Can I attach my video clips back together after I've split and edited them?

I had a long video clip that I split apart a bunch of times in order to trim at different points. Now I am left with a bunch of small clips. I want to highlight them all and reattach them to form one clip. Is that possible? I can't figure it out. Thanks!

Thanks for the posts. The reason I wanted to reattach the clips in my project was so that I could perform edits to the clips that would apply to all at the same time. But I found my answer. You can make your edits to one clip. Then select that clip and hit copy. Then you can select your other individual clips and hit paste adjustments (command+shift+v) to each. It worked well. Thanks!

Similar Messages

  • I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

    I have problems with my films that become slightly jerky after I have imported
    and edited them in iMovie and then burned them onto a DVD using iDVD.
    I can see the weak jerkiness when panning in both laterally
    and vertically.
    I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
    When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
    Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

    I have problems with my films that become slightly jerky after I have imported
    and edited them in iMovie and then burned them onto a DVD using iDVD.
    I can see the weak jerkiness when panning in both laterally
    and vertically.
    I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
    When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
    Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

  • How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

    How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

    Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

  • How can I watch a video clip in my iPad 3?

    I just got an attached video clip from my brother, sent to my hotmail. When I open the clip, it just shows an overcrossed play bottom! How can I watch a video clip in hotmail, using an iPad? Do I need to download an app or what? Please!?

    Well on a Mac you can install
    Flash
    Silverlight
    Perian
    VLC
    Flip4Mac
    DivX
    and many other codecs/tools to watch anything.
    Guess the iOS isn't really all that it's cracked up to be, ignoring the wider world out there.
    Your only choice to complain to Apple about closed devices they make, but of course they know this already and using the iPad as a cheap "netbook" halo effect device so you get to upgrade to a Mac, just like they do with iPhones and iPods.
    In the meanwhile they are slowly closing the door on OS X, a little at a time so it's not noticeable.
    Pretty soon the excuse will be "sorry I can't play your video you sent me mom, I've got a Mac"
    https://www.apple.com/feedback/macosx.html

  • How can I blend two video clips where they join side by side in one movie?

    Hello Marvelous Movie Making Minds,
    I am working with Adobe Premiere 6 on a Windows 7 machine.
    How can I blend two video clips where they join side by side in one movie?
    I know how to place two or more video clips together in the same movie, but how can I give them a bit of a blend just where they join?
    I have a PDF instruction manual and the built-in web browser instructions.  In the instruction manual in "Chapter 7: Superimposing and Compositing" it talks about the transparency of any video clip, and I understand that... but I don't want to make one or the other video clip transparent anyplace except where the two video clips join together with perhaps a bit of overlap.
    I'd like to make a little blur just where the two videos join in the middle... is this possible?
    Thanks,
    digi

    Aha that kind of blending.
    Have not used 6.5 in a loooooooong time.
    So this is from memory, hope i get this right.
    Set the two clip on top of each other
    Make a matte in Photoshop and superimpose this over the two clips.
    Go to the Transparancy Settings and set the top clip in video 2 to Alpha key.
    Screendump for matte:
    The right side is made black just for the forum but should be transparant.

  • Can PP make a video clip find its matching audio and pull it.

    I have a SEQ that i created. I made 2 copies of the same seq.
    Then i used the copy to ad the razamataz.
    Then i unlinked the audio and exported that to an aiff.
    I opened the aiff in soundtrack. Doctered it a bit and exported an aiff file from there.
    I reimported that aiff and put it back on the TL .It matched flawlessly.
    Then the client all of a sudden wants me to add another clip.
    When i open up PP the original seq was no where to be found.
    So is it possible to use the clip on the TL to pull the audio back to at least 1 clip at a time?
    Can premier ad that audio clip back to the TL (w/ handles) or am i just simply facing a replace clip and re-edit the video situation?

    Its not a large project.  38 clips, 9 SEQs, 14 composition elements, 4 audio elements
    I am gonna chalk it up to operator error why the original is gone.
    I think this is a straight up 'replace clips' and copy grade situation. Then i gotta reclean the audio.
    I did figure out that the fastest way to replace the audio clip was to 'reveal in 'project' , load to source monitor and pull the audio stream.
    Maybe CS6 will have the ability to "replace audio/video clip with original source" comand or something to that effect.
    Thanks for your responses.

  • How can i change a video clip format that will play on a PC to play on my MAC

    How can i change a video clip format that will play on a PC to play on my MAC

    http://www.flip4mac.com/ supports all but DRM formatted Windows video.  http://www.videolan.org/ and MPEG4Streamclip may support additional.  DRM Windows video may require running Windows natively on your Mac.  Or requesting the source give you an MPEG4 compatible format or Realplayer formatted file.  Running Windows is described here: https://discussions.apple.com/docs/DOC-2741

  • Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
    Quick answer:  Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
    If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.  If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

  • Can't select multiple video clips to import into iMovie

    Hi, i can't select multiple video clips to import into iMovie, it only lets me import one video at a time. Apple please fix in next update or if anyone has a solution please post.

    Obviously you can not select the video to import until after iMovie populates the list of videos that are available to be imported
    LN

  • How can I place a video clip in CS6 within an irregular shape

    How can I place a video clip in CS6 within an irregular shape please

    Many thanks. I should have mentioned that I meant for the video to be an irregular shape also. However from what you said I have worked it out so thanks again for quick response. Pete.

  • Can I take a video clip from the web & put it in a keynote 5.3 presentation?

    Greetings,
    hope someone understands keynote 5.3 better than I do. 
    Can I take a video clip from the web & put it in a keynote 5.3 presentation?
    If so, could you give me a few tips on how to do it?
    Many thanks,
    Roger

    Not all video from the web can be downloaded, the owner or the website may have prevented this.
    I will not describe how to download as doing so may be illegal, but you can Google and read what is and not possible.
    Once a file is downloaded legally, the file must be a Quicktime file, drag and drop the file onto a slide.

  • Can Shake make a video clip look poster like?

    I'm a very long time user of FCP. I'm looking for a software app that I can put on a video clip that will give it a "poster" or cartoon like or 2D animated look. If anyone's seen the 2008 Coca-Cola short film winner, this is what I'm looking for:
    http://www.ccrfa.com/ccrfa/
    Can Shake do this? FCP can give a poster-like look, but it's only a frame at a time. On a five minute video clip, that could take awhile...
    I'm willing to buy whatever software / hardware is needed, but I just want to know if I'm buying the right software.
    Thanks.

    Welcome to the discussions.
    This has been discussed a lot in the Motion and Final Cut Pro forums:
    http://discussions.apple.com/search.jspa?q=adventuresin+cellshading&objID=f656&dateRange=all
    and here:
    http://discussions.apple.com/search.jspa?q=cel+shading&objID=f1179&dateRange=all
    Patrick

  • When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

    When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other.  This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • How can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    how can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    thx, i can't see where you do that (access the function to slow the motion of a clip).  in the help file it says to 'right click' on the clip to access those functions but when i do i get these optios below (no motion, pan, zoom, pan and zoom).  i want access the speed/duration sliders.
    i would say the function isn't available at all, but i could be looking in the wrong place (although i have tried everything).
    thx for your reply.

  • How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

    How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

    Souvent eu ce problème,
    Je cree un dossier sur le bureau et glisse les photos à partir d'Iphoto dans ce dossier. Ce geste a pour effet de creer des copies dans le dossier.
    Il ne reste plus qu'à selectionner ces photos pour les envoyer en pièces jointes.

Maybe you are looking for

  • PI repository url does not work (PI 7.11)

    http://host:port/rep/start/index.jsp does not run. It gaves error below. What must i do? Thanks. Error Internal Error Internal error; contact your system administrator Unable to read configuration data (ExchangeProfile/aii.properties)

  • 24" iMac with dead pixels

    I haven't seen any threads about this so I figured I'd give it a go and see how many others have dead pixels. My first 24" that I took home from the Apple store had one single, almost not noticeable, dead pixel. Most LCD manufactures will not warrant

  • Date function not returning any rows

    I am trying to pull back rows for data of people who were born in the 90s      a.birthday >= to_date('01/01/90','dd/mm/yy')      and                a.birthday <= to_date('31/12/90','dd/mm/yy') I know that there is definately users born in the 90s in

  • Best Practices for SAP BPC

    Hi Gurus, Please provide some best practice for BPC or older version of BPC (outlook soft) on planning scenarios. regards kishan

  • Developing forums

    I need to provide forums for users . can any expert tell me how to develop forums. ,My thought techinially is that when the user submits the info in forum , i need to store the data in the flat file and then display back How does forum work?Does it s