Can I block sites using keywords using airport Utility?

I have upgraded to an Airport Extreme from an old Netgear router. The AE is better than my old router is almost every respect (one of the main reasons for changing is that I can control use to a device by time).  One surprising feature that seems to be missing is blocking web sites either by domain or keywords.  Is this possible using the Airport Utility, I can't seem to find anything?
Thanks.

One surprising feature that seems to be missing is blocking web sites either by domain or keywords.
Sorry, the AirPort routers do not have this type of feature.

Similar Messages

  • Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

    I have an iPad 1 and have a profile set up with Lotus Notes for work email.  As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work)  so I can visit blocked sites.  When I install the VPN it want to change the profile.  Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
    max

    Yes, you can have more than one profile installed.

  • HT4260 Ho to configure the "Roaming Network" using the current AirPort Utility

    Hi, I have a question about this roaming network. With the current AirPort Utility I do not know how to select "share a public IP" on "connection Sharing" on the first AirPort. Maybe someone can tell me how to configure this. It would be great if Apple would update this...
    Maybe this is important: I use a Time Capsule as my first base station. The second one is a AirPort Extreme and the third one an Airport Express.
    If I just set the first device to "Bridge Mode" I loose the internet connection with my cabel modem. I get the message "No Internet Conection". If I hook up my mac to the cable modem via ethernet the internet ist still functioning.
    The funny thing is that I can use the internet for a couple of minutes until it does not work anymore. Everytime I change something the the settings of the Time Capsule (Bridge Mode to DHCT & NAT) I can use the internet for a couple of minutes...??
    Thank you!

    Using AirPort Utility 5.6:
    Connection Sharing: "Share a public IP address":
    Connection Sharing: "Off (Bridge Mode)":

  • Has anyone used TC's AirPort Utility to config AEBS (802.11n) ?

    I'm curious to know if anyone has used the AirPort Utility tant comes bundled with TC to configure an AEBS 802.11n (GbE).
    If they have, can they say if Time Machine sees a USB2 AirDisk attached to the AEBS 802.11n (GbE) ?
    Thanks....

    I'm curious to know if anyone has used the AirPort Utility tant comes bundled with TC to configure an AEBS 802.11n (GbE).
    If they have, can they say if Time Machine sees a USB2 AirDisk attached to the AEBS 802.11n (GbE) ?
    Thanks....

  • How to setup a static ip address and DNS on airport extreme using the iOS Airport Utility?

    I am at a location that only has wired ethernet.  The ethernet connection has a specific  Static IP address, subnet, gateway, and DNS setting.  I cannot seem to find how to enter DNS settings using the Apple Utility on an iPad. HELP!!!

    First, I am assuming that you are trying to administer your AirPort base station for a static IP address using the iOS version of the AirPort Utility ... correct?
    If so, then to do so:
    Start the AirPort Utility app on the iPad
    Select your base station.
    Select Edit
    Select Internet Connection
    Select Static
    Enter the appropriate IP address information
    Select Done
    Sorry, it does not appear that direct input for DNS IP addresses is an available option with this version of the iOS AirPort Utility app. Not sure why this was not included.

  • Can I update my airport express station so I can connect to it with the newest airport utility?

    the airport express worked with my old computer which had snow leopard. I just recently upgraded and got a new MacBook with mavericks and it won't let me connect to the airport. Any solutions to this problem without buying a new airport?

    Unfortunately, updating the older Express that you have would require that you literally change all of the hardware on the device. Even if the parts were available....Apple does not offer them......it would likely cost more to "update" your old Express than buy a new Express.
    You can use....or borrow for a few minutes....another Mac running Leopard or Snow Leopard, or a PC with AirPort Utility installed on the device to administer the older AirPort.

  • Can not see my time capsule in airport utility

    I was trying to add a password so my time capsule could access ATT for internet and during the process it disappeared from the airport utility on my MAC?
    I've tried resetting both devices, but it won't come back to the utility so I can configure it.  Rescanned several times.

    Remove any other connection to the TC except one computer by ethernet. Press the reset again, and hold it for 10sec and wait for the TC to restart.
    Restart the airport utility. If it fails to find the TC try plugging it into a different computer.
    If the issue follows the TC take it to Apple Genius to be checked.

  • Can't open the configuration window in Airport Utility

    The Airport Utility was able to recognized my AEBS, but failed to read the setting of my AEBS and therefore can't successfully opened the configuration window; just asked me to check if my computer was within range ???????
    Logging into the config panel is just like playing lottery, that's ridiculous !

    Yep, similar problem here. Everything works great until I launch Airport Utility and try to access the setting of my TimeCapsule. It sees the unit, but hangs when downloading the configuration. Once it starts spinning trying to download the configuration I lose my Internet access. Odd thing is the problem only appears on my iMac. My MacBook Pro doesn't have a problem.
    I got it to work once by deleting the login key from my keychain (thinking it was an authorization problem). After I deleted the key it asked me for the password when I fired up Airport Utility, and then worked fine. However, the problem is back and my trick doesn't seem to be working this time.
    I'm still thinking it is an error associated passing credentials for managing the AEBS/TC.

  • Can not find USB Hard Drive with Airport Utility Programme

    I am quite new to MAC and I am having difficulty making my Iomega External HD seen by the Airport Extreme Base Station (new version). I have the latest Aiport Utility software 5.2.1 but when I go to the hard drive section it does not see it. The drive is connected via USB. Can anyone help me please.

    Hi, this could be caused if the hard drive isn't in the right file system. To make it work, it needs to be formatted in a 'MAC OSX EXTENDED' format. You can do this in Disk Utility if you connect the drive directly to the computer and go to applications/utilities/disk utility.
    Another question that may be asked this external hard drive, does it have its own power supply? If it does it should be ok, but some small portable thieves power which the router probably wont provide. If this is the case you can sort it by getting a powered USB hub (which don't cost much).
    Another issue you might come across was a bug I found if you give the Hard Drive a name and connect it to the router and it appears and the next time you unplug the router power and connect it again it sees it but you cant connect to it on any computer over the network, the hard drive name needs changing every time you unplug the router, its a silly bug but im glad I finally worked it out.
    Also, Airport Utility has a new software update, so have a look for it, should be 7.2.1 now!
    Let me know how you get on!

  • HT204291 I can't remember the password for my airport utility speakers and it doesn't offer the option to re-set the password.

    To play my I Tunes through my hi fi speakers, Airport utility is asking for a password that I don't know and it doesn't offer the possibility of changing the password.  How do I do this?
    Thank you,
    Yogi Tracy

    In order to reset the password on an Airport or Airport Express, you need to do a factory reset on the device. You should be able to find that information in the manual.
    http://support.apple.com/manuals/#peripherals
    If you need more help, you might be better off asking in the relvant forums:
    https://discussions.apple.com/community/wireless
    Best of luck.

  • How can I block a website without using an admin account and other accounts for my children?

    i want to block a particular website so my children wont see it, but i cant seem to find a way to restrict it without having to create different accounts; i would like to just block it on this account, like on the restricted sites option on internet explorer, is there any way?

    For just simple site blocking, try BlockSite: https://addons.mozilla.org/en-US/firefox/addon/3145/
    You can password protect BlockSite, but it is possible to bypass.
    For full parental controls, there is FoxFilter: https://addons.mozilla.org/en-US/firefox/addon/4351/ - however this seems to be fee supported.

  • How can I block account somebody created using my ...

    Today I have received an email confirmation about "my now account" ... I didn't create new account and somebody user my email address and my skype name (with one number at the end) to create account. How can I delete that account or something?

    report them to [email protected], and request to unlink your email address from that unauthorized account.  
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • Can see the site if I use link visit

    After publishing the site I can see it if I click visit... but if I type the name of website www.imagesofnormandy.com into say google it comes up as a mac error....what is going wrong? I'm now 4 hours trying to get this resolved!! Short of remaking the whole site I don't know what to do... thank you

    You probably need to go to the place where you have your personal name and make sure that it still has the correct info about where to point it.
    It should probably be pointed at:
    http://web.mac.com/normandybeaches
    By the way, you have probably chosen the worst possible name to give your site inside the iweb app (http%3A_web.mac.com_normandybeaches_www.imagesofnormandy.comhome.html). If I were you, I would change this to something short and simple like "ion", republish, and reupload.

  • My iPod Classic has been stolen - can Apple block the thief from using it?

    My iPod Classic has been stolen. Can Apple stop the thief from downloading new tunes to it?

    No.
    (121028)

  • How can I add a client wireless usig Airport Utility 6.0?

    In menu airport of firmware 6.0 there is not window "Add a wireless client". I'm using Mac Os lion with Airport Utility6.0, how can I add a client wireless with this firmware)?

    If you have a dual band AirPort Extreme, you can add another to "extend" both bands of your network to provide more  wireless coverage.
    The "best" way to do this is to connect the "remote" access point back to your main AirPort Extreme using an Ethernet connection. This preserves bandwidth on the network better than any other method...and...you can locate the "remote" Extreme exactly in the area where more coverage is needed. Instructions for thhis are here:
    http://support.apple.com/kb/HT4260
    You might be able to connect using wireless only, but this is always "Iffy".
    In general, the Extreme would need to be located approximately half the distance from your main router to the general area that needs more coverage. But, walls, ceilings and other obstructions usually come into play, requiring some experimentation. Instructions are here:
    http://support.apple.com/kb/HT4259
    If you elect to try wireless, you really won't know if things will work until you try. Recommend that you have a "Plan B" if wireless does not work for your purpose.

Maybe you are looking for

  • Can't send single-page PDF files to other apps

    When someone emails me a PDF with multiple pages, the files appears as an attachment in the email and I have to click on it to view it.  Once I click on it, I am taken to a full screen view of the PDF and I can scroll to see the other pages.  When I

  • Sending MBP in for repair, $50 reinstall fee if accidental erase...

    Hello-- I was going to send my computer in for repair recently and the mac genius asked whether I wanted to pay $50 in case things were accidentally erased/lost. I was kind of surprised that would be something I would have to pay for. Is this normal,

  • Not able to compile my program

    Sorry to post a very basic question in this forum, but I am very new to java, and I have just installed J2SDK in my system, which is having Windows 2000 Professional (OS). My question is in which directory (path).... we need to save our (.java) progr

  • Error in startup after fresh install

    I have Final Cut Express and accidentally deleted LiveType. I put in the disk to reinstall and after it installed, I checked to see if it works right but there's some error when I open it. How can I fix this? Screenshot of error message - http://img2

  • How to read and select only a specific lines from a CSV file. Pls help

    I have a java application to read a CSV file. I've already managed to read them all and output it to System.out.println(). Now the problem is I want to select a specific row of the records. How do I do it? Below is the codes i've typed. FileReader fr