Can I batch assign a location?

Can I batch assign a location? My scenario is that I have all my images for this year in only one folder and many of them are taken in the same location and I would like to assign that location to the batch, which I select by clicking on the relevant images.  Thanks for any help.

Select the folder and switch to browser view then in the upper right hand corner of the screen select the places icon
This will open places with all the images in the folder in the filmstrip. Select them all and drag them to the proper place on the map.

Similar Messages

  • Batch assign

    Dear Expert,
    We create manual production order in co01
    assign store location and batch of raw material in component overview in co01.
    then mb1a
    confirm co11n
    then receipt mb31
    here we enter store location to where we want to receive Material & batch manually
    Can this batch assign automatically in relation with particular material if yes let me know.
    Thanks & Regards
    Pert

    Dear,
    You need to maintain following setting for automatic batch creation at the time of order creation :
    Go to OPKP ( Production Scheduling Profile)----> Enter Plant & Profile -
    >Batch Management
    Maintain 1 Automatic batch creation at order creation and save the profile.
    Assign this profile in Work scheduling view in material master MM02 here you can assign the production storage location in work schdeduling view.
    batch assign automatically in production order in relation with particular material and receriving storage loaction will also take automatacilly.
    Regards,
    R.Brahmankar

  • Is there any function for the Batch assignment of production order

    There is one function in the CO02(Production Order) which named "BATCH ASSIGNMENT".
    CO02 -> Components -> Batch assignment
    But the function only can assign one material one time.
    This is very boring.
    So we are planning to create a new program for it.
    But I can't find any function moudle or BAPI can be used.
    Could anybody give me some function moudle or BAPI for it?
    Tks

    Hello~~~Is there any body here?

  • How can get batch number in process order?(T-code: COR1, COR2)

    Please tell me step by step process it will be better to me the solve my issue.
    When End-user uses alread existed batch number,
    Pop-up Message,
    "Your batch number is already exist.
    Are you creating new batch number?"
    If the answer is "No",
    System still uses that batch number.
    And User-Exits, or bodies don't exist this time.
    How can I get this batch number When saving in process order?
    I uses User-Exits "SAPLV1ZE" in Batch Number Check,
    "PPCO0007" and "PPCO0001" in saving process order.
    I know "PPCO0001" has all information about process order,
    but I can't get batch number to "PPCO0007" From "PPCO0001" by using Memory ID.
    Cause PPCO0007 happens before PPCO0001.
    (ref. PPCO0007 can stop saving in process order.)
    I want to know how can I get batch number when pop-up message's answer is "No".
    I have to send this batch number  to PPCO0007 by using Memory ID.
    Please, help me.
    Edited by: Jamie White 99 on Mar 15, 2010 11:00 AM

    Dear,
    Could you please clear your requirement in brief?
    You don't want to use the existing batch number or want to assign external batch number or want unique batch number?
    Use SAPLV1ZE and EXIT_SAPLV01Z_003 where you can replace the proposed number range with external interval defined by yourself.Also using EXIT_SAPLV01Z_004 you can define your own checking rule.
    Further information can be obtained from the documentation on the enhancements
    Also refer this link,
    http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
    Re: External batch assignment( Manual)
    Regards,
    R.Brahmankar

  • How can I adjust my gps location?

    How can I adjust my gps location?  When I ask Siri to remind me of something when I get home, it would not work  I learned by accident while taking a walk that I have to go past my driveway to the far edge of my property for location services to recognize it as my home.  Can I make an adjustment to my gps?

    When you say "It always reverts to the same place" what do you mean by it?
    It sounds like you are using an address.  If you put an address into a map program, the map program will find the address based on where the address is mapped onto the map program, which you can not adjust, and which is often somewhere around the end of a driveway or even a mailbox. 
    If you had a large piece of property, or if you are looking on a map program for, say, a college campus, by simply inputting the address, there has to be a single point that is assigned to that address, which is why an entrance, driveway or mailbox is often what you get as the result. 
    This is not related to GPS in any way.
    Even if you create a location yourself, via dropping a pin, for example, you are just dropping a point onto a map - once again not related to GPS.
    GPS does nothing but show you approximately where your device is currently located.

  • Can Photoshop Batch Resize Tiff Files?

    I have quite a number of tiff files that I want to resize in terms of page dimensions and retain the same resolution / dpi. Can Photoshop batch resize tiff files?

    Yes Photoshop ships with a plugin Fit image you can record an action to re-size an image to fit within some number of pixels.  Image resolution setting and aspect ratio are not changed however the number on pixels the image will have will be less then or equal to the pixels size set.    For example if you set width and height to 2000px the largest size image you could have after the operation would be 1:1 aspect ratio square 4MP 2000x2000.  If your image has a landscape aspect ratio the re-sized image will be 2000px wide by less then 2000px high and if Portrait the re-sized is will be 2000px high be less then 2000px wide.  Bicubic Interpolation for the re-size.
    Once you record the single step action.  You can batch the action.  You can have batch open the image files and save over the original files or have batch save the resized files in a different location. Fit Image and Batch are both found in menu File>Automate>

  • Production Order Component Batch Assignment Enhancement Needed

    Dear Experts,
    In a Production Order CO01/CO02 under Components you could assign Batches to a Component/Material. To do this in the Production Order screen click Component Overview button and then select a Component/Material and click Batch Assignment Button. You would be now in u2018Maintain Batch Fixed Reservationsu2019 screen. Here you find right below the u2018Batchesu2019 screen. Where Batches to be assigned to Component are found, I need to add a Column to this Screen and populate at the time when Batch Assignment Button is clicked. I went through all enhancements of Production Order and could not locate any. Please let me know if you find one that could modify the u2018Batchesu2019 screen.
    If you are unable to find one to help youu2019ll further there is an Application Toolbar button called u2018Customer exitu2019 in u2018Maintain Batch Fixed Reservationsu2019 screen and I am unable to locate the Enhancement for this Button.
    Thanks,
    Sri

    Had to close because of Rules

  • Batch Assign missing Profile - Adobe RGB

    Is there a way to batch assign the missing profile?
    Each time some images are opened we have to assign the missing profile manually - and save manually even tho' image has been worked on in Adobe RGB. Makes working with 100's of images very very slow! On MAC OS X Version 10.3.9. Look forward to some advice.

    Open the Actions-palette, click on the notepad-symbol at the bottom next to the wastepaper-basket-symbol (thus creating a new Action), name it, and perform the tasks You want to record (in this case Assign Profile); as long as the Record-button is red any further recordable acts will be recorded, so hit the Stop-button (the one with the square) when Youre done.
    To record this Action You will of course have to have one file open, but afterwards You can apply this to a number of files by going, in the File-menu, to Automate  Batch and select Your Action, a source-folder and a Target-folder etc.

  • Certificates using serial numbers with material without batch assigned

    Hi experts...how can i track serial numbers and inspection lots from roh material without batch assign but with serial numbers ? these roh materials were used in PO without batch assign to FERT material yet. Is possible use where-used list only to manage serial number or only using batch administration over the serial numbers ?
    i will apreciatte any answer!
    Regards
    Marco Antonio Trois Endres

    Hi ,
    This seems to be a Material Management configuration question, I dont know if this will answer it
    You will have to configure the Characteristics of your Material from a task list and transfer/Copy it to your Certificate profile,
    there has to be a feature to enter the desired selection Criteria based on your question
    Work with the security team if  your MM_G and MM_S class objects can help open or close certain authroization objects to achieve your goal.
    in one of the google search it states that
    "This can be done from  Extras Characteristics from  your task list.
    A dialog box appears for entering the selection criteria for the task list"
    Will Need more security related information to help you on this.

  • Batch assignment Mnadatory for production order

    Hi Friends,
    How can we restrict the  release of the production order if Batch not assigned in the Header (Goods receipt Tab).
    By using the status profile seems one possibility, can you tell the procedure or details how to acheive this.
    Apart from this is there  any other  option.
    Thanks,
    Ramnivas

    Hi, thanks a lot
    Actually i have  already used the  user exit for the  same but  was looking if  there could be  any standard functionality to restrict release without  batch assignment to order.
    Anyways i would like a help related to the same, i have considered an internal batch number for these orders which gets automatically generated  during order  creation using the same  exit. The issue is as soon as the batch number is created and  assigned to the order. System does not allow  me to change anything in the order.
    e.g. the  Basic  dates, Over/Under delivery tolerance, order quantity.
    What  could be the  reason and the  solution for this, as the order is  still in created state and not yet processed.
    Thanks/.Ramnivas

  • Combine batches at vendor location (O stock)

    SCN Members,
    We have a requirement, where batches at vendor location ('O' stock) needs to be combined. Based on
    our investigation we could not find a movement type to combine batches at vendor location. 
    How to combine batches at vendor location ? Any inputs on given end, is much appreciated.
    Material
    Stock at Vendor loc. (O stock)
    Batch #
    Requirement
    Rubber
    5000 kg
    ABC123
    Move 2000 kg under batch XYZ789 to ABC123, resulting in moving total stock (7K) under batch ABC123
    2000 kg
    XYZ789

    Why 309 is not possible? We can use 309 O movement type to transfer the stock from one batch to another batch. In that case material and receiving material will be same.
    Here is the screen shot
    You just have to change the receiving batch..

  • Assigning oracle location to control center

    Is there any OMB statement which will assign oracle location to control center in 11G?
    I know it can be manually done.Please proivde me the OMB statement so that the data location appears in the right hand side edit control center tab.
    Thanks in advance.

    change the $values
    OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES \
    (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, \
    SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE', \
    '$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME',\
    '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', \
    '$DATA_LOCATION_USER','$DATA_LOCATION_PASS')

  • Bapi for Assign a Location Product - Model in SCM 4.1.

    Hi,
    I need a BAPI / FM to Assign a Location Product - Model in SCM 4.1. Can any body give me the info regarding this.
    Thanks in advance for your help.
    Saisdhar

    Hi,
    please have a look at note 865361. Please use Userexit CIFPPM01.
    In the note you'll find a sample coding for the locations.
    regards
    Joerg

  • Batch Assignment required

    Dear All,
    My senerio is this : -
    (1) I am creating delivery with batch split ...
    (2) Sometimes inspection lot created with batch assignment & I am able to record the result & UD but some times system made inspection lot with full delivery qty and when I am tried to record the result system given an error for "batch assignment required" . I am not able to understand why some system do other procedure & some time do other...
    Can anyone help me out...

    Is this an outgoing delivery, inspection type 10?  If so, the inspection lot is created when the delivery is created.  So the lot will be sitting out there with the status BREQ, batch required.  You must be using a batch managed material.
    Untill a delivery is fully picked, the batch number is not assigned to the inspection lot.  I believe this is the difference you are seeing.  In some cases, SD might  assign the batches either directly in the sales order, (which transfers to the delivery), or they assign them in delivery before the lab does the testing.  You might also have automatic batch selection which might pick the batches in some cases, but in other cases no batches are found and it requires a manual intervention to select batches.
    In other cases, if shipping hasn't yet completed the SAP transactions to assign the batches to the delivery before the lab completes testing, you'll get the error you are seeing.  In some busineses they test the batches before making the assignment so they don't have to unpick the delivery if a particular batch fails testing.  Doing that, means the lab has to wait to record the results until later, after SD finishes picking the delivery.
    FF

  • Automatic batch assignment on UD

    Hi,
    Can anyone tell me how can i configure my system so that it assigns automatic batch assignment while doing Usage decision in transaction qa32 on one specific plant.

    Hi there....
                  The txn QA32 is for selection of inspection lot.... the UD for the insp. lot can be done with the txn QA11.
    If the material is produced by in-house production then the batch assignment setting will have to  be done in SPRO and in the material master MRP-2, work scheduling view.
    Please reward if you find the answer helpful....let me know if you have any further query.....
    Thanks

Maybe you are looking for