Can i call a function module of SAP?

Hi, i have a question... Can i call a function module of SAP... I need print a document from a device, can i call the function module of SAP in order that me it prints it?
Thanks,

Hi Victor,
you can use the GenericSync Example of the MDK. This calls the Module to verify the user directly. Generic Sync is exactly for that purpose: call a BADI directly and no usage of SyncBO. Be aware, that you - out of the box- sync your app data as well at that moment, because a sync runs both - generic and smartsync. Even worse: even when you have nothing to sync in Generic Sync - so nothing to print - it will call the function module for generic sync as long as it is registered.
Well, anyway, this is the way to call a function module separate.
If it works with you rparticular print module? I have no idea, but if this is a normal function module - well, it should be ok.
Hope this helps.
Regards,
Oliver

Similar Messages

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

Can one call a function module in Calculated Key Figure?

Can one call a function module in Calculated Key Figure? If yes how, if not, what is the solution if formula does not suffice?
I want to convert duration which is in seconds to Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
[Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
[Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

Can you call a function module from within a smartform?

I was told that yu can not call a function module from a smartform - that does not make sense to me because you can do tons of ABAP within a smartform.
Well - can you?
Thanks.
Scott

Yes, you can call function modules.

Can we call a Function Module with in a loop

Hi,
Can we call a Function Module within a loop . Does it reduces the performance.
Can you please guide regarding this.
With Best Regards
Mamatha.

hi Mamatha,
You can call .. but it is better to avoid calling it within a loop...
Loop at it_tab.
   call function 'CONVERSION_EXIT_ALPHA_INPUT'
    exporting
      input = it_tab-vbeln.
    importing
      output = it_tab-vbeln.
endloop.
Regards,
Santosh
Message was edited by:
        Santosh Kumar Patha

Calling a functional module in SAP

Hi
We have a require ment like we need to update the details in SAP by calling a functional module, the data comes from a legacy which deletes immediately after it sends to XI by using a webservice, It is XI responsibility to update the details. In case SAP is down , Can we preserve this message and update SAP as and when the SAP is Up.
Please comment.
Regs
Ramesh

Hi Prasad
Thank you so much. It has good information.
As Naveen Pandrangi's blog
XI : RFCAdapter ReConnect Issue
"when the end system comes up, calls from XI would be successful. RFC Adapter would now check the connection for every message instead of only once when the communication channel is updated."
Here small question is what about the old messages that were failed due to Connection Failure or SAP down.
Please try to comment.
Thanks in advance
Ramesh

Can we call a function module from a structure?

Hi everyone,
I have a requirement to send an idoc. I have to populate a segment with signing authority . I have to create a custom table for that and call the function module. How do i do that ?
Thanks in advance,
Venkat

Hi!
When you have an outbound IDOC, then there is a function module to create the IDOC and fill the segments. Often the function name follows the form MASTERIDOC_CREATE_NNN with NNN = IDOC-name.
Inside this function module should be an user exit to add some own coding.
Regards,
Christian

How can I call the function module of the ECC when I save the campaign?

HI Experts!
I want to call function module of the ECC when I click the save button in the campaign view,A badi or userexit is needed,but I don't find, can you tell me which badi or userexit is used to implement?

Thanks a lot.
I have tried,but it can't do.
who can tell me which badi and detailed implementation step?
waiting on line.

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
        Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
            begcol TYPE i DEFAULT 1 NO-DISPLAY,
            begrow TYPE i DEFAULT 1 NO-DISPLAY,
            endcol TYPE i DEFAULT 100 NO-DISPLAY,
            endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
       col LIKE alsmex_tabline-col,
       size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
      zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
        title(60),
        table(6),
        field(10),
        kz(1),
      END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
       value_0001(50),
       value_0002(50),
       value_0003(50),
       value_0004(50),
       value_0005(50),
       value_0006(50),
       value_0007(50),
       value_0008(50),
       value_0009(50),
       value_0010(50),
       value_0011(50),
       value_0012(50),
       value_0013(50),
       value_0014(50),
       value_0015(50),
       value_0016(50),
       value_0017(50),
       value_0018(50),
       value_0019(50),
       value_0020(50),
       value_0021(50),
       value_0022(50),
       value_0023(50),
       value_0024(50),
       value_0025(50),
       value_0026(50),
       value_0027(50),
       value_0028(50),
       value_0029(50),
       value_0030(50),
       value_0031(50),
       value_0032(50),
       value_0033(50),
       value_0034(50),
       value_0035(50),
       value_0036(50),
       value_0037(50),
       value_0038(50),
       value_0039(50),
       value_0040(50),
       value_0041(50),
       value_0042(50),
       value_0043(50),
       value_0044(50),
       value_0045(50),
       value_0046(50),
       value_0047(50),
       value_0048(50),
       value_0049(50),
       value_0050(50),
       value_0051(50),
       value_0052(50),
       value_0053(50),
       value_0054(50),
       value_0055(50),
       value_0056(50),
       value_0057(50),
       value_0058(50),
       value_0059(50),
       value_0060(50),
       value_0061(50),
       value_0062(50),
       value_0063(50),
       value_0064(50),
       value_0065(50),
       value_0066(50),
       value_0067(50),
       value_0068(50),
       value_0069(50),
       value_0070(50),
       value_0071(50),
       value_0072(50),
       value_0073(50),
       value_0074(50),
       value_0075(50),
       value_0076(50),
       value_0077(50),
       value_0078(50),
       value_0079(50),
       value_0080(50),
       value_0081(50),
       value_0082(50),
       value_0083(50),
       value_0084(50),
       value_0085(50),
       value_0086(50),
       value_0087(50),
       value_0088(50),
       value_0089(50),
       value_0090(50),
       value_0091(50),
       value_0092(50),
       value_0093(50),
       value_0094(50),
       value_0095(50),
       value_0096(50),
       value_0097(50),
       value_0098(50),
       value_0099(50),
       value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = '*.xls'
            static    = 'X'
       CHANGING
            file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = filename
            i_begin_col             = begcol
            i_begin_row             = begrow
            i_end_col               = endcol
            i_end_row               = endrow
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
    intern1 = intern.
    CLEAR intern1-row.
    APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
    AT NEW col.
      t_col-col = intern1-col.
      APPEND t_col.
    ENDAT.
    zwlen = strlen( intern1-value ).
    READ TABLE t_col WITH KEY col = intern1-col.
    IF sy-subrc EQ 0.
      IF zwlen > t_col-size.
        t_col-size = zwlen.
*                          Internal Table, Current Row Index
        MODIFY t_col INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
    LOOP AT intern.
      fieldnames-title = intern-value.
      APPEND fieldnames.
      AT END OF row.
        EXIT.
      ENDAT.
    ENDLOOP.
ELSE.
    DO zwlines TIMES.
      WRITE sy-index TO fieldnames-title.
      APPEND fieldnames.
    ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
    IF kzheader = 'X'
    AND intern-row = 1.
      CONTINUE.
    ENDIF.
    tind = intern-col.
    CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
    ASSIGN (zwfeld) TO <fs1>.
    <fs1> = intern-value.
    AT END OF row.
      APPEND data_tab.
      CLEAR data_tab.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
       EXPORTING
            file_name     = filename
       TABLES
            data_tab      = data_tab
            fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         col6(30) TYPE c,
         col7(30) TYPE c,
         col8(30) TYPE c,
         col9(30) TYPE c,
         col10(30) TYPE c,
         col11(30)    TYPE c,
       END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '1',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
               DEFAULT 'c:test.xls' OBLIGATORY.   " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
*    so_fpath-sign = 'I'.
*    so_fpath-option = 'EQ'.
*    append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5,
            wa_datatab-col6,
            wa_datatab-col7,
            wa_datatab-col8,
            wa_datatab-col9,
            wa_datatab-col10,
            wa_datatab-col11.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
*       upload excel spreadsheet into internal table
*      -->P_TABLE    Table to return excel data into
*      -->P_FILE     file name and path
*      -->P_SCOL     start column
*      -->P_SROW     start row
*      -->P_ECOL     end column
*      -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
*             Row number   | Colum Number   |   Value
*      i.e.     1                 1             Name1
*               2                 1             Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
*     MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.                    "UPLOAD_EXCEL_FILE
Regards
Pavan

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Calling a function module from APO Macro

Hi,
Can I call a function module from a macro directly without going through the user exit? If so, how should I pass the parameters to the function module? I don't have to get the results back to macro.
Regards

Hi Asokan - you can call a function module directly from a macro providing it is designed to be called from a macro. For example if you are in the Macrobuilder and use the menu path Edit -> Edit User Function then you will get a list of existing function modules that you can call directly by inserting a Operator/function into your macro. If you want to call a function module not listed in the User Function drop down list then you will either need the user exit or create a custom function module as a wrapper and register the wrapper function module in the Edit User Function menu path. Calling a function module will always return a value - but you can choose to ignore that value depending on how you build your macro.
Regards
Andy

Can we call function modules in SAP query or ADHOC query

Hi ,
Can we call afunction moudule in sap query or ADHOC query ?If yes How
An early responce is greatly appreciated
Thanks and best regards
Rajeev Chhabra

Hello Rajeev Chhabra,
Yes; you can call function module in SAP Query. In InfoSet definition (SQ02), you can create additional field. In this field definition, you can add code snippet where you can function module.
However, this is not possible in Quick Viewer (SQVI) Query.
Thanks,
Venu

Can we call function module in sap script

hi
can we call function module in sap script
i want to use function module HR_TMW_GET_EMPLOYEE_NAME in sapscript
to get Empname by using personal no
pernr no is coming from bseg-pernr table
so how i can use it .
please help me
thanks in advanced.

hi,
You can use like this:
PERFORM FUNCTION_MODULE IN PROGRAM SUBROUTINE_POOL
USING &FIELD1&
USING &FIELD2&
CHANGING &FIELD3&
ENDPERFORM.
where function_module is the func. module name defined in program SUBROUTINE_POOL , field1 n field2 are the fields to be passed, and field3 is the value which you want to display...
You have to read field1 & field2 in the pool, process them & get the value of field to be output.
Reward helpful answers.
Regards,
SIddhesh Sanghvi.

How can call a function module(RFC)in one server to another sever in my rep

How can call a function module(RFC)in one server to another sever in my report program.
What i am know whenever rfc enabled immediately radio button checks then only it will come.
please justify.

Syntax
CALL FUNCTION func DESTINATION dest [EXPORTING p1 = a1 p2 = a2 ...]
[IMPORTING p1 = a1 p2 = a2 ...]
[CHANGING p1 = a1 p2 = a2 ...]
[TABLES t1 = itab1 t2 = itab2 ...]
[EXCEPTIONS [exc1 = n1 exc2 = n2 ...]
[system_failure = ns [MESSAGE smess]]
[communication_failure = nc [MESSAGE cmess]]
[OTHERS = n_others]].
http://help.sap.com/saphelp_47x200/helpdata/en/22/042537488911d189490000e829fbbd/frameset.htm

Calling RFC function module in other SAP system...

Hi,
I have a report on one SAP system and a function module on other system. The function module is RFC enabled. How can I call this RFC enabled function module from other SAP system in the report which is different SAP ?
system.
Thanks.
Regards,
Rajesh.

call the function module in orginal system in se38 ,copy the function module ,paste the function module in other system,and maintain destination here ,otherwise you will get short dump.
here detination should be SM59 destination,this is case sensitive.
Reward Points if it is helpful
Thanks
Seshu

Can i call a function module of SAP?

Similar Messages

Maybe you are looking for