Can I blend 2 completed projects into one?

How can I tie a completed project onto the tail end of another completed project for export to you tube an easy way?
I know the youtube export function; it's the idea of publishing back to back in one vid.

I haven't tried this myself within iDvd alone since iDvd is not really a utility whereas Toast is. Not sure if iDvd alone allows for such a feature. My guess is that it does not.
However, here's what is possible provided one also uses Toast 9 or 10. Simply use the merge feature within Roxio Toast 9 or 10 for two separate Video_TS folders (found within your iDvd) onto a single dvd. Here's how:
Making a VIDEO_TS Compilation
You can create a DVD by compiling multiple DVD-Video VIDEO_TS
folders onto one disc and play it on a set-top DVD player or in a Macintosh
or Windows computer with a DVD player.
Some VIDEO_TS folders may be too large to fit on a standard recordable
4.7 GB DVD. Toast can compress this video to fit on a standard DVD, or if
your recorder supports dual-layer recordable DVDs, you can create a duallayer
DVD-Video from this folder.
This is the best choice if you have multiple VIDEO_TS folders that you
want to compress on one DVD-Video disc.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Similar Messages

I Movie 09 can I combine projects into one project?

Can I combine 3 seperate IMovie projects into one so I can burn a short film to DVD?
I had three different people shoot 3 different sections of a short for me, now I want to put them in one project together in order and burn a DVD.

you can copy (copy all) the clips from one project and paste them into another clip, but music and titles will not come with that. If you export one project as a .mov file and then reimport it into iMovie as suggested, that will easily work, but you wont be able to edit that movie's music or titles.
rr

Pls advise current info as to combining 3 iMovie projects into one iMovie. Thanks!

Pls advise current info as to combining 3 imovie projects into one imovie. I will finish with idvd.
I am in a rush today to complete a video for my brother's memorial for tomorrow. Thanks!

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

How do you import multiple iMovie projects into one iDVD project?

Hi.
I'm 17, and am trying to create a DVD of when the family went on a cruise. For different places/days, I've created different iMovie projects.
But, when I want to export to iDVD, it only lets me put one iMovie project into one iDVD project?
I've tried dragging the actual iMovie project files into iDVD but that doesn't work.
I know I could export to QuickTime and then drag it into iDVD, but it seems exporting just to iDVD is much quicker, and the quality is better.
Anyone know how I can do this?
cheers
+P.S. If it helps, it's iMovie '11 with iDVD '09.+

That is not true. You can use them all in one DVD. I have just created my first DVD which has a trailer, a movie with chapters and several different slide shows.
All you have to do is save each project to Media Browser. (Choose Share in toolbar). Open iDVD and choose your theme or no theme. On the right will be all your options such as audio, media photo's etc. Choose your various video's/projects etc and just drag and drop which ones you want to the page and they will automatically put themselves there with the given name of each video/project.

Combine two iMovie projects into one iDVD project?

Could someone help me figure out the best way to combine two iMovie (HD 5) projects into one iDVD project? I currently have a documentary with one iMovie project at 1 hour exactly. I am starting a second one and would like all this to go on one DVD eventually. I am especially concerned about what happens with the chapter markers already created in each iMovie project - how is that combined when the two are put together? If there is a link for this info, I'd be happy to read that as well.
Thank you!

I would combine them by saving each completed imovie (without chapter markers) as a full quality QuickTime movie.
Then start a completely new imovie project and import each of those in to make make one large imovie. (But remember, your DVD will only hold about 120 minutes of footage and that doesn't count the themes).
That's when I would add the chapter markers.
BTW-it's going to take up a lot of disk space to save the movie s and to burn the DVD.
Sue

Combining multiple projects into one?

from a recent vacation i have imovie projects for each city, 6 in all, each being between 2:45 and 5 minutes long. i did each in its own project to keep clips organized better, but when the final project plays, i want the cities to run one after the other, without kicking out to the menu everytime. basically what im asking is is there a way to merge these seperate projects into one, or do i have to compress each and then make a totally new imovie from that?

welcome phiphika to the  board…
in terms of convenience, I would indeed export/share all 6 movies.
to tape, or as Quicktime/FullQuality…
both methods create a lossless copy of your final movie(s).
in step II, import all 6 project into a new iM project, as said above, you don't loose ay quality with that back'n forth copying... only some time ;-)… you can set then chapter markers etc....
besides, your workflow is as mine on larger projects: not 678 clips into one monstrous project of some dozends Gigabytes, just segments…

Combining several iMovie projects into one, time-not space-being the factor

Hello,
Space is not an issue (large external drive), but I'm trying to figure out the fastest way to combine several iMovie projects into one (so each movie will become a chapter in iDVD). I'm pretty sure there must be a better way than I'm attempting, selecting all the clips in clipviewer, then dragging and dropping to the new project clipviewer. As I've done this, the "time remaining" window keeps growing (started out about 4 minutes, climbed to "92 minutes remaining," then I aborted the move). Details: each movie is about 8-10 minutes long, widescreen, made up of various (sometimes many) dv clips, audio segments, still photos, etc.
I have added dv clips to a project via the media folder (project unopened), but this was a single item and simple to move from trash into the project. In this case, I'm not sure what to move in order to save the entire project intact.
Thanks so much for any help,
b
Message was edited by: Bimp

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.

In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN

Have multiple accounts, how can I move all products into one account?

have multiple accounts, how can I move all products into one account?

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.

This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141

Aperture 3 why can't i drag projects into folder

Hi. Im using aperture 3.4.3 and I can't i drag projects into folder. Why is this? Help!

Projects can only go into folders that are not under other projects. So for example
Library
     folder
          project
is OK
but
Library
     project
          folder
               project
Is not OK (the last project won;t go)
So if you create a folder at the top level can you drag a project into it?

Can i import Jdeveloper project into Eclipse 4.7 juno????please help me.

can i import Jdeveloper project into Eclipse 4.7 juno????please help me.
when i tried this it is giving some errors in project ie mismatching in configurations....!so i want soln please .

Hi,
first recommendation is to not use Eclipse natively but use OEPE that ships with Eclispse Juno. This way you have the IDE prepared for ADF projects. However, still the JDeveloper workspace structure does not fit the Eclipse structure.
Frank

How can I merge 2 tracks into one track with iTunes 11? I used to do it with iTunes/Advanced/Join Tracks, but iTunes 11 does not have an "Advanced" button.

How can I merge 2 tracks into one track with iTunes 11?

Thanks for your reply, Jim. I imported a CD that I had burned previously with the 2 tracks of sound effects that I had downloaded from the internet (MP3 files), but I did not see an option to join the tracks when I imported the CD. In the upper right corner there were three buttons: Options, CD Info, and Import CD. When I click on Options, the drop-down menu has two choices: "Get Track Names" and "Submit CD Track Names". I cannot find an option to Join Tracks. Help!

Can 2 people plug earphones into one iPad to watch a movie at the same time?

can 2 people plug earphones into one iPad to watch a movie at the same time?

If you purchase a splitter per the suggestions from the others, be sure that the earphones have their own volume control. Some, including the absolutely excellent Bose Quiet Comfort "15," rely on the iPad for volume control.
Also be prepared for the possibility that neither listener will be able to get the sound as loud as he/she wishes.

How can we combine our xCode projects into one?

My classmates and I had to make an app as a group assignment in xCode. We were told that we could make them seperatley and combine them later on, but with time ticking on and a otherwise-located tutor we are stuck. None of us are used to using XCode - we understand just the very basics. We have all created our individual projects in single-view application templates and wish to combine them into one tabbed app (the kind of app like facebook or twitter that has a dock or navigation bar at the bottom). Some of our individual projects have more than one ViewController which are linked together; I do hope this doesn't make things even more complicated. I have read something mentioning sub-projects in a new tabbed application but as a whole, we are unsure how to do this, or even if it is the right way to solve the problem. Can anybody help us please?
I realise I've put this in the wrong community but there's no Xcode community and I felt this was my best bet. As i said we are not experts with Xcode and a dummed down explanation would be really appriciated. Thanks in advance!

Sorry, but that really isn't going to work. I suggest you create a GitHub account for the project. Start a new project that has the basic structure you want and placeholders for the content. Then, everyone can check out the project and port their single-view app into the final version, replacing a placeholder. Everyone can work independently for a while. But when it comes time to synchronize the changes, everyone should probably be in the same room to collaborate. Do that part one subproject at a time.

Can I blend 2 completed projects into one?

Similar Messages

Maybe you are looking for