Can I break up a video project into smaller projects using prel 10?

I've created a large video project in prel 10 ( the 0s is win7). I want to break it up into smaller new video projects so I don't lose all my existing assembly and editing work. Can I do this and if so how? Thanks

Keep the original project and do a "save as" with a different name for each individual project and just delete what you don't want from each smaller project.

Similar Messages

How can I cut up a video file into smaller bits?

I shot around 3 hrs of 1920x1080 AVCHD in 2 clips (a wide shot of the stage of a musical production I performed in) It all fits in the internal memory of my camera.
Two friends shot medium and closeups in Standard AVI with a view of making a DVD (2 disks)
They will be editing it in Premier Pro standard def.(a 3 camera production!)
When I convert my AVCHD to AVI SD, each of my 2 reduced clips is still too big to fit on one dvd disk as a data disk.
How can I cut each clip in half to fit on a total of 4 disks so I can send them the video?
If I make two AVCHD projects out of each clip in PE9 and share as DV, the quality is badly degraded. Near vertical lines become very jagged and the picture is much softer than if it had been originally shot in SD.
If I make a PE9 DV project and import the AVCHD instead, I get the red line and the picture once rendered is no better.
I have seen references to a lossless codec. Would this do the job in PE9 and how do I implement it?
The 4Media converter does a much better job of converting to SD but how can I cut the new file in half?

I would point out that Standard Def here in Australia(576) is 12% better vertical resolution that in USA(480).
So European & Aussie SD doesnt look quite so bad compared with full HD
In fact if you stand more than 4 metres from a 40" screen, most people cant see the difference between good SD and full HD.because the eye cant resolve such fine detail at that dustance even with perfect vision.
This is providing the original material was shot with a good camera capable of HD and it was downscaled properly.
Converters
I. downloaded trials of the following converters and rank them in the following order
1. 4Media version 6 AVCHD to AVI converter ($37)
2. Prism
3. AVS
4. Wondershare
5. PE9 making seperate SD projects
I found them obviously different with PE9 right at the bottom of the scale! I will never use it again to make a SD project.
Blurryness and jagged or twinkling diagonal lines were the most common faults.
4Media shone above all the others. When used on the highest bit rate was only slightly softer than the ACVHD material with no jagged diagonal lines but it produced an AVI file the same size as the AVCHD.
When I set the bit rate so the AVI file produced was half the original AVCHD, the quality was equal to original SD video Shot on my old Sony Camera that cost me $2000 5 years ago.
I can split the files with this program too!
Judging picture quality
All pictures will have errors and be less than ideal. It's just a matter of how many are acceptable.
The ONLY way to evaluate how good a picture is to view it on the best possible setup. You can't judge vertical resolution on an old CRT TV which is a different number of lines anyway (525 or 625) so evaluation is impossible. Digital TV thru a set top box to a CRT TV is far worse than the original analog.
Because everyone knows SD is worse then HD but it should only be half as bad (576 is about half of 1080)
Because I wear glasses that perfectly correct my focus and slight astigmatism, I have a good rough method of calibrating my eyes so I can relatively judge quality of different pictures on different systems.
I vary the difference between myself and the screen so the left and right edges are in line with my fingers inside the frames of my glasses!
This is equivalent to sitting two thirds from the screen in the average picture theatre where you can comfortably sit without being disturbed by deficiencies of most film and HD projection.
Applying this to my computer screen I can now judge pretty well. If a picture looks really good under these circumstamces it IS good and I can easily see any meaningfull errors.
Using my calibration "method", I found that full HD on my 40" LCD is noticeably sharper than the best cinema in our city (we have 39 of them, some with 8 theaters ) and after enquiries found they are all 1440x768 and not true HD at all.If you get there earlier than when they boot up their projector you can often see this in their boot up screen.
Worse still they slightly defocus them so you can see the pixel structure close up!
The now rare 35mm Film projection ranks even lower by the time copies are distributed.
You can't buy analog TVs or CRT screens anymore here anyway and Analog TV finishes here completely next year.

Breaking up a project into smaller units for YouTube

Hi,
I used FCPX and Compressor to export a 55 minute FCPX movie for YouTube. The resulting 720p file, while looking fantastic, was 4.37 gigabytes and failed to upload to YouTube. Rather than compressing to a smaller, lower resolution movie, I think I'd rather break the movie up into four separate movies and upload those smaller files to YouTube. What I am asking is this: What's the easiest way to break up my project into separate movies, using either FCPX or Compressor?
Thanks!

rebbi wrote:
Hi,
I used FCPX and Compressor to export a 55 minute FCPX movie for YouTube. The resulting 720p file, while looking fantastic, was 4.37 gigabytes and failed to upload to YouTube. Rather than compressing to a smaller, lower resolution movie, I think I'd rather break the movie up into four separate movies and upload those smaller files to YouTube. What I am asking is this: What's the easiest way to break up my project into separate movies, using either FCPX or Compressor?
Thanks!
You can set IN and OUT points in the timeline to export just a section of the movie.
But since you already exported, there is an easier way. Open the exported movie in MPEG Streamclip, set an IN and an OUT point, and do Save As...; repeat with other IN and OUT. This is quick, since it does not recompress the movie.

Dividing a project into two projects

How do I divide my project into two projects so that I can burn it to a DVD? I have 2hrs 40 mins and this is too long. thanks!

Go to the Project Library View and select your project.
Then FILE/DUPLICATE PROJECT and give the duplicate a name like "your name - part 1".
Then duplicate it again and give the duplicate a name like "your name - part 2"
Now you can open "part 1" as a project and delete everything that is in part 2.
Open "part 2" as a project and delete everything that is in part 1.

How to splice 2 imovie projects into 1 project?

How to splice 2 imovie projects into 1 project?

Select what you want from one project. Edit - Copy then double-click other project to load it into the time line. Select where you want to add it (default is at end) and select Edit - Paste.
Geoff.

Error while Exporting project into MS Project

Hi,
Need your suggestion for one issue. While i am trying to export project into MS Project getting following error:
Internal activeX error:[ 0x80020005] (null)
Please suggest to fix the issue.
Regards,
Ranjan

Hi Biplap,
Please goto note 983597.
Import and Export functionality from SAP cProjects 4.0 to Microsoft Project Server .
Prerequisite is
- Only to Microsoft Project Server 2003.
958210-- microsoft project client integration
983597--ms project server 2003 with c project
thnaks
sunil

Why I can't see Apple website videos on Samsung tablet? Used many browsers, same result...

I could not find a website issues community and this one was the closest I could find. If this needs to be moved to a different community, please do so.
I realize it's cross platforms, but web browsing should be the same for everyone, no matter what device is used.
I can watch Apple website videos just fine on Windows/Chrome browser (or IE, Firefox) but can't on Samsung Android/Chrome browser (also tried Firefox, Opera, Samsung browser).
Other websites embedded videos are working (i.e. youtube, vimeo, forums etc.) so far it is only the Apple website embedded videos that are not working.
Any idea why?

If it's any help, here is what Samsung Support says:
Please wait for a Samsung Agent to respond.
You are now chatting with 'Alberto'. There will be a brief survey at the end of our chat to share feedback on my performance today.
Your Issue ID for this chat is LTK1125603600195X
Alberto: Hi, thank you for reaching out to Samsung technical support. How may I assist you?
Alex: Hi there
Alex: Why I can't see Apple website videos on Samsung tablet? Used many browsers, same result...
Alex: I can watch Apple website videos just fine on Windows/Chrome browser (or IE, Firefox) but can't on Samsung Android/Chrome browser (also tried Firefox, Opera, Samsung browser). Other websites embedded videos are working (i.e. youtube, vimeo, forums etc.) so far it is only the Apple website embedded videos that are not working. Any idea why?
Alberto: Hello, I understand that you want to see apple website videos on Samsung tablet, is it correct?
Alex: correct
Alberto: Thank you for the confirmation.
Alberto: What is the model number of your tablet? It starts with GT/SM which can be found on the rear panel.
Alex: Don't have it with me but it's the Tab S 8.4
Alex: Same goes for my phone, Galaxy S5
Alberto: Okay,Do you see any error message while browsing?
Alex: nope, no error, it just won't play any video on apple website, ALL other websites videos are plaing OKare
Alex: playing Ok is what I meant
Alex: and this is the same for my tablet AND my phone
Alex: devices are updated to the latest software bla, bla
Alberto: Alright, please restart the tablet once.
Alex: scale of 1 to 10 on tech advance level, I am at 7-8, just so you don't take me through power recycle and such
Alex: you just did
Alex: it's not that
Alberto: Could you give me a few minutes while I gather the information for you?
Alex: you can grab a galaxy tablet or a phone and try for yourself and yo'll probably notice it won't work...
Alberto: I appreciate your time and patience.
Alberto: As you are able to see other website's embedded videos on your tablet, it could be an issue with the compatibility of Apple website.
Alberto: There should be no issue with the trablet as other websites are working fine.
Alex: Can you transfer me to your Guru tech person to see if I can get a more elaborate answer and maybe a fix for this?
Alex: Then why the apple videos work fine on windows PC and the ONLY ones not working are Android devices?
Alberto: I have rechecked the information.
Alberto: As you are facing an issue only with a particular web site there should not be issue with the Samsung tablet.
Alberto: Also tablet is working fine with other web sites which indicates that there is an issue with that particular web site.
Alberto: There is no separate setting on the tablet to access any particular web site.
Alex: This much I figured, problem is what is causing it and how it can be solved? Again, issue is only on Android devices. PC Windows and iOS devices work good
Alberto: I am afraid; Samsung do not have information about the issues with a particular web site.
Alberto: I would have surely helped, if there had been information available with me.
Alex: Yes, I was afraid you'll say this...
Alex: Do you have an android device there? Try it yourself and see it will not work. Whatever it is IT IS A PROBLEM!!!
Alberto: I understand your requirement; however, it will not be possible for me to check this from here.
Alberto: You need to contact the web site support for further assistance.
Alberto: Is there anything I might be able to assist you with?
Alex: yeah, it went as expected, no fix for this... do you have a level 2 or 3 or 4 tech there?
Alberto: I will transfer this chat to my supervisor.
Alberto: Please be online while I transfer this chat.
Alex: sure, thanks
Alberto: Not a problem.
Please wait while I transfer the chat to 'Sammy'.
You are now chatting with 'Sammy'. There will be a brief survey at the end of our chat to share feedback on my performance today.
Your Issue ID for this chat is LTK1125603600195X
Sammy: Hello Alex. I am the supervisor of Alberto.
Sammy: I am going through the previous chat session.
Alex: Ok, thanks
Sammy: You are welcome.
Sammy: I appreciate your time and patience.
Sammy: I see that you are unable to access Apple website videos on your tab.
Alex: and on my S5
Sammy: As you are able to access the videos from all the other web sites, it is not an issue with Samsung tab and Samsung do not have any control on this issue.
Sammy: It is an issue with that particular web site and you need to contact the web site support for further assistance.
Sammy: There is no separate setting on the tab to access a particular web site.
Alex: Yes, I need to do that. At this point it's the technical aspect that bothers me, not that I can't watch the video, I can use my iPhone or my PC to watch the video, but why the Android can't?
Alex: Thank you Alberto
Alex: or Sammy
Sammy: I understand your requirement; however, we do not have any information about this issue.
Alex: Ok, thanks
Sammy: I apologize for the inconvenience.
Sammy: Is there anything else I can assist you with?
Alex: no
Sammy: Thanks for chatting with Samsung Support. If you have a minute, please click on the blue “X close” button to receive the transcript of your chat and fill out a brief survey to help us serve you better.
Follow Samsung Service on Facebook, Twitter and YouTube.
Chat session has been terminated by the Samsung Agent.

How can I split a pdf file into smaller files using Acrobat XI

How can I split a pdf file into smaller files using Acrobat XI?

Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them

Where I can get an online solid video toturial training on to use DreamWeaver? Thanks.

Where I can get an online solid video toturial training on to use DreamWeaver? Thanks.

The interface in DW has changed several times since CS6 (12.0) came out. See links below for details on what has changed. Also, you can customize your Workspace.
Workspace overview | Learn Dreamweaver CS6 | Adobe TV
New Features in CS6 12.2
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-creative-cloud-release-feb- 2013.html
New Features in CC 13.0
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-cc-2013.html
New Features in CC 13.1
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-131.html
New Features in CC 13.2
http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-13-2.html
New Features in CC 2014 June Release
http://helpx.adobe.com/dreamweaver/using/whats-new-2014.html
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
Nancy O.

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

I Movie 09 can I combine projects into one project?

Can I combine 3 seperate IMovie projects into one so I can burn a short film to DVD?
I had three different people shoot 3 different sections of a short for me, now I want to put them in one project together in order and burn a DVD.

you can copy (copy all) the clips from one project and paste them into another clip, but music and titles will not come with that. If you export one project as a .mov file and then reimport it into iMovie as suggested, that will easily work, but you wont be able to edit that movie's music or titles.
rr

Problem when importing several (2,3 or 4) video files into one project.

Im creating a project video with several videos running at the same time in one screen. Sort of like a surveillance with different videos but for some reason one of the video file seems to change from 45 seconds to 3 minutes. When all of the video files are 45 seconds but after effects seems to put that video file into 3 minutes. I even deleted the file and imported another video just like it and it works fine until I open the project again. I am using AE CS4.

I hope I did this correct. The first link shows the video length of the videos, this is how it is suppose to be. Then the second link shows the problem in which one of the videos after (after effects) is closed and then opened again. One of the video seems to malfunction and shows that it is longer then 45 seconds. I tried to delete it and open up another one... and then another video seems to malfunction.

Can't embed a Captivate video (swf) into Power Point 2007

I am trying to embed an Adobe Captivate video (swf) into power Point 2007. I very carefully followed all the steps outlined from a search I did on the web and it is not working.
These are the steps I followed:
1. Create a simulation using Adobe Captivate and publish it as a SWF file.
2. Open the PowerPoint presentation and insert a blank slide for adding simulation.
3. We need to work with the Developer tab now. If you can't see it in the ribbon, follow these steps to make it visible.
(steps to get developer)
4.On the developer tab, in the Controls group, click More Controls
5. In the list of controls, click Shockwave Flash Object and click OK.
6. Drag diagonally to create a box in which the simulation would appear. Don't worry about sizing it accurately; you can adjust it later as well.
7. Right click the Shockwave Flash Object, and then click Properties.
8. On the Alphbetic tab, click the Movie property. In the value columnm type the full drive path, including the file name.
9. Set the Playing property to true, Loop to false and Embed Movie to true.
10. Close the Properties dialog and test the movie.
The simulation will now play in your PowerPoint presentation.
Note: If during the slideshow,t he simulation doesn't play automatically, right-click and select Play.
I followed these steps, and it is just not working. I go to play my power point presentation and set it to play from the beginning, and when it gets to the slide with the swf file, I just get a faded out still picture of the video, and it will not play. If someone has had luck with embedding swf files from Captivate into Power Point, please let me know how you did it. Thanks.

Thanks, I really appreciate the information. The only problem is that I have to keep it as a power point presentation. I convert from ppt to a video, so I need to keep it as power point.
I found these steps on the internet and followed them exactly, and went through the steps 3 times, to make sure I wasn't leaving anything out, and it just didn't work. I have a tech guy who's supposed to call me today regarding this issue, and hopefully he'll be able to go through it with me step by step to try and work it out.
Ultimately, these are going to be training videos that are going to be set up on a website, so they ultimately have to be saved as videos.
I'm keep trying to figure it out though.
Thanks.
Ariane

How can I combine to different projects into one project?

I would like to combine various projets into one project is the possible.

Hello Tom,
I have tried to copy and paste the two projects, both in the project library and in the timeline. In the timeline the paste option is not highlighted and paste does not work. In the project library I highlighted the project and copied the project, but I was unable to paste into the other project. Is this done in the project library? The paste option is hightlight but each time I paste it does not work.
Thanks for your help

I can't get audio or video files into iTunes from my computer. Please help!

Using Windows 7: My wife and I have seperate iTune accounts in our respective computer profiles. In my profile and iTune account, everything works fine. In my wife's account, she's always being asked to sign into iTunes as an administrator. Also, her account will not allow her to transfer music or video files into iTunes by drag and drop. If I click on "Add File to Library" or "Add Folder To Library", It will add the file but double it in the process so there are two of everything. And to make matters worse, when iTunes open in her profile, it changes the color of the Windows theme. Someone PLEASE help me. Thank you.

Am I correct in saying that the file is on your computer? Is it in a format that iTunes recognises?
If so, open iTunes, click on the small icon in the top left of the iTunes window and select Add File to Library. Navigate to the folder where the file is located and select it, click on Open. The song is now in your Library, but don't forget that the song's title, artist etc. will reflect the information within the file. So if the file did not have a song title or artist, it will appear in your iTunes as something like "Track 01", by "Unknown Artist".

Can I break up a video project into smaller projects using prel 10?

Similar Messages

Maybe you are looking for