Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.
Similar Messages
-
How to get calender in f4 help for select options in module pool (URGENT)
Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amrutaHi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu -
Freely Programed Help for select-option field
Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ? -
F4 help for select options based on parameter value
hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PMhi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM -
Problem on Search Help for select-option
Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
based upon
MULTIPLE Selection,
selected by the user,
in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynprofield = 'BUKRS'
dynpprog = sy-REPID
dynpnr = sy-dynnr
multiple_choice = 'X'
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
BUKRS-SIGN = 'I'.
BUKRS-OPTION = 'EQ'.
BUKRS-LOW = RETURN-FIELDVAL.
BUKRS-HIGH = RETURN-FIELDVAL.
APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m. -
Can't find the Collective Search help for Customer in VD02/VD03
Hi
I ave (I hope ) an easy question for you -
I need to extent the Collective search help for Customer in VD02/VD03 with an additional elementary search help, but I can't find the name of the Collective Search Help (F1 -> Technical Information only gives Search help '=')
So, where do I find it ?
Regards
Morten NielsenOK I Found it - Called DEBI
Regards
Morten Nielsen -
Value help for select-option not filling selection field
I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
i_id = 'SHORT_D'
i_description = 'Program'
it_result = lt_range_table
i_read_only = read_only
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George -
Value help for select options (pass the selected values to the select opt)
Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N. -
F4 Help for select-options.
Hi Experts,
I need to use F4 help for a select - options field from a particular table.I have written the below code and it worked well.
FORM sub_show_help.
SELECT bukrs
FROM zfica_accurate
INTO TABLE gt_accurate.
delete ADJACENT DUPLICATES FROM gt_accurate.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_CMCODE'
window_title = 'COMPANY CODE'
value_org = 'S'
multiple_choice = 'X'
TABLES
value_tab = gt_accurate
return_tab = gt_return.
s_cmcode-sign = 'I'.
s_cmcode-option = 'EQ'.
LOOP AT gt_return INTO gw_return .
s_cmcode-low = gw_return-fieldval.
APPEND s_cmcode.
ENDLOOP.
READ TABLE s_cmcode INDEX 1.
IF sy-subrc = 0.
gw_dynpread-fieldname = text-018.
gw_dynpread-fieldvalue = s_cmcode-low.
APPEND gw_dynpread TO gt_dynpread.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
IF sy-subrc <> 0.
MESSAGE i003.
ENDIF.
The problem is , I need to create a new type for s_cmcode(select-option ) field with the same structure as the select-option and the code is as below. I have created an internal table gt_sfield similar to s_cmcode . I have replaced s_cmcode with gt_sfield but the below code is not working. Its the same as the above program but its not showing up the values in the field.Could anyone please help me.
fORM SUB_SHOW_HELP.
SELECT BUKRS
FROM ZFICA_ACCURATE
INTO TABLE GT_ACCURATE.
gt_sfield[] = s_cmcode[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'BUKRS'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
WINDOW_TITLE = 'COMPANY CODE'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = 'X'
TABLES
VALUE_TAB = GT_ACCURATE
RETURN_TAB = GT_RETURN.
LOOP AT GT_RETURN INTO gw_return.
gw_sfield-SIGN = 'I'.
gw_sfield-OPTION = 'EQ'.
MOve gw_return-fieldval to gw_sfield-low.
APPEND gw_sfield to gt_sfield.
ENDLOOP.
READ TABLE gt_sfield INDEX 1 INTO gw_sfield .
IF SY-SUBRC = 0.
gw_dynpread-fieldname = 'S_CMCODE'.
move gw_sfield-low to gw_dynpread-fieldvalue.
APPEND GW_DYNPREAD TO GT_DYNPREAD.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = GT_DYNPREAD
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
UNDEFIND_ERROR = 7
OTHERS = 8.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE I003.
ENDIF.
ENDFORM.Hi,
The fucntion module 'DYNP_VALUES_UPDATE' should be used only for updating the screen field values. In your case you are updating the internal table using this function module.
Thanks
Pavan -
HI ALL,
please help me.
i need to get f4 help for zlsch field, if i give only one company code its working fine , if u give 2 company codes its not working,even though i kept s_bukrs-high code.
please help me
its urgent
s_bukrs FOR lfb1-bukrs no intervals OBLIGATORY,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
data : l_dyname type standard table of DYNPREAD with header line.
l_dyname-FIELDNAME = 'S_BUKRS-LOW'.
append l_dyname.
l_dyname-FIELDNAME = 'S_BUKRS-HIGH'.
append l_dyname.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = l_dyname
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh s_bukrs.
loop at l_dyname.
s_bukrs-low = l_dyname-FIELDVALUE.
s_bukrs-SIGN = 'I'.
s_bukrs-OPTION = 'EQ'.
append s_bukrs.
endloop.
SELECT zbukr
zlsch
FROM t042e
INTO TABLE gt_t042e
WHERE zbukr IN s_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield ='ZLSCH'
dynpprog = sy-cprog
dynpnr = '1000' "sy-dynnr
dynprofield = 'S_ZLSCH'
VALUE = '*'
value_org = 'S'
TABLES
value_tab = gt_t042e
RETURN_TAB = return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3Hi,
The code will not get executed for s_zlsch-high.
Put the code in which you are using the function module for fetching the values in a PERFORM.
Call this perform twice.
Once for s_zlsch-low and once for s_zlsch-high.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
perform <perfname>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-high.
perform <perfname>.
Reward if helpful.
Regards. -
Search help for select options
Hi,
I want to give search help for a field on selection screen based on value in another field in same selection screen. I am using DYNP_VALUES_READ function module to retain the values and F4IF_INT_TABLE_VALUE_REQUEST function module to give search help and it works fine, but when i give multiple selections i am not able to read the values. Please help. Points will be rewarded.Hi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
bwkey LIKE t001k-bwkey,
END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
bukrs LIKE t001k-bukrs,
END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
Validation Section
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
value_org = 'S'
TABLES
value_tab = it_bukrs
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des
INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
Lesen des akt. Wertes von Dynpro
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy_repid
dynumb = sy_dynnr
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
IF sy-subrc = 0.
v_bukrs = dynpfields-fieldvalue.
ENDIF.
ENDIF.
SELECT bwkey FROM t001k
INTO TABLE it_bwkey
WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BWKEY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_BWKEY'
value_org = 'S'
TABLES
value_tab = it_bwkey
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Restrict F4 help values for select option
Hi All,
How to restrict the F4 help for select option in Webdynpro for ABAP based on some input.
Regards,
Karthick SHi Karthick,
Use OVS help. It will take your inputs for search and give you corresponding search value list.
Refer my blog, it will be helpful.
[OVS Help in WDA|/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap]
Thanks. -
Standard Match Code for Selection Options with Example
Hi Guys,
Can anybody tell me Standard Match Code or Search help for Selection Options.
ex: MBEW-MATNR , MBEW-BWKEY and MBEW-BWTAR. can anybody tell how to keep Search Help or Match Code for the Above Fields in ECC 6.0 with Example
Very Urgent.
Thanks,
Gopi.Well Gopi.. as per your requirement no need to use collective search help.
I guess you have three fields in selection-screen,out 3 fields you have two fields contains search help.
Create your user defined search help BWTAR ..
Check the below links for creation search help :
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Hope you got it.
Thanks
Seshu -
Find collective Search Help for partner function at runtime
Hi experts,
I have a screen very similar to VF05. When I enter the partner function, the corresponding field for the partner function, I want a collective search help to open.
If I enter the partner function - Employee responsible, then the search help PERM has to be called or for partner function Payer, I want the search help DEBI to be called. Can anyone let me know how can I get the related partner functions, without hardcoding for every partner function. Something similar to the VF05 report.
Warm Regards,
AbdullahHi,
Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
Steps for creating collective search help.
1) Enter the search help name and click on create.
2) Choose Collective search help radio button option as the search help type.
3) Enter the search help parameters.
Note that there is no selection method to be entered for a collective search help.
4) Instead of the selection method, we enter the included search helps for the collective search help.
5)We need to assign parameters for each of the included search helps.
6) Complete the parameter assignment by clicking on the push button.
7) Collective search help offers the user to obtain F4 help using any of the included search helps.
Hope this helps u.
thanks -
How can we create a Collective search help
Hi all sap experts,
How can we create a Collective search help on field OBJECT which allows to search tables
o ARCH_OBJ
o TOJTB (Search help: H_TOJTB)
on 2 tabs.
Thanks,
BasuHi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji
Maybe you are looking for
-
Hi, I upload two bmp images in se78. I maintained the image name in zreport. Using select qry i fetch the name and i want to diaplay those images one of the column in my alv report. Need Source Code for this. plz assist , Thanks. Edited b
-
Screen automatic refresh on a CommandButton action
Hi, I have made two functions on the Application Module of my project wich are called by 2 ComandButtons from the web page. One of functions create a new file on the table displayed on the page, I need that because that table must no be changed by th
-
We have SRM 5.0 being integrated with MDM5.5 for catalog management. The business requirement is to have some relationship between catalog items like Bill of Materials, Sales Kits, Substitutes and Related Items etc. which MDM2.0 suports. We would lik
-
Web Dynpro For ABAP(NET310) certification Help
hi, i have attended the training for Web Dynpro For ABAP(NET310) and want to do certification in that...plz help me on that if someone have certification Questions .. thx in advance... Dinesh
-
Is there any way to batch Word 2007 to PDF from Acrobat?
I am trying to put together my teaching portfolio and I have a lot of papers I had written in Word 2003/2007 and would like to convert them to pdf to include in my ePortfolio. I have been exporting to pdf one at a time but frankly, I have over 200 .D