Can I call a specific time of the timeline in an advanced action?

Can I use the specific time of the time line to trigger an advance action? If I can what is the correct syntax to call the timeline information?
eg:
in a conditional advanced action
IF
Timeline - is equal to or greater than - 00:16
AND
Timeline - is less than or equal to - 00:20
ACTION
Show - Image 21
ELSE
Hide Image 21

Double post, see: Can you add Advanced actions to an image?
My list with system variables will not really help, I'm afraid. My suspicion (and yours in the other thread) is that the OP doesn't understand the design of the Timeline.

Similar Messages

How can I export a specific clip on the timeline?

Hey all
Ive got a specific (Compound) clip that I'd like to export as FCPX is really not handling it very well.
Its actually sped up 1000%, has a Bad TV effect and colour changed. Its actually making the rest of my footage go out of sync with the audio (I guess its just too much for my system to handle)
I cant simply V disable out all the rest of the clips below it (theyre mulitcam) as you cant
select all V
them (it just doesnt disable them all)
without going in and disabling each and every clip how can I just export my highlighted clip?
Thanks

Cmd-C to copy; create a new temporary project, paste into it and export.

IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me

iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?

Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

If you want a relevant answer you may have to elaborate on what you actually mean. Posting screenshots might help, too.
In any case multiple conversions of an image are not advisable in general.

How do you set a calendar alarm for a specific time on the day of the event without it being an all-day event

Does anyone know how to set a calendar alert at a specific time on the day of the event.
So that the alert date adjusts accordingly if you were to copy and past it to another date.
The custom alert function kind of does this, but because it is an absolute alert (not relative) it will still refer to the date you initially set it to when you copy and paste it to another date. So this creates more work where you would have to go and manually change all the custom alerts. I have potential
Anyone know how to set this kind of calendar alert?
Thanks in advance

Greetings: Set the alarm to message you (on your screen) and then snooze it every day for 15 days, or, set 15 separate alarm messages. There is probably an AppleScript somewhere on the web too, try searching that way as well.

How can I disable/enable specific cell on the matrix?

Hi,
Please help me, how can I disable/enable specific cell on the matrix?
Regards,
vinoth

Hi,
Do you want to control by sdk?
If yes, then you can use CommonSetting property.
Try this,
     Dim oMatrix As SAPbouiCOM.Matrix
           Dim oRowCtrl As SAPbouiCOM.CommonSetting
           oMatrix = frm_id.Items.Item("mat_id").Specific
           oRowCtrl = oMatrix.CommonSetting()
           oRowCtrl.SetCellEditable(1, 2, False)
Regards,
silambu

Anyway to loop specific parts of the timeline?

Hey, is there anyway to loop SPECIFIC parts of the time line, the way you can in Motion, Logic and some other audio programs. That would really be nice as you can make changes while you watch in REALTIME.
Thanks

I tried both. First i simply used "A" Seclect tool to highlight the part of the timeline that I want to loop. That didn't work. The cursor just continued after the highlighted part. Then I sued "R" range slection tool and selected part of the clip/s in the timeline and again, the cursor just continued after the end of the selection.
In logic and other programs, you can create a section on top of the timeline where you want the loop to be and it will loop from those points.
Any other ideas of what to do? Thanks again

Can you have multiple audio bits in the timeline?

I'd like to have multiple audio pieces in one slide. They would be text to speech parts but I want them to be independent in the timeline so I can place them at different times in the slide play or when a button is clicked for example. Is this possible?
I've tried multiple TTS items but they generate audio into 1 audio file in the timeline which is not what I want. If Captivate 6 doesn't have this ability I'm going to be really disappointed.

It is the same work flow IMO but you use a text caption whereas I prefer a highlight box for which I have a dedicated style. Think you find my blog post more complicated because I explained also how to control the audio using show/hide the object it is attached to. In your case you only use them for their timing functionality. In your original question you didn't speak about TTS... something I never use myself, prefer doing VO.
Lilybiri

I can't drag a video transition into the timeline...a small x appears near the cursor

I can't drag a video transition into the timeline...a small x appears near the cursor

Sounds like you don't have enough handles.
http://www.fcpbook.com/Effects1.html

Can I zoom in on a specific point on the timeline

There must be a way for me to zoom in on the timeline without losing my place everytime while doing so.
Is there a button I can press while zooming in that will keep the scrubbing point within my view of the timeline.
I really hope that made sense...
Patrick

patrickmbarker wrote:
what is the CTI?
Playhead.
CTI is what they used to call it: current time indicator.
If you hold alt and scroll with the mouse it will zoom in on the playhead.

My iPhone 5 gives a busy tone whenever someone calls the first time. The person has to call a second time for the ringtone to be heard? How o I tux this issue? I have a missed call every time and then a ringtone.

My iPhone 5 gives the caller a busy tone the first time when the phone is actually not in use. The caller has to make another call to get the ringtone. I will get the first call as missed with no ringtone and then the second time it will ring. What can be fond to solve this problem ?

Turn off Do Not Disturb.
http://support.apple.com/kb/HT5463?viewlocale=en_US&locale=en_US

How can i set a specific time for a transaction code to be run?

I want to know if a certain Transaction Code (not only the customized tcodes) could only be run on a specific time (ie. 4pm to 6am only)

There are two ways to achieve the purpose you wanted:
1. If the work to be done by this Tcode can be processed automatically without any interactive session (dialog user) then I would suggest it to process as Batch Job in the time period you specified. And make sure that none of the users are not having corresponding authorization to execute the same task in foreground.
2. If you need the Tcode to be executed only when you can monitor then the best way is to monitor the users containing the Tcode through SM20 audit log as a Mitigating control.
No such facility is currently available to protect a Tcode for a particular time interval in a day. You may write a message to SAP for suggestion.
regards,
Dipanjan

HT1515 Can you set allowable access times on the Airport Express?

Does the Airport Express allow you to set what times of the day it can be used to access the Internet?

At the same time as saying it is global it is also set to specific MAC addresses so it should not actually matter if the setting is global if you want to restrict a particular client. It just cannot apply to all guests wireless.

Can I remove a SPECIFIC file from the "Recents" list?

     As far as I can see, Adobe Reader for Android has only the option of clearing ALL the files in the "Recents" list. It doesn't have the option of removing a specific file from the "Recents" list.
     Maybe I'm just missing the option I'm talking about or Adobe Reader doesn't really have that feature.
     Sensible answers to my question will be greatly appreciated. Thanks!

Hi iSTULIN
I assume you can delete the complete list, not the single file ...
Please check the below link : http://blogs.adobe.com/readermobile/2011/09/09/faqs-for-adobe-reader-on-android/
You can raise a feature request on the below link : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How can I recover a project that I optimized? It will not work after the fact. Can I go back in time without the "time machine?"

I'm freaking out here. Ok, so I've spent an entire school year filming and editing a video for an afterschool program I work for. I finally completed the project but was having errors every time I tried to export the movie. I was advised to optimize all the video clips before exporting the movie so it won't be as much of a load on my computer during the export process. I did that but now files are missing, all the audio and video clips are not lined up correctly, and it won't allow me to edit anything. Also, I can't even play back the video anymore. When I press play, I see nothing and hear audio from a completely different project in my library! I was told to check in the "iMovie Original Movies" in the "Movies" section of my computer to recover the original, unoptimized movie file. But nothing is there. Now I'm stuck with a movie I can't do anything with and all the students are depending on this video being completed. I do not have a "Time Machine" backup, which I'm regretting now more than ever right now. Does anyone have any suggestions that could help me??? I'm desperate.

All I can think of at the moment is to use the old standby of deleting the preference file. This can often fix problems with iMovie.
Go to your Home folder <your user name>/Library/Preferences (NOT the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key on the keyboard - the Library folder will appear in the drop down list. Slide the pointer down to Library and, as you release the pointer, the folder will open in Finder. Now you can navigate to the Preferences folder.
In your user Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (this happens in the background as iMovie is loading).
If iMovie now opens and appears to be working properly, you can change the default settings in the menu item "IMovie > Preferences", as desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm any existing Events or Projects.
Note that these instructions are for iMovie '11 (the latest version being 9.0.9). For users on earlier versions of iMovie, the preference file has a different but similar name. For example, for iMovie '09 (that's version 8.0.6) the file is named "com.apple.iMovie8.plist". Earlier versions may or may not have a number in the name, for example, "com.apple.iMovie.plist".
John

Can I call a specific time of the timeline in an advanced action?

Similar Messages

Maybe you are looking for