Can I build a test over several pages, and give instant pass/fail feedback.

I want to build a test over several pages. I would like to have buttons where you click on the answer, and at the end of the test show pass/fail and answers to failed questions. I also want to show the percentage to the test answers, such as 76% out of 100%. I would like to adjust the percentages depending on the amount of answers per questions. Let's say there are 7 questions for the test, a passing score would be 71%, if there are 5 questions, a passing score would be 80% and so forth.
I am sure there are many questions regarding this, feel free to ask any and I will answer as much as possible.
I have Keynote 09, Numbers 09 and Pages 09, I would prefer to work with Keynote and hopefully use the other two as needed.

chrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

Similar Messages

How to generate row numbering over several pages in PAGES??

How can I generate row numbering over several pages in PAGES??
e.g. Page1 1-35
Page2 36-...

Hi Labrat,
My suggestion would be to create a Template in the Page Layout mode. This template would have a 1-column Table to present the line numbers and a Text Box for the Body Text. If you want the Line Numbers to stay in alignment with the Body Text, set the spacing for both to Exactly. Set the Table Cell Borders to None. The faint cell borders that you see in the following example are there because I am in View Layout mode. They will not show when printed.
For my example I have used Format > Advanced > Capture Pages to create a Pull-down +Page option for a Numbered Line Page. You can Capture as many versions of your numbered pages as you like to avoid having to modify the Line Numbers on successive pages.
Here's my example:
Regards,
Jerry
Message was edited by: Jerrold Green1

How can I create 2 columns that go over several pages? f.e. Contract with 2 languages.

I need to create 2 columns over several pages.
Target is a bilingual german/english contract.
All paragraphs side by side. Left side german right side english.
My problem is that if I use standard columns the text flows on the next column of the same page instead of same clumn on next page.
Example:
I do not like
EN     EN
EN     EN
EN     EN
EN     EN
I need.
EN     GER
EN     GER
EN
EN
EN
EN
EN
EN
Can anyone help. Do I have to back to MicrosoftWord.
Please not. Thank you.

HI,
You could use two sets of linked text boxes, as I've done here.
The text layer of this document contains only a series of Page Breaks, necessary to create the pages on which the Text boxes are placed. The illustration shows parts of pages 1 and 2.
Create the series of text boxes that make up the left column, then Select All and Duplicate to create the second set.
I found alignment a bit of a hassle, and that alone might be enough to convince you to use MS Word (or the word processing module of one of the free Office applications) for this task.
You might also use the Provide Pages Feedback menu item in the Pages menu* to make a feature request to Apple.
Regards,
Barry
* Got it right this time, fruhulda!

Printing using Mail - Vertical printing over several pages error

Hi All.
Wonder if anyone can help here?
When I want to print any email from Mail, for some odd reason the email gets spread out over several pages or more depending on the size of the email. The text is printed in one vertical line consisting of one letter per line, like this:
t
h
i
s
i
s
h
o
w
I have to copy and paste each email into text edit and print from there.
If anyone can help, that would be great.
Cheers
Steve
G4 Mac OS X (10.3.9)

Hi All.
Wonder if anyone can help here?
When I want to print any email from Mail, for some
odd reason the email gets spread out over several
pages or more depending on the size of the email. The
text is printed in one vertical line consisting of
one letter per line, like this:
t
h
i
s
i
s
h
o
w
I have to copy and paste each email into text edit
and print from there.
If anyone can help, that would be great.
Cheers
Steve
G4 Mac OS X
(10.3.9)
Hi Steve,
I have the same problem with the text in Mail printing very narrow like what you described. Did you ever get a resolution to the problem?
It seems like it was never answered in the forum replies.
Hope you can help out if possible.
Danny

How do I break a large table over several pages?

I'm sure I used to be able to show a large table (more than one page long) over several pages. Now, when when the table grows to the bottom of the page the whole table is displayed on a new page. How do I get it to break so it shows partly on one page and partly on the next page?

Not sure how to add a comment to my own question...
I am working in Pages 5. I tried to break a table over more than one page in an existing document and just couldn't get it to work (still can't). I tried it in a new document and it worked, no problem. The only thing I can think of is that I had to export my original document to Word and then had to open it again in Pages. There must have been some corruption.
I'm happy again... only wish that I could live within the Mac world and not have to deal with the PC world. Sigh.

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup dis

i clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup disc is full (activity monitor shows 3.99 of 4 GB used) and then another stating the download had not occurred due to the disc being full. most of the tunes still appear to be in the cloud but the disc is said to be full, spent a good period of time trying to investigate what has happened but failed...I'm not well up on all of this as an old chap so any help would be wonderful.....

unclefossil wrote:
Thanks Michael, what is the best way of backing up, should buy a cheap standalone external hard drive rather than relying on the Time Capsule which is quite sensitive...
If you read the link I provided you'll get an idea of one way to maintain a backup of your music files, use Time Machine, and not take up as much room on the internal HDD/SSD.
unclefossil wrote:
i live in the Scottish Highlands where Broadband is frequently intermittent disrupting backups.
Your internet connection speed has no effect on Time Machine/Time Capsule backups. Since that is all done locally, over your wireless network you actually do not need an internet connection at all.
unclefossil wrote:
Also I wondered if I could increase the memory on the setup disk by replacing the 4GB card already in the MBP with 16GB cards, if I upgraded would that affect anything I have stored already like my iTunes?
You're asking about the computer's RAM. Increasing that will not increase the size of the internal storage available to the computer. You'd need to replace the HDD/SSD of the Mac, which, depending on what model you have may or may not be possible (with new models of Macs).

TA26689 If Your IPod Touch Hasnt Charged Over Several Months And Now It Wont Charged?

My IPod Touch Hasnt Been Charge Over Several Months And Today I Try To Charge It And It Wont Work Even Pluging It In The Computer

Take it in for service.

Can I build a database, using my Contacts and then email them?

Can I build a database, using my Contacts and then email them?

If you mean email them as a group you need to get a group messaging app first. If you mean email the database you need to take a screen shot and email the photo.

Hello. I sold a Macbook Pro, and just before i erased my iCloud account. Nonetheless, I still can see it in Find My Phone" page and cannot erase it from there.

Hello. I sold a Macbook Pro, and just before i erased my iCloud account. Nonetheless, I still can see it in Find My Phone" page and cannot erase it from there.

Did you unauthorize the machine?
Maybe some help here:
http://support.apple.com/kb/index?page=search&src=support_site.home.search_sugge sted.search&locale=en_US&q=unauthorized%20purchases%20on%20my%20accoun
http://support.apple.com/kb/HT1918
http://support.apple.com/kb/index?page=search&product=&q=unauthorized%20purchase s%20on%20my%20account&src=support_site.kbase.search.searchresults
http://support.apple.com/kb/index?page=search&product=&q=unauthorized%20purchase s&src=support_site.kbase.search.searchresults
http://support.apple.com/kb/PH2613
http://support.apple.com/kb/index?page=search&product=&q=delete%20icloud%20accou nt&src=support_site.kbase.search.searchresults

My ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button down for 10 and more and also the home button and it will not turn on, i have tried this over several days and still no response

my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages

Try here:
iPod touch: Hardware troubleshooting
Also try placing the iPod in recovery mode and then try to restore via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Why can't I copy an email to pages and have it wrap to the page?

Why can't I copy an email to pages and have it wrap to the page margins?

Just do a Remove All.
I would first find two consecutive EOL characters and replace with an extra line feed or a visible marker like an ampersand. Then Remove All EOL characters. Then replace all the all the ampersands with a CR/LF. It's pretty quick. A lot quicker than trying to remove 500 EOL characters one at a time.
Or, ask the sender to create the document in a word processor, zip it, then send it to you.

Can I save a PDF file to Pages and then work on it?

Can I save a PDF file to Pages and then work on it?

No. Pages does not edit PDF. Just does PDF an output.

Table over several pages

Hello
I want make a static Table, a dynamic is not necessary.
The person who fill out the form, should be able to do this over more than one page.
But I don't know how to make the SAME table over one page?!
I have no data link in this table, it should only be filled.
Thanks.

Sorry but I do not understand what you are asking ...can you elaborate ...or provide some examples of what you are looking for?
Paul

How to float a picture over several pages....?

I am brand new to Adobe InDesign but I am using it to create a newsletter. I have a jpeg that I was hoping to use as a subtle background for my whole newsletter which will end up being 4 or 5 (non-facing) pages. So far I have not seen a way to do this. It looks really easy to do with a text box where I see a "+" sign at the bottom of the page that I can simply click on and continue the text on the next page. I'm hoping there is something as simple as this to extend a graphic file from one page to the next.....please help!
Also, When I am done I will need to copy and paste this into an email so I am curious how I should go about exporting my file once it is complete. Thank you for your help!!

I get the sense that you want different portions of a very large image to be on different pages. If that's the case, putting it on the master page will not work. Images on the master page will appear identically on all pages to which that master is applied.
To have a different part of the image on each page, the easiest method is to place the image across pages making up a spread. You can assemble non-facing pages into what "looks like" a spread on your screen by opeing the Pages panel flyout menu and unchecking Allow Document Pages to Shuffle (this will keep all pages from shuffling, or you can select individual pages and uncheck Allow Selected Spreads to Shuffle). Once shuffling is turned off, you can drag the page thumbnails in the panel and stick up to ten pages together horizontally edge to edge.
Regardless of how pages are arranged in the panel, they remain individual pages until output, and will only be combined at that point if you export to interactive PDF or specify "Spreads" in the PDF (Print) or Print dialogs. There is a script floating around the forum that will toggle OFF spreads for export to PDF(Interactive) as there is no option in the interface to do that.
The second part of your question is more difficult. There is no way to copy from InDesign and paste into an email and get anything that resembles the ID layout. You can export to HTML from ID, but that is essentially raw code that will require further processing to create a finished layout in HTML. You could export to PDF and add that to an email as an attachment, or put it on a server and include a link in the email, but if you want to have the newsletter itself be the layout, ID is NOT the program to use for building it. An easier solution would be something like MailChimp or ConstantContact.

Can I build a test over several pages, and give instant pass/fail feedback.

Similar Messages

Maybe you are looking for