Can I call timelines across movieclips

I have buttons in my main menu which load a movie and disable
then re-enable when another button is pressed. Each button is
actual a movieclip with a button embedded in it, then the mc is
placed on the main timeline. I used global variables as indicators
for the buttons to disable and enable. Here's some code I used on
any one button;
on (release) {
if (_global.ButtonActiveArray[4] == false) {
return;
} else {
gotoAndPlay(21);
for (i=0; i<7; i++) {
if (_global.ButtonActiveArray
== false) {
_root.button.gotoAndPlay(11);
_global.ButtonActiveArray[0] = true;
_global.ButtonActiveArray[1] = true;
_global.ButtonActiveArray[2] = true;
_global.ButtonActiveArray[3] = true;
_global.ButtonActiveArray[5] = true;
_global.ButtonActiveArray[6] = true;
_global.ButtonActiveArray[4] = false;
loadMovieNum("fashion-page.swf", 2);
What's happening is when a button is disabled, its sent to
frame 21 where is changes colour. When is re-enabled, it's still at
21. So you have to rollOver it to get it back to it's active
colour. I tried _root.button
.gotoAndPlay(11) to send it to another frame but this doesn't
work. Where am I going wrong?

Similar Messages

How can I call AM from another page

Hi,
I have come across a situation which I am not sure how to solve it. Here is the issue. I have a custom requirement to add another page to an already existing custom page. The first page used to hold the data and commit buttons however because of requirements, we want users to add some comments on the second page and then save the data. In other words the save button is now suppose to move to the second page.
The dilemma I have is that the method that used to be called from the PFR CO of Page 1 was linked to page 1 AM which had that commit method.
I still want to re-use the method from the Page 1 AM since there is a lot of logic involved. How can I call that method while I am in my second page from my CO?
I am using setForwardURL and I am retaining AM from page 1.
Also, if this is not feasible what are other alternatives. Any ideas would be appreciated.
Edited by: user501998 on Jan 7, 2010 12:21 AM

Hi,
Can you give me an example? I mean do I just call the AM like in the example below...in my PFR...of Page 2 Controller. I thought this would be giving me an error method not found or something since it would be looking at the AM of my current page. I will try it and see but if there is another syntax can you please provide it.
Thanks
Partial code from PFR of Page 2
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if(eventName.equals("save"))
if ( respName.endsWith("Admin") )
am.invokeMethod("commitTransaction"); --- This is the AM Method in Page 1...
} else
throw new OAException("Shipper successfully updated.", OAException.CONFIRMATION);

Can BPM maintain flow across different applications

Hello,
I have a requirement where I have to maintain the business flow across different applications(Siebel CRM, Oracle Financials and third party applications) with out the end user knowing.
Is it possible with BPM to navigate users from one application to another application (CRM Application-> Third party Application -> Financials)? If there is a solution availabe with BPM or a different application please provide the same doc. Appreciate your help.
Regards,
Jay

Hi,
Yes. Oracle BPM can maintain a flow across multiple applications without the end user knowing. It is something it was built to do.
First, applications like the ones you mentioned have an API (typically web service today but older applications exposed their API as Java POJOs, EJBs, COM, etc.). For Oracle BPM to access the applications, you need to expose the API in Oracle BPM's catalog. Customers that have a service bus expose the application APIs in the service bus and then Oracle BPM catalogs the service bus proxy services. Customers that do not have a service bus can expose the application APIs directly in Oracle BPM's catalog. Either way will work.
Second, you'd design a process with a series of Interactive (human activities) and Automatic (activities that invoke the components that in turn invoke the APIs for your applications without human intervention). You'd add something called instance variables that carry the information throughout the life the process for each work item instance. Interactive activities are placed into roles with a name associated with them (e.g. CSR or Manager) so the work done in each activity is done by the right type of person. Interactive activities can be set up where the work item instance goes to a specific person instead of everyone in the role where the activity is located (e.g. send the instance to the CSR that talked to the customer last time).
Third, at runtime as each work item instance is created (e.g. "Order 227") in the process the work item instance flows to one of the process's Interactive or Automatic activities. If it flows into an Interactive (human) activity, the end user assigned to the role where the activity is located clicks on an item in their web based Oracle BPM WorkSpace's inbox for the specific work item instance that they are interested in working on (again - perhaps "Order 227"). Once clicked by the end user, a UI presentation (either built using Oracle BPM's WYSIWYG presentation editor or a JSP) shows the work that needs to be done specifically by that end user. The UI presentation is already populated with the information gathered from a database or a previous API call from an Automatic activity. All this is done without end users having to cut out of one application and then paste into another application's screen - the right contextual information is sent to the right person at the right time. Once the end user finishes their manual task, the work might flow to an Automatic task that invokes another applicaiton's API automatically from the logic and variable information gathered in earlier activities in the process.
All this is done without the end users knowing that they are flowing through multiple applications to get their work done.
Hope this helps,
Dan

HT4245 facetime for mac I can hear caller but my mike is locked on mute and grayed out

facetime for mac I can hear caller but my mike is locked on mute and grayed out. I am on mountain lion 10.8

Double-click the Home button to display recently used apps.
Flick from left to right along the bottom of the screen.
Tap the Mute button on the bottom left of the screen.
A slash will appear across the Mute button:

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

How can i call another view variables in another view

how can i call another view variables in another view and pass that variables to the function
my situation is i have a view FAC which i need to pass par_id_fac TO THE VIEW AGR.AFTER THAT i what to take start_dt in agr view and par_id_fac from Fac and pass this variables to the function i have check the documentation but does not do what i what,the doc simply talk about creating variables and pass then to function.i what to pass variables from the views and return value to my contractno Variables value
something like if :agr.contract_no is null
and :agr.agr_start_dt is not null then
     :agr.contract_no := sms_fapp.get_contract_no(:fac.par_id_fac,:agr.agr_start_dt);
end if;
y view is
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="AGR"
Version="11.1.2.60.81"
BindingStyle="OracleName"
CustomQuery="true"
PageIterMode="Full"
UseGlueCode="false"
RowClass="sms1405.AGRRowImpl"
ComponentClass="sms1405.AGRImpl"
DefClass="sms1405.AGRDefImpl">
<DesignTime>
    <Attr Name="_isExpertMode" Value="true"/>
    <Attr Name="_codeGenFlag2" Value="Access|Def|Coll|Prog|VarAccess"/>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<SQLQuery><![CDATA[SELECT SmsAgreements.ID,
       SmsAgreements.FAPP_ID,
       SmsAgreements.PAR_ID,
       SmsAgreements.SSCH_ID,
       SmsAgreements.COSERV_ID,
       SmsAgreements.IREA_ID_TERMINATED,
       SmsAgreements.IREA_ID_SUSPENDED,
       SmsAgreements.SPTYP_ID,
       SmsAgreements.CLAIM_BASED_YN,
       SmsAgreements.NOTES,
       SmsAgreements.SUSPENSION_DT,
       SmsAgreements.TERMINATION_DT,
       SmsAgreements.SPECIAL_PROJECT_END_DT,
       SmsAgreements.CAPITAL_FUNDING_APPROVED,
       SmsAgreements.PERIODICAL_PAYMENT_AMOUNT,
       SmsAgreements.DATE_CREATED,
       SmsAgreements.DATE_MODIFIED,
       SmsAgreements.MODIFIED_BY,
       SmsAgreements.CREATED_BY,
       SmsAgreements.CONTRACT_NO,
       SmsAgreements.OFF_ID,
       SmsAgreements.DATE_APPROVED,
       SmsAgreements.AGR_START_DT,
       SmsAgreements.AGR_END_DT,
       SmsAgreements.MONTHS_FUNDED,
       SmsAgreements.PFRE_ANNUAL_FREQUENCY,
       SmsAgreements.FUNDED_NO,
       SmsAgreements.REGISTERED_NO,
       SmsAgreements.CONTRACT_NAME,
       SmsAgreements.OPEX_ALLOCATION,
       SmsAgreements.EMERG_ORG_YN,
       SmsAgreements.SCHEDULE,
       SmsAgreements.PERIODICAL_PAYMENT_AVERAGE,
       SmsAgreements.NO_OF_PAYMENTS,
       SmsAgreements.ADVANCE_PAYMENT_PERCENT,
       SmsAgreements.QUALIFY_NO,
       SmsAgreements.ENROLLED_NO,
       SmsAgreements.MULTI_YEAR_ALLOCATION,
       SmsAgreements.AGR_ID_SOURCE,
       SmsAgreements.FYEA_YEAR_ACTIVE,
       SmsAgreements.PTYPE_CODE,
       SmsAgreements.CONTRACT_VALUE,
       SmsAgreements.MAGR_ID,
       SmsAgreements.PROG_ID,
       SmsAgreements.EMERGENCY_BED_#,
       SmsAgreements.drep_id,
       SmsAgreements.srep_id,
       (select name from sms_offices off where off.id = SmsAgreements.off_id)officeName,
       (SELECT PROG.NAME FROM   sms_programmes prog where PROG.ID = SMSAGREEMENTS.PROG_ID)programe,
       (select prog.code || '.' || bvspro.code || ' ' || bvspro.NAME budget_vote   from sms_subsidy_schemes ssch,
          sms_budget_vote_sub_programs bvspro,
          sms_programmes prog
          WHERE bvspro_id = bvspro.ID AND prog.ID = prog_id
          and prog.id = SMSAGREEMENTS.PROG_ID)Sub_programme,
         (select ssch.NAME from sms_subsidy_schemes ssch where SSCH.ID = SMSAGREEMENTS.SSCH_ID)subsidy,
       (SELECT master_contract FROM sms_master_agreements magr WHERE MAGR.ID = SmsAgreements.magr_id)masterContract
FROM SMS_AGREEMENTS SmsAgreements]]></SQLQuery>
<ViewAttribute
    Name="ContractNo"
    IsPersistent="false"
    IsNotNull="true"
    PrecisionRule="true"
    Precision="20"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="CONTRACT_NO"
    SQLType="VARCHAR">
    <TransientExpression><![CDATA[CONTRACT_NO]]></TransientExpression>
    <DesignTime>
      <Attr Name="_DisplaySize" Value="20"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="AgrStartDt"
    IsPersistent="false"
    PrecisionRule="true"
    Type="java.sql.Timestamp"
    ColumnType="DATE"
    AliasName="AGR_START_DT"
    SQLType="DATE">
    <RecalcCondition><![CDATA[true]]></RecalcCondition>
    <TransientExpression><![CDATA[adf.currentDate]]></TransientExpression>
</ViewAttribute>
</ViewObject>and my FAC view is
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="FAC"
Version="11.1.2.60.81"
BindingStyle="OracleName"
CustomQuery="true"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
    <Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<SQLQuery><![CDATA[SELECT SmsFacilityVw.PAR_ID_ORG,
       SmsFacilityVw.ORGANISATION,
       SmsFacilityVw.ORG_KEY,
       SmsFacilityVw.C_CODE,
       SmsFacilityVw.FACILITY,
       SmsFacilityVw.PAR_ID_FAC,
       SmsFacilityVw.NPO_REGISTRATION_NO,
       SmsFacilityVw.ADDRESS,
       SmsFacilityVw.TELNR_WORK,
       SmsFacilityVw.ADDRESSLINE,
       SmsFacilityVw.Town,
       SmsFacilityVw.Suburb,
       SmsFacilityVw.PostalCode,
       SmsFacilityVw.DSD_REGION,
       SmsFacilityVw.SERVICE_DELIVERY_AREA,
       SmsFacilityVw.FAXNR,
       SmsFacilityVw.EMAIL,
       SmsFacilityVw.PAR_TYPE_DEF
FROM SMS_FACILITY_VW SmsFacilityVw]]></SQLQuery>
<ViewAttribute
    Name="ParIdOrg"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="38"
    Scale="0"
    Type="java.math.BigInteger"
    ColumnType="NUMBER"
    AliasName="PAR_ID_ORG"
    Expression="PAR_ID_ORG"
    SQLType="NUMERIC"/>
<ViewAttribute
    Name="Organisation"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="100"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="ORGANISATION"
    Expression="ORGANISATION"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="100"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="OrgKey"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="10"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="ORG_KEY"
    Expression="ORG_KEY"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="10"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="CCode"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="30"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="C_CODE"
    Expression="C_CODE"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="30"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Facility"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="100"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="FACILITY"
    Expression="FACILITY"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="100"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="ParIdFac"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="38"
    Scale="0"
    Type="java.math.BigInteger"
    ColumnType="NUMBER"
    AliasName="PAR_ID_FAC"
    Expression="PAR_ID_FAC"
    SQLType="NUMERIC"/>
<ViewAttribute
    Name="NpoRegistrationNo"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="30"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="NPO_REGISTRATION_NO"
    Expression="NPO_REGISTRATION_NO"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="30"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Address"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="227"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="ADDRESS"
    Expression="ADDRESS"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="227"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="TelnrWork"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="150"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="TELNR_WORK"
    Expression="TELNR_WORK"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="150"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Addressline"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="120"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="ADDRESSLINE"
    Expression="ADDRESSLINE"
    SQLType="VARCHAR"
    IsUpdateable="false">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="120"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Town"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="60"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="TOWN"
    Expression="TOWN"
    SQLType="VARCHAR"
    IsUpdateable="false">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="60"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Suburb"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="60"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="SUBURB"
    Expression="SUBURB"
    SQLType="VARCHAR"
    IsUpdateable="false">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="60"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Postalcode"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="4"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="POSTALCODE"
    Expression="POSTALCODE"
    SQLType="VARCHAR"
    IsUpdateable="false">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="4"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="DsdRegion"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="40"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="DSD_REGION"
    Expression="DSD_REGION"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="40"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="ServiceDeliveryArea"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="50"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="SERVICE_DELIVERY_AREA"
    Expression="SERVICE_DELIVERY_AREA"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="50"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Faxnr"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="50"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="FAXNR"
    Expression="FAXNR"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="50"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="Email"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="80"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="EMAIL"
    Expression="EMAIL"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="80"/>
    </DesignTime>
</ViewAttribute>
<ViewAttribute
    Name="ParTypeDef"
    IsUpdateable="false"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="12"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="PAR_TYPE_DEF"
    Expression="PAR_TYPE_DEF"
    SQLType="VARCHAR">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="12"/>
    </DesignTime>
</ViewAttribute>
<ViewLinkAccessor
    Name="AGR"
    ViewLink="sms1405.par_facfkViewLink"
    Type="oracle.jbo.RowIterator"
    IsUpdateable="false"/>
<ViewLinkAccessor
    Name="SmsParAddrVwView"
    ViewLink="sms1405.parLink"
    Type="oracle.jbo.RowIterator"
    IsUpdateable="false"/>
<ViewLinkAccessor
    Name="DOC"
    ViewLink="sms1405.FAC_DOC"
    Type="oracle.jbo.RowIterator"
    IsUpdateable="false"/>
</ViewObject>Edited by: ADF007 on 2012/08/23 6:10 PM

i try this
public class SMS_AGREEMENTSImpl extends EntityImpl {
RowSet newContractNoBeforePost = null;
    public static int NUMBER = Types.NUMERIC;
    public static int DATE = Types.DATE;
    public static int VARCHAR2 = Types.VARCHAR;
protected Object callStoredFunction(int sqlReturnType, String stmt,
        Object[] bindVars) {
        CallableStatement st = null;
        try {
        // 1. Create a JDBC CallabledStatement
        st = getDBTransaction().createCallableStatement(
        "begin ? := "+stmt+";end;",0);
        // 2. Register the first bind variable for the return value
        st.registerOutParameter(1, sqlReturnType);
        if (bindVars != null) {
        // 3. Loop over values for the bind variables passed in, if any
        for (int z = 0; z < bindVars.length; z++) {
        // 4. Set the value of user-supplied bind vars in the stmt
        st.setObject(z + 2, bindVars[z]);
        // 5. Set the value of user-supplied bind vars in the stmt
        st.executeUpdate();
        // 6. Return the value of the first bind variable
        return st.getObject(1);
        catch (SQLException e) {
        throw new JboException(e);
        finally {
        if (st != null) {
        try {
        // 7. Close the statement
        st.close();
        catch (SQLException e) {}
    protected void doDML(int operation, TransactionEvent e) {
       String amDef = "sms1405.sms1405Module";
       String config = "sms1405ModuleShared";
          String NewContract = null;
        ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
        ViewObjectImpl vo = (ViewObjectImpl) am.findViewObject("AGR1");
        vo.executeQuery();
        Row row = vo.first();
        // NewContract = (String)vo
        NewContract = (String)row.getAttribute("ContractNo");
        SMS_AGREEMENTSImpl newcont = new SMS_AGREEMENTSImpl();
       //AGRRowImpl res = new AGRRowImpl();
       // NewContract = NewContractNo();
        if (operation == 1) {
                     newcont.setContractNo(NewContractNo());
                     //res.setContractNo( NewContractNo());
                    //NewContractNo();
        super.doDML(operation, e);
        public void postChanges(TransactionEvent TransactionEvent) {
        /* Only bother to update references if contractno is a NEW one */
        if (getPostState() == STATUS_NEW) {
        * Get a rowset of contract related
        * to this new partyaddress before calling super
         newContractNoBeforePost = (RowSet)getSMS_AGREEMENTS();
        super.postChanges(TransactionEvent);
    public Date getAgrStartDt() {
        return (Date)getAttributeInternal(AGRSTARTDT);
     * Sets <code>value</code> as the attribute value for AgrStartDt.
     * @param value value to set the AgrStartDt
    public void setAgrStartDt(Date value) {
        setAttributeInternal(AGRSTARTDT, value);
    public String NewContractNo() {
           String amDef = "sms1405.sms1405Module";
           String config = "sms1405ModuleShared";
           String NewContract = null;
           ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
           ViewObjectImpl vo = (ViewObjectImpl) am.findViewObject("FAC1");
           // vo.setWhereClause("ParIdFac = 38844");
            vo.executeQuery();
            Row row = vo.first();
           Integer par_id = null;
           //oracle.jbo.domain.Date today = new oracle.jbo.domain.Date(oracle.jbo.domain.Date.getCurrentDate());
           oracle.jbo.domain.Date today = new oracle.jbo.domain.Date();
           //FACRowImpl res = new FACRowImpl();
           //res.setParIdFac(par_id);
           par_id = (Integer)row.getAttribute("ParIdFac");
           today = this.getAgrStartDt();
       return (String)callStoredFunction(VARCHAR2,
       "sms_fapp.get_contract_no(?,?)",
       new Object[]{par_id,today});
}at the moment am geting this error
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
     at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:415)
     at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:477)
     at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.reportException(JUCtrlActionBinding.java:2007)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1659)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
     at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
     at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
     at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
     at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:118)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.NullPointerException
     at oracle.jbo.server.EntityImpl.getEntityCache(EntityImpl.java:4665)
     at oracle.jbo.server.EntityImpl.saveEventOrigTransAttrVals(EntityImpl.java:729)
     at oracle.jbo.server.EntityImpl.saveEventOrigAttrVals(EntityImpl.java:719)
     at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:1935)
     at sms1405.SMS_AGREEMENTSImpl.setContractNo(SMS_AGREEMENTSImpl.java:998)
     at sms1405.SMS_AGREEMENTSImpl.doDML(SMS_AGREEMENTSImpl.java:1628)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6751)
     at sms1405.SMS_AGREEMENTSImpl.postChanges(SMS_AGREEMENTSImpl.java:1645)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
     at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
     at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
     ... 43 more
## Detail 0 ##
java.lang.NullPointerException
     at oracle.jbo.server.EntityImpl.getEntityCache(EntityImpl.java:4665)
     at oracle.jbo.server.EntityImpl.saveEventOrigTransAttrVals(EntityImpl.java:729)
     at oracle.jbo.server.EntityImpl.saveEventOrigAttrVals(EntityImpl.java:719)
     at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:1935)
     at sms1405.SMS_AGREEMENTSImpl.setContractNo(SMS_AGREEMENTSImpl.java:998)
     at sms1405.SMS_AGREEMENTSImpl.doDML(SMS_AGREEMENTSImpl.java:1628)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6751)
     at sms1405.SMS_AGREEMENTSImpl.postChanges(SMS_AGREEMENTSImpl.java:1645)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
     at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
     at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
     at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
     at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
     at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
     at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:118)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

I can send calls from Mac but incoming calls do not show up on Mac.

Just downloaded Yosemite 10.10 on 10-21-14. I can make calls on my mac but unable to receive calls on my Mac. No notifications for incoming calls on my mac. Everything else runs fine. Messaging and calls from my mac works fine. I am running IOS 8.1 on a iPhone 4s. I have a 2009 Macbook Pro 2.54 duo with 8 gb of ram.

There is no Adobe printer in recent versions of Mac OS. Look instead for a Save As Adobe PDF pull down.

Can't call out on PSTN after ethernet adapter failure in J4W

Hi all
Okay here goes.
We are currently deploying new laptops in our business. It's the brand new Lenovo X1 Carbon 2nd G. together with a USB based docking station. Unfortunately there is a very annoying bug with the docking station. The problem is that the dock ethernet NIC, suddenly disappears from time to time in Windows. This means that Jabber for Windows is failing over to the Wi-Fi network. This should be okay, but we are seeing an issue with J4W, when the ethernet NIC disappear.
The problem is that J4W can't call out to external phone numbers/PSTN, but all internal calls are working fine. Also it's possible to call from an external number/PSTN to the J4W client. But still, the J4W client can't call an external no. You will only hear a busy tone when trying to make an external call.
It doesn't help restarting the J4W client, we have to reboot the entire computer to make the client be able to call external numbers over Wi-Fi. Meaning that the ethernet NIC on the docking station, isn't reappearing after a reboot of the laptop. To make it reappear, we have to disconnect and connect the docking station cable.
Atm. we are waiting for a fix from Lenovo, but in the meantime I can't understand why we can't call external no. when the ethernet NIC fails. I mean, we can call external numbers. over Wi-Fi, but not when the ethernet NIC are failing.
Can anyone point me into the correct direction here?
Specs:
CUCM: 8.6.2.22900-9
CUP: 8.6.4.13900-4
J4W: 9.7
Gateway: Cisco 2911
OS: Windows 7 32 bit.

Hello Taxi-Anne,
Welcome to the forums.
Try following the steps below to turn off the call forwarding:
1. Touch Phone.
2. Swipe down from the top of the screen.
3. Touch the Settings icon.
4. Touch Call Forwarding.
5. Touch the required option (e.g., Forward If Busy).
6. Touch Save.
Let us know if this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I can make calls and send text messages on my new iPhone 5, but incoming calls and texts still go to my old (non-Apple) phone. Is this a problem with the phone set up, or is it a problem with my old carrier or my new carrier?

I can make calls and send texts on my new iPhone 5, but all incoming calls and texts are received by my old (non-Apple) phone.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Can't call or chat with Verizon because I can't use my cell (Account, not technical problem)

Dear all,
So I am living in Ireland right now. NOT using my Verizon account at all. (Phone still active, still paying, but using a European cell here.) In the meantime, I need to make a change to my nephew's account, which I pay for on mine. (He got a new carrier on his own a month or so ago and I need to cancel his line.) If I dial any of the numbers for customer service from a land line or from my cell here, it says to hang up and use my cell phone. And I can't do that! I don't have it activated for global services because I'm not using it. Then on top of that, the chat online function seems to be blocked in Ireland. It won't work on any computer I try.
So here I am, I can't call Verizon. I can't chat with Verizon. I can't find an e-mail address. And in the meantime, for the last month I am paying for a phone that isn't being used. Because I can't figure out any way to actually get Verizon to talk to me!! I've tried googling numbers, etc., etc. The 1-800-922-0204 number says I'm not calling from a Verizon cell and hangs up on me. The 908-559-4899 number behaves exactly the same. I tried the Global services number, but they said it's for technical support only, no customer help.
Help????
Thanks,
Jill

@JillianTH
I'm so sorry to hear of the trouble you're experiencing with reaching one of our Customer Support representatives! Here's a link to our Global Support Contact Us page: http://vz.to/YXAFHw. There's instructions included for using the Global Support Calling Card on this page. This will allow you to reach one of our Global Support Team members and they can assist you with making any changes to your account. Have a wonderful day and stay in Ireland!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

How can I call my chart in Forms6i on When Button Press Trigger?

Hi Friends,
I have make a chart in Graphic Builder 6i and save on path C:\graph\test.ogd
Now I want to run this Chart from Form6i on When Button Press trigger.
I have call my report in forms using this command on When Button Press trigger.
Run_Product(reports,'C:\Cheema\Qdir_store\reports\pmms\sec_backlog',asynchronous,runtime,filesystem,TO_CHAR(NULL));
So tell me How can I call my chart in Forms6i?
Please reply me on urgent.
Thanks,
Shahzad

Just to recall after a long break of couple of years..... Pls check out if not wrong.
First of all you need to embeed the chart object on your layout window and make it visible = FALSE. This is a design time work. In the button press event, show the chart object by setting the visible property = TRUE.
Note, i could not paste u the sample code as i don't have forms installation on my PC. The above states is a logic you can apply.

How do I remove them from my itunes account as authorized accounts for my new macbook iphone and ipad to use? I CANNOT access them can i call you? also if i have an old itunes account on another email

help 4 of my authorized computers crashed or are gone how do I remove them from my itunes account as authorized accounts for my new macbook iphone and ipad to use? I CANNOT access them can i call you?
also if i have an old itunes account on another email can i transfer those songs i still have access to both emails?
thank you

De-authorise all, then authorise the one you still have.

How many times can i call the start()

Hi All:
I would like to know how many time you can actually call the start(),
cuz my app is doing some really strange things,
here is a fragament of my code:
private void spawnThreads()
ListIterator it = _vWorker.listIterator();
while ( it.hasNext() ) {
ClientWorker client_worker = (ClientWorker) it.next();
client_worker.start();
ClientWorker is another Thread, and in the run() of the ClientWorker, I have
public void run() {
Runtime rt = Runtime.getRuntime();
     try {
     // Start the timer
     Process child = rt.exec(_fileName);
     // gobble any error or output streams
StreamGobbler errorGobbler = new
StreamGobbler(child.getErrorStream(), "ERROR");
StreamGobbler outputGobbler = new
StreamGobbler(child.getInputStream(), "OUTPUT");
errorGobbler.start();
outputGobbler.start();
child.waitFor();
                                        } catch (IOException e) {
               System.err.println("IOException starting process!");
          } catch (InterruptedException e) {
               System.err.println("Interrupted waiting for process!");
I have a couple of cmd files to execute, so This spawnThreads() will be called a couple of times,and the funny thing is , it will execute the first cmd files, and that is it, it won't execute the 2nd or the 3rd cmd files, it will start the thread, but then the run()won't actually gets invoked,,,so I am just wondering if anyone of you has encountered this problem, perhaps you could lend me some insight on this?
thanks,

Yes, you can run the start() of a Thread more than once,
here is my Test App,
public static void main(String[] args) throws Exception {
Vector vec = new Vector();
for (int i=0;i<4;i++){
ClientThread ct = new ClientThread();
vec.add(ct);
ListIterator it = vec.listIterator();
while(it.hasNext()){
ClientThread ct = (ClientThread)it.next();
ct.start();
and as you have already guessed it the run() of ClientThread simply does system.out.println()
and here is the output
run started
run started
run started
run started
so..yeah..I don't really have any idea what is happening to my app and why it is not executing any cmd files after executing the very first cmd file

Can I call a .htm page of view1 from another .htm page of view 2?

Hi,
I have a viewset QuestionnaireTabVS with a view area TABS which has two views QuestionCondnsVS (default) and View QuestionRisksVS.
When a variable say GV_TAB is set as 'Questions' it navigates to the QuestionCondnsVS view and when the variable GV_TAB is set as 'Risks' it navigates to the QuestionnaireRisksVS.
This view set QuestionnaireTabVS is contained in an overview page which has two Radiobuttons. It works fine when the first radiobutton is selected, i.e, when I click on the Questions it renders the QuestionCondnsVS view and when I click on the Risks it renders me the QuestionRisksVS view .
Problem is when I had clicked the RISK tab first and then selected the another radiobutton the rendered view QuestionRisksVS doesnt get removed
but is present there by default which I dont want.I want the QuestionCondnsVS view to be present there by default after the second radiobutton is selected. I tried to refresh all the controllers but somehow it navigates to the QuestionRisksVS only .
So i thought to call the .htm page of QuestionCondnsVS forcefully from the QuestionnaireTabVS .htm page as soon as I select the another radiobutton.
Can I call a .htm page of QuestionCondnsVS from another .htm page of QuestionnaireTabVS? If yes then how or any other suggestion is welcome

Hi Dharmakasi,
The Radiobuttons code is not added in the same HTML page but lies in a different component where the coding is on event handler.
METHOD eh_onchecked.
DATA: lv_option TYPE REF TO if_bol_bo_property_access,
        lv_check TYPE char1.
lv_option ?= typed_context->switch->collection_wrapper->get_current( ).
lv_check = lv_option->get_property_as_string( iv_attr_name = 'OPTION'   ).
IF lv_check EQ zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_old.
    zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_old.
ELSEIF lv_check EQ zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_new.
    zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_new.
ELSEIF lv_check EQ zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_scaf.
    zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_scaf.
    ELSEIF lv_check EQ zcl_gaf_adm_toolbox=>gv_matrix_mnt_scaf_anz.
    zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_scaf_anz.
ELSEIF lv_check EQ zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_sow.
    zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_sow.
ENDIF.
ENDMETHOD.
Here the LV_CHECK = old is the first radiobutton whereas LV_CHECk = new is the second radiobutton. I have tried to set the value of gv_tab ='Question' here but again no success.
The .HTM coding of QuestionanireTABVS is
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<% data: ls_line                type CRMT_THTMLB_LINK,
         lv_flag                type ABAP_BOOL.
    data: lv_xml                type string.
if zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_old.
   REFRESH controller->gt_navlink_tab[].
*   if controller->gt_navlink_tab[] is initial.
     ls_line-id = 'Questions'.
     ls_line-onclick = 'QUEST'.
     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/QUESTIONS' ).
     insert ls_line into table controller->gt_navlink_tab.
     ls_line-id = 'Risks'.
     ls_line-onclick = 'RISK'.
     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/GLOBAL_RISK' ).
     insert ls_line into table controller->gt_navlink_tab.
     %>
<%--   endif. %>--%>
<thtmlb:tray id     = "HeaderExt"
             indent = 'FALSE'
             design = 'STANDARD'>
<thtmlb:trayHeader>
    <thtmlb:grid cellSpacing = "0"
             columnSize = "1"
             height      = "100%"
             rowSize     = "1"
             width       = "100%" >
      <thtmlb:gridCell colSpan     = "1"
                   columnIndex = "1"
                   rowIndex    = "1"
                   rowSpan     = "1"
                   >
        <thtmlb:navLink links = "<%= controller->gt_navlink_tab %>"
                selectedLinkId = "<%= controller->gv_tab %>" />
    <bsp:call comp_id = "<%= controller->GET_VIEWAREA_CONTENT_ID( 'TABS' ) %>"
              url     = "<%= controller->GET_VIEWAREA_CONTENT_URL( 'TABS' ) %>" />
      </thtmlb:gridCell>
    </thtmlb:grid>
</thtmlb:trayHeader>
<thtmlb:trayBody>
    <%
*    data: lv_xml    type string.
    lv_xml    = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
    %>
    <chtmlb:config xml     = "<%= lv_xml %>"
                   mode    = "RUNTIME" />
</thtmlb:trayBody>
</thtmlb:tray>
<% elseif zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_type_new.
   REFRESH controller->gt_navlink_tab[].
*   if controller->gt_navlink_tab[] is initial.
     ls_line-id = 'Questions'.
     ls_line-onclick = 'QUEST'.
     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/QUESTIONS' ).
     insert ls_line into table controller->gt_navlink_tab.
*     ls_line-id = 'Risks'.
*     ls_line-onclick = 'RISK'.
*     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/GLOBAL_RISK' ).
*     insert ls_line into table controller->gt_navlink_tab.
     %>
<%--   endif. %>--%>
<thtmlb:tray id     = "HeaderExt"
             indent = 'FALSE'
             design = 'STANDARD'>
<thtmlb:trayHeader>
    <thtmlb:grid cellSpacing = "0"
             columnSize = "1"
             height      = "100%"
             rowSize     = "1"
             width       = "100%" >
      <thtmlb:gridCell colSpan     = "1"
                   columnIndex = "1"
                   rowIndex    = "1"
                   rowSpan     = "1"
                   >
        <thtmlb:navLink links = "<%= controller->gt_navlink_tab %>"
                selectedLinkId = "<%= controller->gv_tab %>" />
    <bsp:call comp_id = "<%= controller->GET_VIEWAREA_CONTENT_ID( 'TABS' ) %>"
              url     = "<%= controller->GET_VIEWAREA_CONTENT_URL( 'TABS' ) %>" />
      </thtmlb:gridCell>
    </thtmlb:grid>
</thtmlb:trayHeader>
<thtmlb:trayBody>
    <%
*    data: lv_xml    type string.
    lv_xml    = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
    %>
    <chtmlb:config xml     = "<%= lv_xml %>"
                   mode    = "RUNTIME" />
</thtmlb:trayBody>
</thtmlb:tray>
<% elseif zcl_gaf_adm_toolbox=>gv_matrix_mnt_type EQ zcl_gaf_adm_toolbox=>GV_MATRIX_MNT_TYPE_SCAF or
          zcl_gaf_adm_toolbox=>gv_matrix_mnt_type = zcl_gaf_adm_toolbox=>gv_matrix_mnt_scaf_anz or
          zcl_gaf_adm_toolbox=>gv_matrix_mnt_type EQ zcl_gaf_adm_toolbox=>GV_MATRIX_MNT_TYPE_SOW.
   REFRESH controller->gt_navlink_tab[].
*   if controller->gt_navlink_tab[] is initial.
     ls_line-id = 'Questions'.
     ls_line-onclick = 'QUEST'.
     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/QUESTIONS' ).
     insert ls_line into table controller->gt_navlink_tab.
*     ls_line-id = 'Risks'.
*     ls_line-onclick = 'RISK'.
*     ls_line-text = page->otr_trim( 'ZGAF_CRM_70/GLOBAL_RISK' ).
*     insert ls_line into table controller->gt_navlink_tab.
     %>
<%--   endif. %>--%>
<thtmlb:tray id     = "HeaderExt"
             indent = 'FALSE'
             design = 'STANDARD'>
<thtmlb:trayHeader>
    <thtmlb:grid cellSpacing = "0"
             columnSize = "1"
             height      = "100%"
             rowSize     = "1"
             width       = "100%" >
      <thtmlb:gridCell colSpan     = "1"
                   columnIndex = "1"
                   rowIndex    = "1"
                   rowSpan     = "1"
                   >
        <thtmlb:navLink links = "<%= controller->gt_navlink_tab %>"
                selectedLinkId = "<%= controller->gv_tab %>" />
    <bsp:call comp_id = "<%= controller->GET_VIEWAREA_CONTENT_ID( 'TABS' ) %>"
              url     = "<%= controller->GET_VIEWAREA_CONTENT_URL( 'TABS' ) %>" />
      </thtmlb:gridCell>
    </thtmlb:grid>
</thtmlb:trayHeader>
<thtmlb:trayBody>
    <%
*    data: lv_xml    type string.
    lv_xml    = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
    %>
    <chtmlb:config xml     = "<%= lv_xml %>"
                   mode    = "RUNTIME" />
</thtmlb:trayBody>
</thtmlb:tray>
<% endif.
%>

Can I call timelines across movieclips

Similar Messages

Maybe you are looking for