Can I batch stabilize video in compressor?

Hi there.
I've got about (30) 10 second clips that I need to put some sort of stabalization on. I know how to do this in fcp but I'd have to group all movies in one timeline to do it all at once. Is there a way to do it in compressor (or another program) where I can just make settings for one and batch change them all?
Thanks in advance,
Caleb

No. Compressor does not do stabilization.
You need FCP, Motion or AfterEffects.
If you use AE, you can send it to a render farm to do the computations.
x

Similar Messages

  • How to resize the video in Compressor?

    Hi all, my first post here,
    I just know  we can't optionaly resize the video in Final Cut Pro and
    using the compressor can resovle this problem,
    It's not very convenient to resize the video in FCP.
    i wanna ask how can i  resize the video in compressor
    Thanks a lot

    First, you should carefully think why you'd need to resize. You can export from FCP X to the standard sizes, both HD and SD. Do you really need some nonstandard size?
    Keep in mind that usually you'll get the best quality if you edit in the desired final size, rather than resizing afterwards.
    If you do need to create a video in some nonstandard size, like, say 1080x1920 (i.e. in "portrait" form), there is a way to do it:
    http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial
    With Compressor you have many pre-made defaults for different kinds of devices. Also, you can export to Quicktime and tweak the settings to get a desired size.
    1-Drag one of the existing settings (in the example below, I used SD 480p)
    2-Select it
    3-In the Inspector, select the "Geometry" tab
    4-Choose "Custom" and enter the desired size.
    5-Change the other properties (such as codec, under the "Encoder" tab), as needed
    5-Choose "Save As..." and save it (give a suggestive name, say "Portrait") so that you can later reuse it as needed.

  • Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.

    Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.
    Can someone help me?
    Thank you!

    Got the phone direct from the Apple website, so I assume it was unlocked, and it had been on giffgaff ever since but I don't see why that's a problem?
    The carrier was automatically selected as Free and is up to date.
    There seemed to be no problem that the SIM was being used in an iPhone 4 and my friends in exactly the same situation (e.g. arriving in France and moving over to the Free network with iPhone 4's) have had zero problems with their 3G network; it just seems to be me.
    The Free Mobile Network is included on this list which I guess means that they are Apple-approved? iPhone: Wireless carrier support and features
    How do I find out whether or not I would need to manually configure an APN? I'm not even sure I know what that is.

  • Can I batch process? I need identical effect processing of multiple video files

    I have just joined Creative Cloud, so these are very basic questions.....sorry.
    I shoot videos of live bands using two cameras, so I usually end up with around 25 separate songs per show and 50 separate files (2 cams, two files per song). All the files are: 1920x1080 resolution, 23.976p frame rate, Pro Res 422 codec.
    I currently edit in FCPX and color correct in DaVinci Resolve.
    Because of low light conditions, I often need to use the effect Neat Video to remove noise. However, FCPX doesn't like Neat Video: freezes up, will restart rendering sometimes, etc.
    So, I need a way to take the color-corrected files from Resolve and process with Neat Video, then import them into FCPX for multi-cam editing. (If Premiere Pro handles Neat Video well, then I may switch from FCPX  to Premiere Pro and do it all there.........but I need time to learn Premiere Pro).
    So I decided to try After Effects for this. I just tested some files in AE and the Neat Video processing went well.
    However, I need to batch process the files if possible. Currently for each file I am:
    (1) Setting up a Composition
    (2) Adding the Neat Video effect to the file
    (3) Using the Neat Video window to adjust settings
    (4) Setting the render settings
    With my approach I will have to set up 50 separate Compositions.
    Questions:
    (1) Can I batch process all 50 files, with one set of settings? (I tried using multiple files in one composition, but AE only rendered out the top file).
    (2) Can I tell AE that I want the render settings to be the same as the imported files (resolution, frame rate, etc.), rather than having to enter the render settings each time? I just want the rendered files to be identical to the original files, except for Neat Video processing.
    Thanks for your help.

    I don't think Mylenium understood you. You need to not only bring each of 50 clips into it's own Comp but then you need to apply an effect (Neat Video) to each one before going out to the Render Queue... right?
    Here's what I would do. Import all 50 clips into your project. Select all of them and drag to Comp button (on the bottom of the Project panel) or right click - "New Comp from Selection". In the dialog that pops up selct "Single Composition", use dimensions from the clip of your choosing, select "Add to Render Queue" and select "Sequence Layers". Open the Comp and select all the layers (they may already be selected), apply the default Neat Video Effect to all of them (or apply it to one, tweak it, select all the other layers and copy/paste it).
    Now download this script...
    http://www.redefinery.com/ae/view.php?item=rd_RenderLayers
    In After Effects go to File/Scripts/Run Script File and choose the rd_RenderLayers script. Make sure you are happy with the Render Module settings and the file naming and off you go.
    You'll have all 50 clips in 1 Comp, with one place to copy effects and then each layer gets output back to an individual file.

  • I updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

    i updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

    You need to update the software. This is a very old version that will not work with the current OS. Did you purchase the software from the App Store? If do sign in with the Apple ID used to buy it. Go to the Purchases page and find the software.

  • Cropping 16:9 video in Compressor for output in 3GPP format

    Hi all,
    We need to regularly batch convert video for a client, from a 16:9 original to 3GPP's 176x144 ratio by cropping and resizing in Compressor. However, when setting up the encoding settings for 3GPP output, the Geometry fields are greyed out, meaning I can't crop the edges from the original.
    The current workaround is to output the file first as an M-Peg (cropping it at this stage), and then re-encode that file in the 4 different 3GPP versions we need.
    The question is, is there a better way to do this? Can I force the crop to take place at the same time as it's encoded to 3GPP, or, if we're stuck with a 2-stage encoding process, can I make Compressor automatically begin the re-encoding of the M-Peg file to 3GPP, as soon as the initial transcoding is complete (AppleScript, Automator?)
    Thanks

    So, if I drop in my source, add an MPEG-2 preset (120 minute video) and then modify the aspect ratio drop down to 16:9, is there anything else I need to do to get the same result as the 16:9 preset in Compressor 2?
    There shouldn't be anything else you need to do.
    By the way, it should automatically detect aspect ratio (via the anamorphic flag in DV/SD QT files) but I suppose setting it manually couldn't hurt.

  • Can I batch upload to youtube + manage?

    I'm a little confused about what Compressor does that FCPX doesnt
    I've read the intro in the manual about what Compressor is - I dont understand what it does that FCPX doesnt do
    I'm sure this is a dumb question
    One thing I do need is to be able to batch upload videos to youtube
    This is an amazing amount of pain to do on FCPX
    It creates a queue. It gives you no clue what the items are in the queue
    Only the file being processed, you are given the name (partially - shows first few characters)
    WIll Compressor help me with uploading to youtube?
    Thanks
    Omar

    Yes, you can send from Compressor to YouTube as a batch. (works here)
    Load your videos into the batch window:
    After setting up your compression for each video. Click on the video image in the batch window:
    Click on the Inspector window... tab... Job Action... Pick publish to YouTube.
    If you fill this out wrong you will get a warning error. Do this for each video.
    Open Shared Monitor, not only can you see the encoding process, you can see the up-loading progress for each video to YouTube:
    The above two video took about 15 seconds to upload to Youtube.

  • Can not see some videos, Can not install Activex 9.o47

    My name is Alex, I have been working on getting flash to play
    for about 3 weeks.
    I have uninstalled both shockwave and flash many many times
    using all different sites. I have turned off my firewall,
    anti spy, and antivirus when downloading. I have shut
    everything down that was running. I have closed everything.
    I have restarted each time between downloads. I have then
    downloaded the install from many many sites. Closed everything, and
    installed.
    I have uninstalled from ADD/Remove. I have reinstalled. Now,
    when I go to ADD/Remove programs it shows that both Flash and
    Shockwave are there.
    Seriously, I have downloaded and uninstalled and installed so
    many times from so many sites.
    Each time the screen shows I have done it successfully. But I
    cannot get it to play. I have turned off all popup blockers that I
    know of.
    I still run my anti virus, firewall spyware etc. But says
    there is nothing to prevent Flash from playing some of the pages I
    use to see.
    I have done a Reg clean. And I have installed after all that
    and still does not work.
    I am the admin on the computer and I am the only one who runs
    it. I use firefox for my browser but I tried to get it in IE and
    still nothing.
    Everything was going absolutely fine till I done the stupid
    mistake of updating my Flash player,
    seen then my computer is going banana, I don't understand why
    is that,
    I can actually see U tube videos, but I can not see other
    videos like trailers from IMDB, <Your browser is blocking
    display of our video player. If you would like to see the video,
    please turn off any ad-blocking or Flash-blocking software that you
    are using>.
    That's what he said on the screen where the video suppose to
    play, I can only see advertising, It should be the other way
    around,
    and even the news on yahoo I can not see them, only ads.
    I had no problems before, no pop up I could see the videos
    absolutely fine and especially no ADS and then that days,
    I wish I could cancel that day, I'm try to fix this problems
    all ready 3 weeks and nothing, I did try everything but nothing.
    I have download flash Player 9.0.47.0 manage to install but
    found impossible to install Activex 9.0.47.0 seems to be impossible
    I do know why. disinstall everything reinstall but nothing,
    # Select Start.
    # Select Run.
    # Type cmd
    # In the command window, type the following:
    uninstall_flash_player.exe /clean
    The answer is: uninstall_flash_player.exe is not recognised
    as an internal or external command,
    operable program or batch file.
    does not work, try million of time, does not work.
    Does anybody know why?

    You are not the first one to notice..................
    http://forums.adobe.com/thread/748720?tstart=0
    Please do submit a request for it to be changed   www.adobe.com/go/wish

  • Batched Some Videos To m2v... Where are they?

    Ok, this is a strange one for me.  Well, I guess so or I wouldn't be posting. 
    So I batched about 85 videos using Compressor 3.5.3 in four different batches and sent them to four different folders on the same external drive.  They all report "Successful" in Compressor AND the folders that I sent them to show file sizes indicitive that the files made it but they DO NOT show up in the folders.  The folders seem empty.
    Any idea what's happened here?  Huge waste of a ton of time.
    Thanks all!

    I did that.  What's REALLY frustrating is that in Compressor showing that they completed successfully it has the little magnifying glass to point you to them in the finder.  When I click it it sends me to the right folder but still nothing there.
    I've even switched the drive they are on to another system and the same issues are present.

  • I'm getting Video rendering error: -50 and can't load my videos to youtube, or in a file.

    I can't share any video anywhere and am getting this error message:
    Video rendering error: -50
    Any help?
    I'm using iMovie.

    Have you tried to export Master File and use Compressor to encode. There are presets there ?

  • Have leopard but still get Cannot Submit Batche error message in Compressor

    i get the "cannot submit batch unable to connect to background process" error message. Some posts attribute this to a Tiger anomaly but it has happened to me after i went to 10.4.10--though i had not used my DVDSP2 in several months.
    Any suggestions appreciated

    Sounds like your compressor preferences are trashed. You can try getting your old compressor preferences before you installed leopard.
    leopard keeps some of the old file from you previous system.
    I forget what the name of the folder is but its something like previous versions in your main directory. From the previous system folder navigate to your old
    compressor settings. users>yourname>library>application support>compressor.
    copy those files from you previous system folder and move them the new compressor files location that can be found under you username NOT IN THE PREVIOUS SYSTEM FOLDER.
    You can also try moving your present compressor settings to the trash (DO NOT EMPTY)and rebooting then launching compressor. You might get prompted to reinstall compressor from disk or website file.
    There also used to be a way to download just compressor from apples website.
    If all that doesn't work. DO A CLEAN INSTALL final cut likes that better then upgrades.
    Back up and do a clean build.
    Back up old content to other HD then OS is on.
    Reformat OS HD
    Reinstall OS
    Reinstall FCP (long time).
    FCP will be happier that way.
    HOPE IT HELPS.

  • How can i export uncompressed video from motion 5?

    how can i export uncompressed video-material from motion 5?

    Export with Current Settings if you are already working uncompressed. Otherwise, Send to Compressor, and choose the codec you want there.

  • I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

    I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Can't play the video in my Lumia 520

    Hi
    I always love the work of nokia and this time trailer app is just Nice but there's a problem.
    I have downloaded 6 trailers and only 1 is able to play.
    Rest of them says "sorry we can't play this video on your phone".
    I have no idea what's wrong with my phone.
    Please help.
    I have a Lumia 520.
    Thanks in advance.

    Hi @livinglife,
    Welcome to Nokia Support Discussions! 
    What is the error message displayed when you try playing the video? Have you tried using mobile data? If yes, does it show the same issue? What fixes have you tried so far? By the way, are you using the same phone model? 

  • How can I transfer a video recording from iPad Mini to PC?

    Hello Good People,
    I've got an iPad Mini running ios 7.1.2.
    I've got a Windows laptop running Windows 7 with iTunes 11.3.1.2.
    I recorded a video of an interview with my elderly mother which I want to transfer to my laptop for editing and saving for the family.
    I'd like to use Sync but Sync scares me every time I look at it that it will start erasing things from one place or another.  Looks like the unstated assumption is "Sync" from PC to iDevice, not the direction I want to go.
    So, I've done the google searching and haven't found anyone answering this issue but I've found dozens of adds from third party software I can buy to do what apple should provide for as a foundational, basic capability which leads me to think that they have purposefully not given people this capability for some reason.  The iPad Mini also doesn't appear in Windows Explorer so I can't find the videos myself.
    Anyone have a blessedly simple way I'm just not seeing?  Is it safe to use Sync and not lose this precious video forever after it flashes its warning of erasing things?
    Thank you!
    Jim

    Okay, I figured out that Windows has "AutoPlay" settings which can automatically download photos and videos from a newly connected device, such as an iPad Mini.  I think I could open it in Windows Explorer too that way but the auto download solved my problem.

Maybe you are looking for