Can I automatically synchronize Outlook (Windows XP) via Bluetooth?

Hi, I'll have my first IPhone in one hour. I have read a few forums in advance, and noted that there have been some Bluetooth issues. What I'd like to do is to have the IPhone and Outlook calendars and contacts synced automatically whenever the Bluetooth connection is established. Would someone be able to help me out, as I don't have any experience on IPhone? I'd prefer to have a hackless solution, but those are okay if there's no other way.
Thanks a lot for help - I'm off to get my IPhone now

iPhone doesn't sync via Bluetooth. Bluetooth is only for tethering, P2P games and stereo audio.
Sync contacts and calendars via USB or over-the-air using Google Sync or MobileMe.

Similar Messages

Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth

Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?

Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

HT204387 connect iphone 5s to windows laptop via bluetooth

I am trying to connect my iPhone 5s to my Windows Laptop via Bluetooth. The laptop can see the iPHone but cannot connect. What can I do?

Hello Rick,
Congratulations on your new iPhone 5s! To wirelessly sync your iPhone with iTunes, you need to be connected using a Wi-Fi network. I found an article that has the steps outlined on how to sync your iPhone wirelessly with iTunes:
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
You can find the full article here:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Help syncing zire 31 with windows 7 via bluetooth

I am trying to sync my palm zire 31 to windows 7 via bluetooth. So, far no luck! i want to know if it is even posible with my zire? I recently purchased my zire via ebay. So, I have yet to hotsync! help me Please! And, is this the best way for me to try to hotsync in the first place? I have tried repeatedly to hotsync via usb.....but no luck!
Post relates to: Zire 31

The Zire31 does not have a BlueTooth radio in it... The method you are trying will not work.
There are no USB drivers in Vista64 or Win7 64 bit, so syncing via a cable is out too.
Your option is using IrDA (Beaming). Please read the large "Windows7 and Vista HotSync instructions here" thread for some guidance.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

HT202157 can we connect IPad to Apple TV via bluetooth? How

Can we connect IPad to Apple TV via bluetooth? How

Can you be a bit more specific about what you're trying to do.
You must have a black AppleTV 2 or 3. AppleTV 1 doesn't support this.
iPad 1 doesn't support mirroring only Airplay from apps. iPad 2/3 does support mirroring.
Mirroring is enabled by clicking iPad home button wtice scrolling to leftmost screen, enabling Airplay and then the mirroring slider underneath.

Connect the iPhone to iTunes under Windows 7 via Bluetooth

Is it possible to connect the iPhone to iTunes under Windows 7 via Bluetooth?

No. File transfer by bluetooth is not supported.

Can I use an external GPS Receiver via Bluetooth?

Great phone. I used a Galaxy Nexus for over a year until I got this phone, but once I started using the Z10, I never looked back. The "Hub" is a GREAT feature, exactly what I use most of the time. Oddly enough, I was never much of a BB fan until the Z10.
Anyhow, I have bought several apps and accessories for the Z10. I rely on my Z10 a lot.
I still have (from my old Windows Mobile 6 phone days back several years ago) a perfectly working external GPS receiver that has Bluetooth (Holux GPSlim236). Great little receiver.
Since I often use my Z10 for GPS nagigation (I am using Mireo DON"T PANIC) for directions whilst riding my motorcycle all day long, with Bluetooth enabled to my helmet, having the GPS radio on as well as Mobile (aka phone) and Bluetooth does drain the battery faster than if I could avoid using the internal GPS at this time (I still want to use the internal GPS at other times). I do have a data plan, so I could use the internal maps, however, I often ride through places with no data access (back country).
I was able to pair the Bluetooth GPS Receiver to the Z10 (easy enough), however, there is no option in the "Network Connections" settings area to be able to disable the internal GPS radio, or anywhere else, so I can't tell for sure that this is working (that is, not using internal GPS but using external GPS). I suspect it is not using the external GPS Receiver, though, since Bluetooth settings indicate "no services" for the external Bluetooth device.
Is there a way to sometimes use the external Bluetooth Receiver on the Z10 (in order to save battery on long trips)?
It is also not just for battery power savings, but also when I ride there is no air conditioning, so the phone does get hot, and I suspect would be cooler if I used an external GPS receiver via already-enabled-anyways Bluetooth.
Thanks

I am not sure my original message was clear.
I have th Z10, it has GPS software and a built-in GPS radio receiver. I also have an external GPS radio receiver, not a GPS device. It is strictly a radio receiver. I used to use it years ago on my Windows Mobile device - the software with maps was on Windows Mobile, and the GPS receiver hooked up via Bluetooth.
The GPS receiver in the Z10 uses the Z10 battery. I have the Bluetooth on anyhow to connect to my helmet headset. Since Bluetooth is on already, I could save Z10 battery by using the external GPS radio receiver (disable the internal GPS radio receiver), thought the map software would still run on the Z10.
So, the previous response says "does have GPS profile" but also says "external GPS will not work:".
I am not sure the statement was respect to my setup.
What I really need is for the Z10 Bluetooth to see the external GPS receiver, perhaps as a serial device or as a GPS device, howsoever such things work, and for the GPS map software to use the external rather than try to use the internal (the map software should not really care, it should be the OS that virtualises the GPS port).

Can't "Browse Device" or "Send File" via Bluetooth

Hi,
I can't activate the "Send File" or "Browse Device" windows with any of my Bluetooth phones (N70 and T650i). I can do iSync using Bluetooth with them. I can send files from these phones to my iBook via Bluetooth. Nokia Media Transfer via Bluetooth works also. I've enabled Bluetooth Sharing (and File Sharing) in Sharing preferences.
The Bluetooth setting in the phones is such that all connections are always allowed
What's weird is when I installed Salling Clicker and when it needed to send the client program to the phone the "Send File" window appeared. This means that "Send File" is "working" (at least during Salling Clicker installation).
Any tips?
Thanks

It seems the Bluetooth File Exchange app can't launch from my Bluetooth menu icon. Manually launching from the Finder finally worked

Can Apple TV connect to air play via Bluetooth

Can you use airplay via Bluetooth or can it only be used via a wifi connection?

Welcome to the Apple community.
Wifi only, unfortunately.

Can't pair my beats wireless headphones via bluetooth

My air "sees" the headphones, but can't connect.

Contactizer does not support dialling via Bluetooth for the iPhone (partly because the iPhone does not have this functionality).
See this forum post on their Support pages:
http://objective-decision.com/forum/viewtopic.php?id=2299
Bluetooth between an iPhone and computer is only for internet tethering - nothing else.

Why can i not connect my iphone 4S via bluetooth to my macbookair?

i have tried to connect my iphone 4s via bluetooth and it says that my macbook air is not supporting this feature after i follow all the steps when connecting. Can someone help me with this problem?

The only thing you can connect an iPhone to your Macbook over BT for would be tethering, which would be done through the Personal Hotspot settings on the iPhone, not the BT settings. iOS doesn't support the BT profiles for trasferring files.

I have an iPhone 6 Plus and I can not connect to my iPad Air via bluetooth

I have been trying to activate Instant Hotspot, and for starters I wanted to connect my iPhone 6+ to my iPad Air via bluetooth. In both devices the "Forget the Device" setting is greyed out. I figured I needed to forget device as I had an older iPhone as recent as Wednesday and the two had different settings. Obviously, I need to pair the two devices but I cannot remove the old settings via "Forget this Device".
My secondary question; is Instant Hotspot available for iPhone users on AT&T that have unlimited data plans?

I'm afraid I don't have an answer, but I am having the exact same problem. I couldn't pair the devices and thought I could fix it by forgetting and reconnecting...but the "forget device" button is grayed out.
I've tried restarting both devices and have toggled bluetooth etc. If I figure something out, I'll post and let you know.

I can't send file from my macbook via bluetooth

I have this problem, I can't send files from my Macbook with bluetooth. When I click on send a file nothing happens, as if I didn't clck at all. I can still receive files though. It was working last week and I haven't changed my settings since. I checked and everything was still enable. I installed Mackeeper not long ago, I scanned the computer and made a cleanup shortly before it stopped working, I dont know if it could have been the cleanup, but it's troublesome since that was how I transfered my music on my mp3 player. I made a software update too and it didn't change a thing. Please help!! I don't know what to do!

I guess I'm stumpted. If the iMessage server is telling you that the recipient's email address/phone number is not registered with iMessage when in fact they are, somehow it's not looking it up correctly (as it is when you try from your phone). Signing out of the account in preferences, then signing back in is about the only thing I can think of to "restart" iMessage. I suppose you could try signing out again, then restart your Mac and sign back in. If you didn't restart your Mac after you signed out of iCloud, you could try that too. If none of that works, you'll probably have to contact Apple support for assistance.

How can I automatically "retract" all windows from my Thunderbolt display back to my MacBook Air when I disconnect the display, esp if the Thunderbolt is the desktop with the white menu bar?

I am in and out of my office with my MacBook Air. I would like to set it up so when I plug in my Thunderbolt display in the office, the Thunderbolt display has my desktop, menu bar and the open windows. If I set the Thunderbolt display to mirror by MacBook Air it adjusts to the lower resolution of the MacBook Air, which is a waste of a cool monitor. I can set it up as an extended desktop and drag the white menu bar to the Thunderbolt display so it displays my desktop but if I then disconnect my MacBook Air, the menu bar is absent and all the windows that were seen on that display are absent, as if it I was still attached to the larger display. The only way around this is to go to Thunderbolt display preferences, drag the white menu bar back to the smaller display and manually drag all windows to the smaller display before disconnecting. Doing this multiple times per day is a real pain. Is there a way to set my MacBook Air to recognize when it is attached to the Thunderbolt display and automatically my desktop and all open windows to it and then do the same process in reverse when I unhook it?

It's definitely not supposed to work like that...when you plug the display in, it should just turn on and adjust your displays. It works like that on my MBP. Kind of a silly question, but do you have the MagSafe from the display plugged in your MBAir too? Thats a requirement. Beyond that, it should "just work."
Not sure if there is some setting to enable...i haven't seen it. Call to support?

Can I automatically synchronize Outlook (Windows XP) via Bluetooth?

Similar Messages

Maybe you are looking for