Can I buy multiple AppleCare  services for the same device?

I'm buying an IPhone here in US, but I'm going to Brazil for a long time.
Must I buy AppleCare in Brazil in order to have warranty insurance there? Is it possible to buy AppleCare+ in US and also in Brazil, for the same IPhone?

As said in another of your posts, the warranty is only valid in the US on a US purchased iPhone...you cannot purchase AppleCare for it in Brazil.  You can only buy AppleCare+ warranty extension in the US since that is the country of origin of the iPhone.
To get warranty coverage in Brazil, you need to purchase the iPhone in Brazil.

Similar Messages

  • Can I have multiple iTunes accounts for the same Ipod?

    Can I have multiple iTunes accounts for the same Ipod? What I mean is can I use multiple iTunes accounts through the same iPod for buying stuff?

    I believe you're limited to syncing DRM'd items from 5 different accounts.
    tt2

  • E4200 v2 - Uses multiple MAC addresses for the same device

    This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
    After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
    Seems the V1 had the same issues that they did not fix on this.
    The Cisco connect software shows 5 devices the Web based utility shows 3??.
    Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

    I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
    Secondly, may I  know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • Where can I buy a nano sim for the new iPhone 5

    Hi all,
    I have just ordered a new iPhone 5 from the apple website and it comes as an unlocked phone. Therefore I need to buy a new 'nano sim' to fit the new phone.
    Does anyone know where and how I go about doing this?
    I've seen that vodaphone have apparently got 500,000 of these new Nano sims in stock, but are they only for people who have bought the phone through them?
    Do you know any other networks or providers that are selling the nano sim, even if you haven't purchased the phone from them?
    Any advice or tips would be much appreiciated.
    Many thanks
    Chris

    Ethmoid
    Re: where can I buy a nano sim for the new iPhone 5 
    Sep 18, 2012 11:22 AM (in response to MaxB99)
    Which is why in the UK it is not really worth purchasing an iPhone directly from Apple - it's a no brainer.  You should always purchase through the phone companies themselves and you'll get a much better deal always.
    I have been with 02 on a contract since I had my first iPhone and have always upgraded for less than half the cost of the iPhone directly from Apple.
    I really don't understand why someone would want to spend at least £525 to £600 on a phone from Apple when you could get it for less than half the cost with the UK phone companies, unless of course money is no object!
    Where do you get your information from?

  • Can I buy a new screen for the 4th gen

         Can I buy a new screen for the 4th gen

    Probably.
    Look online for a company that sells this sort of thing.

  • Can you buy a DVD player for the ipad?

    Can you buy a DVD player for the ipad?

    Yes.
    You will need Logitec WiFi DVD (device)
    http://www.ebay.com/itm/Logitec-WiFi-capable-portable-DVD-drive-LDR-PS8WU2BKW-Bl ack-Japan-New-/221500878434?_trksid=p2054897.l4275
    and
    app software, Verify that this software will work with the above device:
    https://itunes.apple.com/us/app/logitec-wifi-dvd/id562206904?mt=8
    video
    https://www.youtube.com/watch?v=5LdhaeWIptQ&noredirect=1
    Robert

  • Can you buy replacement rubber strips for the bottom side of the magic mouse?

    can you buy replacement rubber strips for the bottom side of the magic mouse?

    To my knowledge, no.
    Barry

  • How can i create multiple accounts but use the same itunes?

    how can i create multiple accounts but use the same itunes?

    Hi iCloud is Making Me Go Crazy,
    You will need to create a new Apple ID for your GameCenter and iCloud services.  You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish. 
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Cheers,
    - Judy

  • Can I store multiple bootable images in the same partition?

    Can I store multiple bootable images in the same partition or do they each need their own partition? I am going to use disk utility to create a copy of my current OSX 10.5 system on a new external drive before upgrading to Snow Leopard. Then I want to create a bootable copy of Snow Leopard. Can I create one partion large enoough to hold both images or will I need to create a separate partition for each. I have done booting off of an external hard drive and it works well. I do not know how the system sees this and thus if I store both images on the same partition, will it give me both as a boot option at startup or will it see only one?

    They will need separate partitions to be bootable

  • Can't create multiple dependent LOVs from the same bind variable

    Hi all,
    I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
    The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
    <iterator id="SelectStaticQueryViewObjIterator"
                  Binds="SelectStaticQueryViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>
    <invokeAction id="refreshDynamicQuery1BindParameter"
                  Binds="ExecuteWithParams1" Refresh="prepareModel"
                  RefreshCondition="#{empty requestScope.VariableChanged}"/>
    <iterator id="SelectDynamicQuery1ViewObjIterator"
                  Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>
    <invokeAction id="refreshDynamicQuery2BindParameter"
                  Binds="ExecuteWithParams2" Refresh="prepareModel"
                  RefreshCondition="#{empty requestScope.VariableChanged}"/>
    <iterator id="SelectDynamicQuery2ViewObjIterator"
                  Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
    Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
    Thanks
    George

    Hi all,
    Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
    Cheers
    George

  • Multiple shipping addresses for the same supplier (depending on the symbol)

    Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
    .& How..
    Thanks

    a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
    a delivery address specifies an address where you want the supplier to send the goods to.
    if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
    in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
    You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
    here you can as well take the address from any address already in your system (e.g. any customer or vendor).

  • Ability to open multiple SQL Worksheets for the same connection

    Hi,
    Please allow the ability to open multiple SQL Worksheets for the same connection, now only one can be opened.
    Thanks

    Logged Bug 9000801 - ea1: otnforum: worksheet launcher does not remember the last/default connection
    -Raghu

  • UWL - System doesnt support multiple tasks assignment for the same assignee

    Hi all,
    we have some tasks coming from our back- end system. When a certain task needs to be substituted to a colleague, no problem ... for one task. When we wish to assign him a second task, we get following message :
    <i>System does not support multiple tasks assignment for the same assignee</i>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/0b/1fc20097b74c41b38621ec2a9454bb/frameset.htm">help.sap.com - substitution</a> :
    <i> System does not support multiple tasks assignment for the same assignee 
    For example: User can only assign one task to an assignee at a time in workflow.
    Collaboration Task does not support other tasks at all.</i>
    Is substitution only limited to one task per person? What would be a workaround? It's possible to create for each combination of tasks a definition in the back- end which is available from the substition drop down list, but this is not what our customer would like to see.
    Many thanks,
    Kevin

    Hi Boris,
    we're using the WebflowConnector.
    Thanks,
    Kevin

  • HT204053 can i have multiple iCloud accounts with the same Apple id

    Can i have multiple iCloud accounts with the same Apple id

    Welcome to the Apple Community.
    No, your ID is essentially your account. You can have email aliases and you can have multiple accounts, but I don't think that's what you are asking.

Maybe you are looking for

  • Client import taking too much time

    hi all, i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing scc3 Target Client           650 Copy Type               Client Import Post-Proc Profile                 SAP_CUST Status 

  • Unable to create the requriments using ExternalRequirement_Create_In

    Hi, We are trying to create the external requirements in SRM using proxy <b>ExternalRequirement_Create_In</b>. We are populating the data from GIL(AS/400) and moving it to SRM via XI. The data is coming till SRM correctlety.But this is not creating t

  • Can Reports 3.0 run a host command?

    Can Reports 3.0 run a host command like in Forms 5? null

  • "Target will overwrite..." error in Compressor

    Here's the situation: I am trying to recompress a video using the MPEG-2 60min HQ preset. I drag both the DVD PCM Audio and MPEG-2 presets to the video in the job list. I've left the Target location as "Source" and hit submit. If I watch the folder w

  • Should an Apple Remote be Included with a Refurb MacBook?

    Last week, I purchased a refurb MacBook (FB061LL/B) for my mother-in-law from the Apple Store. The online description of the product and the manual both stated that the Apple Remote was included in the box. However, she couldn't find it despite a car