Can I boot into Windows XP from a firewire enclosed Hard Drive? Boot Camp

I understand you can install XP (as long as it has service pack 2 or 3) on an Intel Mac using Boot Camp, but I was wondering if it would be possible to take a HD from a PC computer which already has XP installed, and, using an firewire HD enclosure, boot the Mac into XP from that. Would this be feasible?

Yes, but not exactly. The page says:
"Can I install Windows on an external drive?
No. Installing Boot Camp on an external hard drive is not supported."
But I don't want to install Windows, I want to boot my computer into it.
It also says:
"External FireWire disks are not recognized by the Startup Disk control panel in Microsoft Windows. To start up from a bootable external drive, press and hold the Option (Alt) key while the computer starts up, then select the external disk."
I don't mind if external disks won't appear under Windows, as long as I can still boot into it.
I found another helpful post:bootcamp windows 7 Firewire external drive NTFS?
Here someone writes:
"I still use Windows XP with my Mac but still never had such a problem with my two Firewire external HDs (one FW400 and one FW800).
And I did a lot of things with these
Partioned one for use with OSX and Windows (one HFS+ partition; one NTFS partition); copied my complete MP3-collection (180GB) from one external HD to the other; etc.
All without any kind of glitch or slowdown."
So it seems this person was successful in booting XP from an external drive. Windows 7 or Vista on the other hand will encounter problems booting, which that tread explains.
In another thread (Boot camp on an external hard drive) someone wrote:
"I believe there might be a way, I just haven't gotten around to trying this out.
1) use disk utility to partition the external drive to ntfs (i think)
2) attach this disk to a pc and install the OS
3) install refit onto your mac
4) attach the drive via fw800, or even better yet esata, to you mac.
5) Start up your mac
6) choose the win xp option from the boot menu
7) install bootcamp drivers
this seems, in theory, that it should work."
So from what I gather, I think this method would probably work, I just want to know if anyone had any specific knowledge regarding this subject.
From here I only have two questions:
Is it possible to take a working drive from a PC which already has XP installed, and change the format to ntfs under OSX without damaging the drive or OS?
And, would I need a version of XP with service pack 2 or 3, or will anything do, since we are not installing it with Bootcamp, we are only running it under Bootcamp at this point.
Thanks for any help!

Similar Messages

Can I use my Intel-based MacBook to boot into Windows 7 from an external HDD?

Okay, so I need to use Windows for some simple applications. Problem is, I don't have a Windows desktop anymore and while I have both Windows and Linux partitions along with Mountain Lion on my installed hard drive, I'm probably going to wipe said drive and just use the entire partition for Mountain Lion. That said, I'd like to use an extra hard drive I have lying around to boot Windows.
My questions are:
1. Does my MacBook support USB boot to Windows?
2. If my laptop does support this, can someone point me to a set of good reliable instructions to install Windows onto the external hard drive and boot into it by USB?
Thank you; have a blessed day!

You seem to have a triple boot system that was done using the 10.6 installer disk and a copy of rEFIt.
I know because I had the same thing once.
I can tell you what will happen if you decide to upgrade 10.7 or 10.8
1: The EFI and GUID is going to change, rEFIt hasn't been updated in ages since 10.7 started rolling out back in about June 2011. There will be adverse effects with rEFIt so I hear.
2: The 10.8 upgrader is going to barf at your triple boot system, it will upgrade the 10.6 partition but warn you that the 10.8 RecoveryHD partition (10.7 and 10.8 both install) that it normally installs at the very bottom of the drive will not be installed and you can't enable Filevault.
Intel Mac's can have only 4 bootable partitions on the drive, the 10.7+ installer is normally dealing with EFI, MacintoshHD, BOOTCAMP, RecoveryHD. It barfs at anything else it doesn't understand and will not install RecoveryHD partition, which on a non-Internet Recovery capable hardware is required to reinstall the currently upgraded OS X operating system version. But you can always go back to the 10.6 disks and wipe and restore that way or via 10.6 USB boot key.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
So with 10.7+ you'll have to use something like Carbon Copy Cloner for the OS X partition.
So since rEFIt is going to be hosed, so will your ability to use the EFI based program to boot into the three operating systems at boot time.
I assume you found this out and why you want to dump Windows on a external drive. However Apple's EFI doesn't recognize Linux as a boot option.
There is a rEFIt fork that will allow Linux to boot on a Mac: http://www.rodsbooks.com/ubuntu-efi/index.html
Windows as you now know can't be booted off a external drive, however if your use of it is minor, you may want to consider using a virtual machine to run it in OS X or Linux instead using the free VirtualBox.
Windows in BootCamp or Virtual Machine?
You should Carbon Copy Cloner the OS X 10.6 partition to a external GUID OS X Extended J (JHFS+) drive.
You can use WinClone 3 in OS X to clone the Windows partition to a external drive, but it's a backup only, no booting capability. Restoring it will boot on the internal drive of course.
Linux you should already know how to clone it to a external drive using dd.
I advise you use the 10.6 install disks to set up your new partition scheme, but your going to have to uninstall rEFIt and return the machine and firmware back to basic Apple factory system as possible before doing anything.
EFI doesn't get erased, it resides in NVRAM and the EFI partition, controls the at boot key commands to boot off OS X install disks, so it's important to uninstall rEFIt completely before upgrading OS X.
If the Windows version your using is XP, to install that first using BootCamp in a fresh 10.6 install and reverse clone using WinClone before upgrading to 10.7 or above. It will be grandfathered in, but can't be reinstalled later.

How can i transfer my itunes library from a PC external hard drive to iMac?

I have recently bought a new iMac but my iTunes library is on an external hard drive that is formatted for PC use, this is then linked to my old PC laptop, how can i get the library onto my new iMac?

Drag the entire library to the Mac's internal drive, launch iTunes with the Option key held down, and point it to that library. If the library only contains the music and not the iTunes database files, drag it into the open iTunes application window.
(80731)

Can my itunes library be sourced from more than 1 hard drive?

Currently my iTunes library is on an external 3TB hard drive but is filling up fast. Can I just add another hard drive and have my itunes library on more than 1 HD or does it need to all be in 1 place?

Hmmm... I think there may be a snag in that regard. Although the library is separate, the preferences settings are the same since those are not part of a library but part of the user's library (as in computer user account, not iTunes) preferences. I do have multiple libraries (for different non-Apple mp3 players I manage) but they share the same media in part and since day one I have always not had iTunes manage my media which is stored on two different internal drives. Of course if you do that then having a single set of preferences doesn't matter since they aren't being used anyway, and that may be the way you would have to go. I dont' really want to mess with my preferences settings right now to test if one could get it to work with default settings -- it would be a huge mess if iTunes suddenly thought I wanted it to manage my media!!
Edit: You can also hold down the option key while dragging media to a library to override iTunes preferences to copy to media folder. You could do this for a low management library such as a movie library where you are not adding and subtracting things on a daily basis (unless you can afford new movies every day).

Unable to boot into Windows 7

Hello, today I was playing some video games inside of Windows 7, upon noticing that whenever the computer had an area that text could be entered, it would spam the space bar into that area. Ex. when i would hit the start menu, in the little text box that is for searching, the courser would move continuously across it, as if the space bar was being pressed. So I restarted. As normal when I heard the startup chime i pressed and held the option key to bring up the OS selection tab. But instead of bringing up the menu, it booted straight to OSX. (i tried this a few times with the same results). So I went into the bootcamp menu in settings on osx and selected windows as the startup OS. I then restarted. When the computer started up I was prompted to select Windows 7 to continue the boot process, so I did. It then went to the starting windows screen where it became stuck. I force shut down and tried again, but this time i tried to repair the disk in windows. The first time it failed to repair, then i did a memory test and when it restarted it worked. In windows i told bootcamp to use OSX as the startup disk and tried holding down option to go back to windows again, nothing, it went to osx. So in osx i went into the bootcamp menu in settings again, and selected windows and restarted. It got stuck on the selection screen in windows and i force shut down and tried again, but this time with with repair again. This time the repair was successful and it went to windows normally. So now it appears that i can only boot into windows by telling bootcamp that i want to boot into windows automatically. Holding down the option key does not seem to bring up the disk selector. I can verify that the option key does work because i tried 'command+option+esc" and it worked. any ideas on what the frik is going on?

Update! So apparently I believe the problem is coming from a few windows updates that are out. Whenever I repaired the disk it always uninstalled those updates. I repaired the disk again because it got stuck on bootup and when i logged back on it asked me to re install those updates. without them installed the option key thing worked again. So i guess i wont be updating this thing anymore...

Cannot boot into Windows XP, should I replace hard drive?

THE PROBLEM: I have not been able to boot into or use Windows XP (SP2) for almost 3 years. I have been using Linux instead for 3 years and am using it now. The Windows Recovery process only half works, it works up until you have to boot up the computer from the hard drive. Then it no longer works. The computer will load the files from the TOSHIBA Recovery and Applications/Drivers DVD that came new with the computer onto the hard drive. But when you get to the point of booting off the hard drive, with newly added Windows & Toshiba files, nothing happens. It does not boot up into Windows XP. In fact I can see the newly added Windows & Toshiba fileson the hard drive when I boot into Linux (Live) off the hard drive.
THE HARD DRIVE (Specs below): I ran a SMART Data check using a Linux (Ubuntu) Disk utility on the hard drive and it passed everything except for Reallocated Sector Count. There are 20 bad sectors. I called the Toshiba 800 # on the DVD and they told me that the problem may be the hard drive. A new TOSHIBA Recovery and Applications/Drivers DVD costs $40. Toshiba also said there is no Windows XP Recovery Console on the DVD.
CAUSE OF THE PROBLEM: I think, and TOSHIBA agreed it is either the hard drive or corrupteD files on the TOSHIBA Recovery and Applications/Drivers DVD
POSSIBLE SOLUTIONS: I have found a couple of sites that seem to have instructions for making a Windows XP Recovery Console CD. And I have thought I might try to run some Windows XP Recovery Console commands from such a CD, such as fixboot, fixmbr, etc. The try to see if I can boot into Windows XP from the hard drive. If I can, then that might suggest he problem is corrupted files on the TOSHIBA Recovery and Applications/Drivers DVD. If I still cannot boot into Windows, then maybe I should replace the hard drive. This should be very easy to do.
QUESTION(S): Does anybody have any comments or suggestions? Does my approach sound good? Do you have any other suggestions?
I have a TOSHIBA Satellite L25 S1216 that I bought new in early 2006. It has a 40 GB (5400 RPM) Enhanced IDE (ATA-6) 9.5 mm height hard disk drive in it. User removable, i.e., it is easy to replace.
Thank you,
Bob
Solved!
Go to Solution.

My plan is to try to use the TOSHIBA Recovery and Applications/Drivers DVD to load the WIndows XP files onto the hard drive, then use the Windows XP Recovery console CD I downloaded from here
http://www.proposedsolution.com/downloads/download-windows-recovery-console/
by using commmands such as fxmbr, fixboot, etc to see if I can get the computer to boot up into Windows XP.
Good plan, Bob!
Description of the Windows XP Recovery Console for advanced users
A backup plan would be to obtain a Windows XP installation CD from eBay or wherever. They are super cheap now. Then you could install Windows clean and add the drivers and utilities from the website here. Or you could use it to repair-install Windows.
How to Perform a Windows XP Repair Install
You are entitled to activate Home Edition for free. I understand that even after Microsoft no longer supports Windows XP (in April), they will honor activation attempts.
I wouldn't mess with SSDs. And stick with IDE PATA drives. You won't need to worry about advanced-format technology since that didn't come along until the very recent SATA drives. Your BIOS should support 120GB (KB303013). Some here.
-Jerry

Can only boot into Windows 7. Can't even boot from Snow Leopard DVD.

I have no idea what prompted this. I don't recall installing any OS updates recently, other than some Windows Live apps in Windows 7.
I have an early 2009 Mac Mini with Snow Leopard, and have Windows 7 64-bit installed in a Boot Camp partition. When I installed Windows 7, I couldn't get the Boot Camp utility to install within Windows (I guess because it's 64-bit) so to switch back and forth between OSes, I just shut down the Mac and restart it with the Option key pressed, and select Mac OS X when I want to return to Mac. This has worked for about a month and a half now (ever since I got Windows 7). Suddenly I have problems.
I first had problems booting into Windows or Mac. I got to the grey screen with the Apple logo, with that spinning "progress" thing going for a while, then it would freeze up and get stuck on the grey screen with the Apple logo. I zapped the PRAM. No help. Then, after disconnecting all external drives (I have several) and extra USB devices, I was able to boot from the DVD install disk and reinstall Snow Leopard on my internal drive. Joy, or so I thought. Then I booted into Windows 7, and after some weirdness getting it to start, it did successfully start and ran just peachy.
Then I turned off the Mac and held down the option key (as usual) to return to Mac OS. But now all that happens is that I get a grey screen for a few seconds, then the Mac boots back into Windows 7, which seems to work fine. (I'm in Windows 7 right now.) I turned on one my external drives (Snow Leopard installed, connected via Firewire 800) in hopes that the Mac would boot into that, but same thing. Ignored and back to Windows 7.
Then I thought I'd boot from the install DVD again by putting it in the drive and holding down the C key as I restart, but the same thing--a grey screen for a few seconds, and then booting right into Windows 7. I can't seem to escape Windows 7! It's a bit disturbing when it won't even recognize the install DVD.
I tried to call Apple Care since I'm within my 90 day support window, but of course they are closed. I'm figuring that I'm going to have to take this into an Apple Store, but thought I'd see if anyone has any ideas. Any advice will be appreciated. Thanks.

According to Apple, Win 7 64bit is supported with Bootcamp 3.0. If bootcamp 3.0 is available; I could not find it anywhere on Apple's website. It appears the most recent version is 2.2. The only place I could find 3.0 is not on Apples website and it's a questionable source so I won't post it here.
It may just be a matter of time before Apple makes it available. I'm not suggesting you wait, however if the install disk can't be used, I'm not too sure where u could go from there. Calling Applecare might work.
If you do a simple google search using the terms 'download bootcamp drivers windows 7' u will see what I was referring too.
Here's what I found from Apple (It doesn't specifically mention 64bit however just win7): http://support.apple.com/kb/HT3920
This is not from Apple, but specifically addresses whether they support win7 64bit: http://www.macnn.com/articles/09/08/31/boot.camp.win.7.64.support/
Here is more info about bootcamp 3.0 and win7: http://www.apple.com/support/bootcamp/

Can't boot into Windows??

Hi!! This is my theory about not being able to boot into windows. If you have made a system repair disc like you should have made on day one; and your PC will not boot with the system repair CD, you probably have some serious hardware problems.
I'm going to steal this reply from cee64 again. A system repair CD can be made from any PC that is running W7 ect.
Hi I'm going to steal this reply from cee64. I'm sure he won't mind!
"It is quite possibly the hard drive is failing or has failed. The reason you can't get into the bios or boot from a CD/DVD is because the bios it hanging trying to recognize the hard drive. Try removing the hard drive and see if it will allow you into the bios or boot to a CD/DVD. If it does, go the hard drive manufacturer's support site, downlod their hard drive diagnostic ISO image, then use the burn from image option to create the self booting cd, then boot to it and run the most exhaustive diagnosis on it if it will boot. If you can't get it to boot to the diagnostic disk while the hard drive is installed you'll more than likely need to replace the hard drive.
If it won't get you into the bios or boot to a CD/DVD with the hard drive out of the system you need to try reseating the ram. If that doesn't help you probably have a bad motherboard. In this case it would more than likely be cheaper to just replace the laptop than fix it."
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
If Seatools found your HD good, then you have a good chance of using the recovery disks or the recovery partion to restore you back to factory setting. If that fails, you may be down to a bad motherboard. I know of no program to test the MB. You can use memtest 86 to test your Ram. I think it tests some parts of your MB, but can't say that for sure.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Hi! I stole this reply from Jerry Edited One link, because it failed to open
Let's start here. The spec above says your machine came with 32-bit Windows Vista. Have you changed it?
We need to reach the recovery environment. Can you do it this way?
http://windows.microsoft.com/en-US/windows-vista/What-happened-to-the-Recovery-Console
If not, burn a system repair disc from this download (assuming 32-bit Windows).
Download Windows Vista Recovery Environment ISO X86 version (32 bit)
-Jerry
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Can't boot into Windows 8.1 partition after apple store repair

Can't boot into Windows 8.1 partition after apple store repair
I went to the apple store about a week ago to get my screen fixed, and when I get it back I don't have an option to boot into my windows partition. The bootcamp partition is still there, but I can't boot into it. I can still see all of the files on the drive. When I try to boot into windows from the startup disc setting I get "no bootable device — insert boot disk and press any key” on a black screen. I went in for a dead pixel, and the guy at the genius bar ran something on my computer and went into disk utility application. I’m not sure what he was doing, but obviously that’s what messed up my windows partition. How can I be able to boot back into windows? Here's what disk utility looks like on my computer.

Here's the output
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b0 0e 2b |........?......+|
00000020 00 00 00 00 80 00 80 00 ff bf 2e 0f 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 05 92 d3 74 c4 d3 74 aa |...........t..t.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
Here's a better screenshot.

How do I access the music from my Mac drive while booted into Windows?

How do I access the music from my Mac drive while booted into Windows via Bootcamp? I tried using MacDrive but it's not supported for Vista 64-bit edition. Is there another program out there that I can use? I just want to be able to access my music that's on Leopard while in Vista. Any advice will be much appreciated. Thanks in advance.

Your best bet is to move the music on the Windows side since Leopard will be able to read and play the music from the mounted Windows drive (Leopard will not be able write anything to the Windows NTFS partition).
In your case it won't work the other way around.
Axel F.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
Thanks

Hi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can't get past gray screen for OS X but will boot into Windows partition.

Hi- I am really desperate for help here.
Restarted my computer this evening when Front Row wasn't able to find the files on my external HD. When it booted it went directly in to my Windows Boot Camp partition. So I restarted, held down 'option', choose my OS X disk and just got the spinning sun icon on the gray screen for several minutes. It then booted into Windows again. If I hold down 'option' again I can cut it off before it gets to Windows.
I've tried booting into a cloned HD via FireWire and same results.
I've tried booting with the install disk (c key held down) and it won't recognize it.
I've tried Safe Mode (shift key) - same.
I've booted into Single User and done fsck and and it says everything is ok.
- BUT I did notice it says further up- "BSD: rootdisk0s2, major 14, minor 2". Are these errors? If so why didn't fsck find and fix them.
I've tried resetting PRAM and SMC.
The only thing I have done out of the ordinary was an hour before I was trying to get some of my files on my wife's laptop and went into permissions on my HD and changed "Everyone" Priviledges to Read (or maybe it was Read and Write) then chose "apply to enclosed items". This change took about 20 minutes.
The computer is, of course, just over a year old and has worked perfectly up until now.
Someone-Please!!!

Tried that and it just doesn't read the disk. I've booted it with the disc already in and held Shift and also tried it with "C". The same for putting the disc in just as it boots up.
I went into Single User mode again and compared the text against what shows up on the laptop. Their are a few differences. At the very beginning of the iMac text there is:
npvhash=4095
hi mem tramps at 0xffe00000
PAE Enabled
64 bit mode enabled
-then-
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
-then- after "MAC Framework successfully initialized" comes this three times...
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
These are really the only major differences that I can see in the Single Mode screen.
I also have tried booting from the Firewire drive clone on the laptop but it is not an available option for booting. The disk partitions mount but have a lock in the corner and say they cannot be opened because I have insufficient access privileges.

FreeBSD didn't install, i can no longer boot into Windows

I unsuccessfully installed FreeBSD and I can no longer boot into an OS from the HD. I attempted to install BSD onto the "G" drive below however the the install gave me some kind of storage error and I can no longer boot into Windows. While going through the BSD installation process I opted to NOT install a boot manager (I incorrectly assumed that this would leave my existing boot manager intact).
Here's how I was partitioned pre-FreeBSD (these are all partitions on the same SATA 80GB drive):
C:\ Windows ME
D:\ Windows XP sp1a
E:\ Windows XP-64 beta
F:\ Longhorn 64 preview
[G]:\ unpartitioned 4GB
[F]:\ uformatted 4GB
H:\ NTFS Storage
I:\ FAT32 Storage
Before I attempted to install BSD, I used c:\boot.ini as my boot manager.
Now when I try to boot it says:
Code: [Select]
Invalid Partition
Invalid Partition
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot:
Invalid Partition
No /kernel
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot: _
Has anyone else ever had this happen to them? If so how can I reenable booting into Windows?

Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko

Can't boot into windows 7 anymore......

Hi all, I have a Mac mini late 2012 with windows7 installed through bootcamp5. It has worked flawless until recently, now I can't boot into windows anymore. I've checked in finder and the bootcamp partition is present and also all the files. Before that, I did have some trouble with my LaCie 2big thunderbolt hdd, it kept on saying I had to reformat one of the discs in the drive, but only when used in windows, in OSX there was/are no problems reading the hdd .......
Any idea of how I can make windows bootable again?, do I really have to make a fresh install of windows to make it work??
Any help is very much appreciated
Kindly
Jan

You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Can I boot into Windows if it is partitioned on a second hard drive?

I want to put my 2009 MBP hard drive into a 2012 MBP by replacing the optical drive with the 2009 hard drive in a caddy. The 2009 has Windows partitioned on it already through bootcamp.
Will I be able to boot into windows through the second drive or will I have to bootcamp the new 2012 drive with Windows?

OK Cool. I think I will try that. Thanks for the tip. I appreciate it.

Can I boot into Windows XP from a firewire enclosed Hard Drive? Boot Camp

Similar Messages

Maybe you are looking for