a "shipping container." You can:
    1. Use a steam shovel in South Africa to dig up a load of raw diamonds.
    2. Put the raw diamonds in a shipping container.
    3. Put the shipping container on a boat.
    4. Take the boat to Austrailia.
    5. Put the container on a truck.
    That doesn't mean the truck can float. Nor does it mean the truck can convert the raw diamond to cut gems. And if you open the container, you may find the content in a less desirable state than when it was originally enclosed.
    JET

  • I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I will address your second question.
    First, make sure your iPhone and iPad have absolutely identical Apple IDs.  If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option.  Lo and behold, all your iCloud notes should appear on your iPhone.

  • I have read all the questions regarding the "Can't send photo using iMessage".

    I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
    It will try to send but it will get stuck just before it sends
    and the red ! will appear with the "Not Delivered" status.
    When i tap on the !, it just says "This iMessage was not delived".
    No other message or photo is sending as the same time as the photo.
    I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
    What's wrong?!?!?!?!

    It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • Questions regarding FaceTime: When I call someone, it rings but they can't answer and when someone calls me via FaceTime it won't even ring.

    Questions regarding FaceTime: When I call someone, it rings but they can't answer and when someone calls me via FaceTime it won't even ring.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Question Regarding MIDI and Sample Accuracy

    Hi,
    I have 2 questions regarding MIDI.
    1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
    2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
    I've looked through the manual, and couldn't find any specific answer to these questions.
    Thanks!
    Message was edited by: Matthew Usnick

    Ok, I've done some experimenting, and here are my results.
    I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
    Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
    I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
    SO.
    Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
    This is very good news, and glad I worked this out!
    (if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
    Message was edited by: Matthew Usnick

  • Question regarding homehub and Open reach router -...

    Hi all,
      I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
      I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
      Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
    Thanks, .

    Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white).  The HomeHub has its own power switch, the modem doesn't.
    There is something wrong if the HomeHub needs to be turned on before the modem.  As others have said, in general best to leave the modem on all the time.  You should be able to connect them up in any order, or together.  (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
    Check if the router can connect/disconnect from the broadband using the web interface.  Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • **question regarding 3G and wif**.

    I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
    Thanks

    You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

  • Question regarding Dashboard and column prompt

    My question regarding Dashboard and column prompt:
    1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
    2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

    Hi Toony,...
    I think there was another way of doing this...
    In the dashboard prompt go to Show option > select SQL Results from dropdown.
    There you need to write your Logical SQL like...
    SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
    Here.. Periods.Year is the column which is already exists in repository's presentation layer..
    and difference of date functionality is the code or formula of column which you want to show in drop-down...
    Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
    I think it helps you in doing this..
    Just check and inform me if it works...
    Thanks & Regards
    Kishore Guggilla
    Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

  • Questions regarding customisation/configuration of PS CS4

    Hello
    I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
    Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions

    NyanPrime wrote:
    <answered above>
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions
    2.  No.  It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5.  It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
    3.  Not sure, since I haven't tried it.  However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
    4.  What buttons are you talking about?  Those you are creating in your document?  If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
    5.  There are many, many options for positioning and sizing panels.  Most start with making a panel visible, then dragging it somewhere by its little tab.  One of the important features is that you can save your preferred layout as a named workspace.  Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created).  The name of that menu is a little confusing.  Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
    You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
    As an example, I use two monitors, and this is my preferred layout:
    6.  No, it's not possible to affect the layer names Photoshop generates, as far as I know.  I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
    Hope this helps!
    -Noel

  • Question regarding ONT connection via Ethernet and Cable cards

    Hi,
    We recently upgraded to Fios Quation 150Mbps/65  plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
    I have 2 questions regarding this new setup:
    1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
    Quiestion 2.
    Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system  via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room. 
    Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct? 
    Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet?  and would this setup affect in any way the propper functioning of the cable boxes in the house?
    I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
    Cheers.
    Solved!
    Go to Solution.

    It's not valid to have two devices connected to the ONT, PC and VZ Router.  Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
    Other options:
    1.  Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
    2.  Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
    Hope that helps.

  • I have some questions regarding setting up a software RAID 0 on a Mac Pro

    I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
    These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
    A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
    The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
    Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
    It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
    My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
    I should be most grateful to receive advice regarding the following questions:
    QUESTION 1:
    I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
    If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
    Or would I have to reinstall the OS, applications and software again?
    I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
    QUESTION 2:
    I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
    Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
    Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
    QUESTION 3:
    Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
    Or would this not be of any use anyway, in the event of a single drive failure?
    QUESTION 4:
    Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
    QUESTION 5:
    If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
    Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

    Well said.
    Steps to set up RAID
    Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
    1. Open Disk Utility (/Applications/Utilities).
    2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
    3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
    4. Name the RAID set.
    5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
    6. Click Create.
    Recovering from a hard drive failure on a mirrored array
    1. Open Disk Utility in (/Applications/Utilities).
    2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
    3. If an issue with the disk is indicated, click Rebuild.
    4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
    5. Repeat steps 1 and 2.
    6. Drag the icon of the new disk on top of that of the removed disk.
    7. Click Rebuild.
    http://support.apple.com/kb/HT2559
    Drive A + B = VOLUME ONE
    Drive C + D = VOLUME TWO
    What you put on those volumes is of course up to you and easy to do.
    A system really only needs to be backed up "as needed" like before you add or update or install anything.
    /Users can be backed up hourly, daily, weekly schedule
    Media files as needed.
    Things that hurt performance:
    Page outs
    Spotlight - disable this for boot drive and 'scratch'
    SCRATCH: Temporary space; erased between projects and steps.
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    (normally I'd link to Wikipedia but I can't load right now)
    Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
    To help understand and configure your 2009 Nehalem Mac Pro:
    http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
    http://macperformanceguide.com/
    http://www.macgurus.com/guides/storageaccelguide.php
    http://www.macintouch.com/readerreports/harddrives/index.html
    http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
    http://kb2.adobe.com/cps/404/kb404440.html

Maybe you are looking for