Can i call to another phone using IP phone?is it possible?

actually i want to know that, IP phone is used to communicate to only IP phones?
or it is used to call to ordinary phones?is it possible?

If configured properly, IP phones can send/receive calls from other IP phones or analogue phones (aka POTS). IP Phones can send/receive calls from mobile phones too.

Similar Messages

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

HT204387 Can i connect to another ipad using bluetooth?

Can i connect to another ipad using bluetooth?

Depending on what you want to do, the answer may be yes, or no.
If you explain what it is you want to accomplish we may be able to provide a more accurate answer.
Just now that the iPad does not support file transfer over bluetooth directly. Though there are some Apps in the App store that make this possible over different mediums.

How can i make a signature by using lightroom? , is it possible?

how can i make a signature by using lightroom? , is it possible?

To can create a text identity plate in LR but to create a graphical version
requires Photoshop

If you forward your calls to another phone and turn off yours, can the phone be tracked?

I have an iphone 5 and I want it not to be tracked but still get my calls. If I cal forward my calls to another iphone and turn off the one I dont want tracked, will it render it untrackable?

If you are seeing your device on iCloud's Find my IPhone section (even if it says offline), then it is tied to your iCloud Account, meaning you had that "Find My iPad" turned on in the iPad's Settings > iCloud.
If someone has it, they probably turned it off to prevent you from tracking it, but yes, you can use lost mode to lock up the iPad and put a message and phone number to call if found. If or when the device is turned back on, this message will be displayed on the iPad. iCloud: Use Lost Mode
Choosing the play sound option will put it in the system to play the sound when it is turned on again.

Forwarding Call To Another Phone After X Rings

I have a 7940 phone where the end user wants the phone calls to that phone to be forwarded to another phone after 3 rings on the first phone. Is this possible, and if it is how do you go about configuring this situation in Call Manager. I have Call Manager 6.1 running.

hai marw,
one of my end user requirment is like this,
if somebody calling to pilot number and that extension is 500.500 picks the call, and he wants talk to 501 .
but the 501 guy not in seat...my question is
if the 500 extension can able to transfer the
the call to 501's moblie number by pressing transfer button...if it is possible give me the solution
NOTE:call forward is not enable in 501's ip phone.
thanks

How can I call a web service using JAVAscript in LCD

hi guys,
I know it can call a WSDL in LCD, but I have not any WSDL web service , and I have a REST web service ,how can I call this REST web service in LCD? I checked some documents and found nothing...if it's possible that it can call a REST web service using JAVAScript code, I mean I can program some code to call this web service ?
thanks,
Jesse

Hi Jesse,
You can do GET, PUT and POST using FormCalc, so you should be able to access a REST web service.
There is a example of accessing a RSS feed in this thread, http://forums.adobe.com/message/5695433#5695433
Regards
Bruce

How can we call the method of used controller?

Hi All,
   i created two WDA Applications.( like YWDA1,YWDA2 ) . i am using the component WDA2 in WDA 1.and displaying the one view of WDA2 as popup window in WDA1 on action of one of the input element in the view of WDA1 by using the method l_window_manager->create_window_for_cmp_usage
I have a button on the view of WDA2 which has appear in the popup window...how can i call the method which has binded to that button....and where should i code that...and i need to assign selected value in the popup window to input elemetn of view WDA1
Please help me to resolve this....
Regards,
Ravi

You can not directly call view's event handler from other component.
create a method in component controller of the second component and in the button click call the component controller method. ( also make the method as interface so that you can call it from other components )
Now, you can call the interfacecontroller's method
DATA: l_ref_INTERFACECONTROLLER TYPE REF TO ZIWCI__VSTX_REBATE_REQ_WD .
l_ref_INTERFACECONTROLLER =   wd_This->wd_CpIfc_<comp usage name>( ).
l_ref_INTERFACECONTROLLER->Save_Rr(
    STATUS = '01'                       " Zvstxrrstatus
save_rr is the method of second component controller

How can i call a DLL file using invoke node from labview?

I cant call a DDL function using call library function.so plz tell me how to use invoke node and call DLL using invoke node
Please Mark the solution as accepted if your problem is solved and donate kudoes

Please stay in the same thread.
- Cheers, Ed

I got one India toll free number starting 1800 can I call to that number using my Skype account

I got one India toll free number starting 1800 . Is it possible for me to make call to that number using my Skype account ?

If it does not work, I do not believe it is supported. According to the Skype FAQ only these countries are currently supported (with no timeline for other countries): https://support.skype.com/en/faq/FA24 Viewing the Pay as you go rates for India, India toll-free is not listed while other countries that are supported are listed. IndiaCalling - per minute 1excl. VATIndia1.5¢India - Ahmedabad1.5¢India - Bangalore1.5¢India - Hyderabad1.5¢India - Madras1.5¢India - Mobile1.5¢India - New Delhi1.5¢ FranceCalling - per minute 1excl. VATFrance22.3¢France - 089135¢France - 089245¢France - 089345.5¢France - Mobile4¢France - Paris22.3¢France - Shared Cost22¢France - Toll Free30¢

Can I call a mac laptop using my iPhone 5? For free?

I'm away on holiday soon and want to use FaceTime to call a mac laptop. How do I do this? And is it free?

Welcome to the Apple Support Communities
Without any problem. To be able to call a Mac, this computer must have the FaceTime app, included with OS X Lion and Mountain Lion, and available for Snow Leopard in the Mac App Store.
Calls work in the same way as you do to call to other iPhones, iPods touch and iPads with FaceTime, but select an email address instead of a phone number (I'm not sure if you can use a phone number to call to a Mac with OS X Mountain Lion). FaceTime is completely free, unless you aren't connected to a Wi-Fi network on the iPhone; in this case, you may be calling using your carrier's network, and you may have to pay

Can i call the another form's event in runtime

hi,
i am using forms 9i. when i click the o.k button i want to call the procedure of other files..
anybody help me
Regards,
S.Arulmani

ok, run the forms parallel. that means, open the forms with open_form ('B').
then you can switch from one form to another with go_form ('B')
before you go to a different form save a hint in a global-variable. e.g.
:GLOBAL.TODO_ACTION := 'RUN_BUTTON_B1'then you can write a WHEN-WINDOW-ACTIVATED in form B and code this :
DEFAULT_VALUE (NULL, 'GLOBAL.TODO_ACTION');
IF :GLOBAL.TODO_ACTION = 'RUN_BUTTON_B1' THEN
b1_event;
ELSIF ...
.. do something
ELSE
END IF;the WHEN-BUTTON-PRESSED on Button B1 starts the same procedure :
BEGIN
b1_event;
END;try it
Gerd

HT3819 I can use remote on my iPhone to connect with my iTunes library, but i can't connect to another computer using home sharing to access apple tv. I have used the same access ID and password that is used for the apple tv.

I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house. I am using the same ID and password that the apple tv uses to connect with the other computer. Also how do I check what version of IOS that my iphone is using?

Version:
iOS Settings>General About (or it'll say when you hook it up to iTunes)
Are all the devices on the same physical network? I think you're saying all are set up using the same home sharing credentials.
If you've not done so restart all devices and your router.
If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
Does the other computer have any firewall or port blocking software running?

How can I call functions in packages using flash builder?

a new guy in flash developnet, I need to find out a way to import multiple packages into frames and call functions. I know how to import packages, but an error occurs error 1120 : access of undefined property. How can ı solve them?
Is there any easy way to add Mediapomise object to the stage form the package? "addChild(loader);" does not work? or ı do not know whether it works or not, ı could not see the photo that ı took from camerauı object in android.
thank you

I need to find out a way to import multiple packages into frames
Usually, no matter where you use any classes of any package, the imports happen always in the beginning.
If you have a specific problem with flashbuilder you should post in this forum:
http://forums.adobe.com/community/flash_builder

Why can't I launch another app using a URL scheme in a web clip set up through Configurator with the "full screen app" option selected?

My company uses web clips on iOS devices, set up through profiles on Configurator, for EVERYTHING. Most of these web clips have a transfer function on the site that allows the user to bring up other apps, like directions to a destination in Google Maps for instance (a URL scheme.) If the option for the web clip to appear as a "full screen app" is selected in Configurator (or iPhone Configuration Utility), this fuction does not work on devices that are running iOS 7. It is imparative to our company that the web clips be full page so there is no address bar, back button, etc. for the users to access. With this feature not working, I have 50+ iOS devices that are usless to us.
iOS 6 Device --> Configurator 1.3 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> Configurator 1.4 --> Full Screen Web Clip --> WORKS
iOS 6 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.3 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.4 --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> DOESN'T WORK
iOS 7 Device --> Configurator 1.3 --> NOT Full Screen Web Clip --> WORKS
iOS 7 Device --> Configurator 1.4 --> NOT Full Screen Web Clip--> WORKS
iOS 7 Device --> iPhone Configuration Utility --> NOT Full Screen Web Clip --> WORKS
Somebody, please help!

Phil, I have been trying to figure out a solution to this problem since iOS 7 came out. In hindsight, I should have downloaded the beta versions of the iOS so I would have had even more time. I have talked with quite a few different developers and up until today it was a consensus that this was a "feature" of iOS in an attempt by Apple to diminish the use of webapps. Now most of these people wouldn't be considered apple apologists by any stretch, which could have contributed to their pessimism. That being said, today I finally received some news that could give us a glimmer of hope. I spent almost 2 hours on the phone today being sent "up the ladder" until I think I found the right person to help (I'm not complaining; I was surprised at how competent and helpful each person that I spoke with was, and I didn't have to explain the situation over and over again.) I think what took so long finding the right person to speak with was that this isn't an issue that any type of troubleshooting would fix. It's not an iPad, iPhone, or even an Apple Configurator issue; it's actually a bug in iOS 7. Anyways, the senior engineer that I spoke with reassured me, very adamantly, that this was not a feature of the new operating system and most definitely a bug. He said that they take webapps very seriously and are actually looking for ways to improve how webapps work on iOS devices and how they are used with Mobile Device Management software, like Configurator. I was a little concerned that he said this was the first he or anyone on his team has heard about this problem, but he did work extensively with me today and said that it looks to be a major issue, and something that he and his team are going to try to figure out as soon as possible. He said he would be calling me by Tuesday with information on how and when this will be fixed. Jon

Can i call to another phone using IP phone?is it possible?

Similar Messages

Maybe you are looking for