Can i buy a case for my macbook pro late 2011 that is for retina display macs?

i want to buy a case for my macbook because its starting to get more scratches at the bottom. i was thinking about getting this one:
http://www.amazon.com/GMYLE-Turquoise-Rubberized-Transparent-Protective/dp/B0098 USJJ2/ref=sr_1_1?ie=UTF8&qid=1379609488&sr=8-1&keywords=robin+egg+blue+macbook+p ro+13+case+and+transparent+keyboard+cover

ok so would this case be good?
http://www.amazon.com/Turquoise-Frosted-Macbook-Aluminum-Unibody/dp/B007PWONNG/r ef=sr_1_3?ie=UTF8&qid=1379626178&sr=8-3&keywords=robin+egg+blue+macbook+pro+13+c ase+with+transparent+keyboard+cover

Similar Messages

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • 16GB HYNIX for my MacBook Pro late 2011

    It is taking me so long to find a 16GB memory by hynix (8X2) to install in my Macbook Pro late 2011 . 2.4 GHz Intel Core i7 . 1333MHz DDR3 .
    Need a to upgrade and i think that i need a 204PINN SODIMM
    DDR#-PC3-10600 .cl9 Unbeffered.NON - ECC 1.35V.1024MegX64.
    Please correct me if I am wrong . And if you can assist me where to get it Or maybe SAMSUNG Memory .,Either one is Good but do not Prefere ather kinds.
    Best regards to all.
    Sam

    I actually prefer Crucial - I have the same model as you, but I've 16GB of Corsair in my machine. Had I to do it over again, I'd buy Crucial (particulary now that the prices have come down).
    Go to the Crucial website and use the System Scanner tab - it will let you know your upgrade options. Your machine, like mine, uses  204-pin PC-10600 (1333 MHz) DDR3 SO-DIMMs. I don't know a thing about Hynix, but Samsung is good as well - I just prefer dealing with Mac specialists.
    Clinton

  • How can I work in several languages in Macbook pro late 2011

    Well I am a student that is currently using differnt languagues in the macbook pro
    I need to write in spanish and english at the same time I mean.. I sometimes have to be working with a document in english and one other in spanish and it's really hard for me because when I am writing in Spanish when I have set up the English language the check of the spelling is always changing the word and stuff.
    I have to work both at the same time, I have try to use English and in the correct spelling spanish and just changing but sometimes it does not work with
    I need to have the spelling corrector available because I make mistakes .. I am a human...
    If you have any idea about what I am taking about I will thank you so much!
    Best,

    What apps are you talking about?  Word processor apps often have their own settings for spellcheck language.
    For OS X itself, the best you can do is go to system preferences/language & text/text/spelling and use the set-up option at the bottom of the list to check boxes for English and Spanish only and see if the Automatic setting will work.  Also many apps let you set the dictionary in Edit > Spelling and Grammar > Show Spelling and Grammar.

  • I want to get Windows 8 for my MacBook Pro (late 2011) using Boot Camp, but I have lost my installation disk for my windows. What should I do?

    Please hep me.

    I am fine byuying a copy of WIndows 8 but where would I buy it? Also I was wondering wether I would be able to do this without using a disk, solely online, because my boot camp says insert disk.

  • Will OS Mountain Lion slow down my MacBook Pro (Late 2011) running 10.7.5?

    I have a Macbook Pro (Late 2011) that is currently running OS Lion 10.7.5. I was just wondering if updating to OS Mountain Lion would slow it down in terms of performance, or if it will have any other bugs on my MacBook?
    PS. When updating to a different OS, do I have to back up my files to like a hard drive or something?

    When updating to a different OS, do I have to back up my files to like a hard drive or something?
    A back up is a precaution that you should always have, not just when installing an update to the OS. Its purpose is no different from the seat belt you wear when you drive. Use it all the time, and hope it will never be really necessary.

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

    Hello,
    I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
    What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
    The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
    LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
    http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
    I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
    Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
    I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 3 MB
      Memory: 8 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MBP51.007E.B06
      SMC Version (system): 1.33f8
      Serial Number (system): W8******1G0
      Hardware UUID: *****
      Sudden Motion Sensor:
      State: Enabled
    <Edited By Host>

    For both convenience and speed, I'd recommend replacing the internal hard drive.  Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
    FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
    Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive.   If it were me, I'd take the opportunity to reinstall everything from scratch.
    btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all.  iFixit has tutorials on how to do this.  (Here is a link to the one that I believe is your model.

  • Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Installing RAM in a 2011-2012 MacBook Pro
    There is really only one way to install RAM into a 2011-2012 MacBook Pro and while there are hundreds of DIY videos online, I just like this one, found on YouTube, by “macmixing”.
    Note that there is a difference in the RAM that should be used in 2011 and 2012 models.
    2011 models must use:
    •204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    And 2012 models must use:
    •204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    So here's the video:
    Remember that the 13", 15" and 17" 2011 models (early or late) and the 13" and 15" mid-2012 non-Retina models can handle 4GB, 8GB or (unofficially, but, believe me, it works) 16GB of RAM. There are, in my opinion, only two 100% Mac-compatible vendors out there: Crucial and OWC. I really can't recommend any other brands, even though it may work, as these are the only brands that I've personally used in quite a while. Also remember to stay away from any RAM that is a “value” brand - Macs are picky about RAM and often these value RAM modules just don’t work very well.
    Good luck,
    Clinton

  • Maximum RAM for a Macbook Pro early 2011 15 inch?

    What is the maximam amount of RAM for a MAcbook PRo Early 2011 15 inch?
    I have 8GB now, but I wanted to go up to 16GB. SOme have said not possible, others maybe.??

    You can check for yourself
    OWC  your other best bet  http://eshop.macsales.com/shop/apple/memory/

  • I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
    It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
    ~Lyssa

  • I download adobe flash player for my macbook pro, but nothing that requires adobe flash player works

    i download adobe flash player for my macbook pro, but nothing that requires adobe flash player works. i haven"t tried much, but only because i have no idea what to do.

    After you've installed Flash Player (you have to mount the disk image by double-clicking and the double-click the insatller package) restart your browser and go to youTube, for example, -> http://www.youtube.com/ - and see if the videos play.
    Call back if you need any further help.
    Clinton

  • Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
    If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

  • Can't find the Airplay icon! I have a Macbook Pro Late 2011

    I have a MacBook Pro Late 2011. Yes I am sure that it is Late 2011 because I looked up the serial number and the website says it is indeed MacBook Pro Late 2011. I just bought an Apple TV and I want to use Airplay but I CANNOT find the Airplay icon on the upper right menu bar. I updated my software and everything but I still dont see it! What do I need to do inorder for me to use Airplay? PLEASE HELP!!!!!!!!

    What Mac do you have? It needs to be at least 2011
    OSX needs to be at least 10.8
    Has nothing to do with Internet, you need to check your local network and also make sure both ATV and Mac are on the same network. Airplay should also be enabled on ATV

  • Can you reset macbook pro late 2011 to factory settings

    am trying to get back to square one to use setup assistant to transfer files from old macbook to new macbook pro late 2011 model,

    Hardware wise two resets can be done:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    If you want to wipe the hard drive contents and restore to a brand new Lion installation with nothing else,
    follow these directions: http://support.apple.com/kb/HT4848

Maybe you are looking for

  • Po not displayed

    hi all. i created a po by using the bapi (BAPI_PO_CREATE1). after created there is no mess in bapi error table,  but the po is only in document overview and tables of po. if i use me23n or me22n to display mean it show the error 'this po is doesnot e

  • Middleware errors

    Hi Gurus, In my system other guy make the configuration for the replication to ERP. Now, I delete this configuration follow the  help (delete suscription, publication, site, queue and filter). However, now I only have an error. If I try to create an

  • Want to Change Adapter Engine URL!

    Hi Experts, Currenly my Adapter Engine URL: http://<server>:8001/MessagingSystem/receive/AFW/XI I wan to change the Adapter Engine URL to: http://<server>:50100/MessagingSystem/receive/AFW/XI How can it be changed? Thanks, karthik

  • Pdf on ebooks

    what is the best way to put a pdf on my i phone i have a lonely planet pdf and want to read it on my I phone i've read that ther's a way to change it to a epub file?

  • Logic script considering comments

    Hi everybody, I would like to know wether is it possible to generate a logic script which is able to obtain a comment associated to a dimensional point of the cube. Then it should use the comment to look for a member of a different dimension with the