Can I capture USP traffic with NI-SPY

11-14-07
Can I capture USB traffic with NI-Spy? if so how?
Thanks
TeBlues

Hi TeBlues,
NI-Spy captures return a log of low-level driver calls being made to National Instruments drivers. It does not track the serial data passed along the USB bus. To capture the serial traffic on the USB bus, I would recommend Portmon (if you are using a Windows OS). This program monitors all serial and parallel port activity on a system.
Donovan

Similar Messages

Can I capture a picture with my ipad, and save it as a PNG and/or SVG file to a specific folder?

Can I capture a picture with my ipad, and save it as a PNG and/or SVG file to a specific folder?

Kind of, sort of. (You can't save as SVG, but you can export as PNG.) PS Touch projects themselves are self-contained UNTIL they are exported, and even then they'll get exported to a specific location. (e.g., To the Camera Roll or Gallery/Photos, to Creatve Cloud, etc.)
The procedure would be to start a new project using the "add image" icon (looks like a landscape with a plus sign, in the lower right in the project selection user interface) > Camera. Take your picture, then PS Touch will bring you to the editing user interface. Edit your image as appropriate.
Go back out to the project selection user interface by tapping the back arrow in the upper left to save. You can then export the project using the export icon (5th icon from the upper right).

Can you capture an image with Zenworks already installed?

I remember seeing somewhere on this site where you can install Zenworks on your base imaging machine, then capture that image and deploy the image to other devices, but the key is, you have to do some command on your machine you are capturing an image of to stop some kind of conflict from happening with GUID's, etc.
What is that command please?

Motc7,
> I remember seeing somewhere on this site where you can install Zenworks
> on your base imaging machine, then capture that image and deploy the
> image to other devices, but the key is, you have to do some command on
> your machine you are capturing an image of to stop some kind of conflict
> from happening with GUID's, etc.
>
> What is that command please?
>
You need to unregister the machine, zac unr
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Nexus1000v local SPAN can't capture inbound traffic

hi all,
I just configured local SPAN on nexus1000v (version 1.3d).
local SPAN source and destination is on same VEM.
my config is like below:
monitor session 3
source interface Vethernet13 both
destination interface Vethernet170
destination interface Vethernet36
no shut
SPAN session is up.
But we can't see any inbound traffic to the source VM.
(10.16.185.4,5,6 is the IPs of SPAN source)
[root@davidzhangRHEL ~]# tcpdump -i eth1
tcpdump: WARNING: eth1: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
11:46:07.644551 IP 10.16.185.3.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=sta                                                ndby group=1 addr=10.16.185.1
11:46:07.654771 IP 10.16.185.2.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=act                                                ive group=1 addr=10.16.185.1
11:46:07.961735 IP 10.16.185.6.https > 10.16.184.196.50254: S 3897896960:3897896                                                960(0) ack 1838046824 win 8192 <mss 1460,nop,wscale 8,sackOK,timestamp 74329579                                                 2654766205>
11:46:07.962955 IP 10.16.185.6.https > 10.16.184.196.50254: R 1:1(0) ack 2 win 0
11:46:10.644950 IP 10.16.185.3.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=sta                                                ndby group=1 addr=10.16.185.1
11:46:10.657615 IP 10.16.185.2.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=act                                                ive group=1 addr=10.16.185.1
11:46:11.081231 IP 10.16.185.5.https > 10.16.184.197.58538: S 1850399261:1850399                                                261(0) ack 3055844595 win 8192 <mss 1460,nop,wscale 8,sackOK,timestamp 74329891                                                 2654662655>
11:46:11.081970 IP 10.16.185.5.https > 10.16.184.197.58538: R 1:1(0) ack 2 win 0
11:46:11.957381 IP 10.16.185.5.https > 10.16.184.196.42161: S 1862096740:1862096                                                740(0) ack 970410175 win 8192 <mss 1460,nop,wscale 8,sackOK,timestamp 74329978 2                                                654770202>
11:46:11.958705 IP 10.16.185.5.https > 10.16.184.196.42161: R 1:1(0) ack 2 win 0
11:46:12.089401 IP 10.16.185.6.https > 10.16.184.197.45604: S 2733719434:2733719                                                434(0) ack 3290215780 win 8192 <mss 1460,nop,wscale 8,sackOK,timestamp 74329992                                                 2654663683>
11:46:12.090735 IP 10.16.185.6.https > 10.16.184.197.45604: R 1:1(0) ack 2 win 0
11:46:12.956018 IP 10.16.185.6.https > 10.16.184.196.50302: S 2275642708:2275642                                                708(0) ack 3286673454 win 8192 <mss 1460,nop,wscale 8,sackOK,timestamp 74330078                                                 2654771200>
11:46:12.956838 IP 10.16.185.6.https > 10.16.184.196.50302: R 1:1(0) ack 2 win 0
11:46:13.552716 IP 10.16.185.4.61913 > 10.2.222.111.5723: P 3867141198:386714222                                                3(1025) ack 4146771556 win 508
11:46:13.645770 IP 10.16.185.3.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=sta                                                ndby group=1 addr=10.16.185.1
11:46:13.654427 IP 10.16.185.2.hsrp > 224.0.0.2.hsrp: HSRPv0-hello 20: state=act                                                ive group=1 addr=10.16.185.1
11:46:13.817143 IP 10.16.185.4.61913 > 10.2.222.111.5723: . ack 180 win 508
1000v# module vem 12 execute vemcmd show span
VEM SOURCE IP NOT CONFIGURED.
HW SSN ID            DST LTL/IP ERSPAN ID HDR VER
        0                    68      local
1000v# show monitor internal errors
1) Event:E_DEBUG, length:96, at 163774 usecs after Thu Sep 22 15:12:17 2011
    [102] eth_span_phy_if_init_runtime_info(1051): im_get_ifindex_span_mode_list returned 0x40e30005
2) Event:E_DEBUG, length:96, at 684704 usecs after Thu Sep 22 15:12:04 2011
    [102] eth_span_phy_if_init_runtime_info(1051): im_get_ifindex_span_mode_list returned 0x40e30005
anybody any suggestion. Your help is highly appreciated.

Hi Michael,
Thanks. You are correct. We are able to see outbound traffic from SPAN source but not inbound traffic to SPAN source.
Note: I have done vmotion for the SPAN source and SPAN destination virtual machines.
Please see the below output which you requested.
1000v# show monitor session 1
   session 1
type              : local
state             : up
source intf       :
    rx            : Veth13
    tx            : Veth13
    both          : Veth13
source VLANs      :
    rx            :
    tx            :
    both          :
filter VLANs      : filter not specified
destination ports : Veth170   Veth36
1000v#
show monitor internal info session 1
Session 1 info:
FSM state: SESSION_STATE_OPER_ACTIVE
State reason: 0
*** ADMIN DATA ***
Session state: NO SHUT
Ingress sources
phy if: Veth13
port ch:
vlans:
Egress sources
phy if: Veth13
port ch:
vlans:
Destinations:
Veth170, Veth36
PSS source list:
Veth13
PSS destination list:
Veth170, Veth36
*** RUNTIME DATA ***
hw_ssn_id: 0
destination index: 0x4fa3 (multicast di)
oper rx: Veth13
oper tx: Veth13
oper dest: Veth170, Veth36
oper dest for di: Veth170, Veth36
programmed rx: Veth13
programmed tx: Veth13
programmed dest: Veth170, Veth36
programmed dest for di: Veth170, Veth36
programmed filter rx:1500
programmed filter tx:
Lock Info: resource [Session ID(0x1)]
type[0] p_gwrap[(nil)]
      FREE @ 97236 usecs after Sun Sep 25 12:14:25 2011
type[1] p_gwrap[(nil)]
      FREE @ 580143 usecs after Tue Sep 27 01:53:06 2011
type[2] p_gwrap[(nil)]
      FREE @ 520203 usecs after Sun Sep 25 12:48:23 2011
0x1
Use lock event history for more details
1000v# terminal length 0
1000v# show monitor internal info interface vethernet 13
Interface info:
if_index: 1c0000c0
source for ssn 1, src_dir 3
state: up
layer: 2
mode: access
Access vlan: 1500
Interface is not in switchport monitor mode
No Entries in SDB for if_index 0x1c0000c0
1000v# show monitor internal info interface vethernet 36
Interface info:
if_index: 1c000230
destination for ssn 1
state: up
layer: 2
mode: access
Access vlan: 1500
Interface is not in switchport monitor mode
The port is MISCONFIGURED, being not span destination but used as such
No Entries in SDB for if_index 0x1c000230
1000v# show monitor internal info interface vethernet 170
Interface info:
if_index: 1c000a90
destination for ssn 1
state: up
layer: 2
mode: access
Access vlan: 1500
Interface is not in switchport monitor mode
The port is MISCONFIGURED, being not span destination but used as such
No Entries in SDB for if_index 0x1c000a90
1000v# show interface virtual | egrep "(13|36|170)"
Veth13      Net Adapter 1 VM451             11 esx905
Veth36      Net Adapter 4 VM510             11 esx905
Veth113     Net Adapter 2 VM808             12 esx902
Veth130     Net Adapter 1 VMSDE449          12 esx902
Veth131     Net Adapter 3 VM809             10 esx904
Veth132     Net Adapter 2 VMSDE449          12 esx902
Veth134     Net Adapter 2 VM510             11 esx905
Veth135     Net Adapter 2 VM511             8   esx901
Veth136     Net Adapter 2 VM465             9   esx903
Veth137     Net Adapter 1 VM472             11 esx905
Veth138     Net Adapter 3 VM470             10 esx904
Veth139     Net Adapter 3 VM472             11 esx905
Veth151     Net Adapter 1 VMSDE436          11 esx905
Veth152     Net Adapter 2 VMSDE436          11 esx905
Veth170     Net Adapter 2 RHEL5             11 esx905
1000v# module vem 11 execute vemcmd show port
LTL    IfIndex   Vlan    Bndl SG_ID Pinned_SGID Type Admin State CBL Mode   Name
    8          0   3969       0     32          32 VIRT     UP    UP    4 Access
    9          0   3969       0     32          32 VIRT     UP    UP    4 Access
   10          0   1513       0     32           7 VIRT     UP    UP    4 Access
   11          0   3968       0     32          32 VIRT     UP    UP    4 Access
   12          0   1514       0     32           8 VIRT     UP    UP    4 Access
   13          0      1       0     32          32 VIRT     UP    UP    0 Access
   14          0   3971       0     32          32 VIRT     UP    UP    4 Access
   15          0   3971       0     32          32 VIRT     UP    UP    4 Access
   16   1a0a0000   1600 T   307      0          32 PHYS     UP    UP    4 Trunk vmnic0
   18   1a0a0200    616 T   306      2          32 PHYS     UP    UP    4 Trunk vmnic2
   19   1a0a0300      1 T   305      3          32 PHYS     UP    UP    1 Trunk vmnic3
   20   1a0a0400      1 T   305      4          32 PHYS     UP    UP    1 Trunk vmnic4
   21   1a0a0500   1600 T   307      5          32 PHYS     UP    UP    4 Trunk vmnic5
   23   1a0a0700      1 T   304      7          32 PHYS     UP    UP    1 Trunk vmnic7
   24   1a0a0800      1 T   304      8          32 PHYS     UP    UP    1 Trunk vmnic8
   25   1a0a0900    616 T   306      9          32 PHYS     UP    UP    4 Trunk vmnic9
   48   1b0a0000   1500       0     32           3 VIRT     UP    UP    4 Access VM510 ethernet3
   49   1b0a0010    620       0     32           9 VIRT     UP    UP    4 Access VM510 ethernet2
        pvlan isolated 616 620
   50   1b0a0020   1500       0     32           4 VIRT     UP    UP    4 Access VM510 ethernet1
   51   1b0a0030   1620       0     32           0 VIRT     UP    UP    4 Access VM480 ethernet2
        pvlan isolated 1600 1620
   52   1b0a0040    620       0     32           2 VIRT     UP    UP    4 Access VM480 ethernet1
        pvlan isolated 616 620
   53   1b0a0050   1502       0     32           3 VIRT     UP    UP    4 Access VM480 ethernet0
   54   1b0a0060   1509       0     32           4 VIRT     UP    UP    4 Access fiserv-f5 ethernet2
   55   1b0a0070    620       0     32           9 VIRT     UP    UP    4 Access fiserv-f5 ethernet1
        pvlan isolated 616 620
   56   1b0a0080   1512       0     32           7 VIRT     UP    UP    4 Access fiserv-f5.eth0
   57   1b0a0090   1620       0     32           5 VIRT     UP    UP    4 Access VM459 ethernet2
        pvlan isolated 1600 1620
   58   1b0a00a0    620       0     32           2 VIRT     UP    UP    4 Access VM459 ethernet1
        pvlan isolated 616 620
   59   1b0a00b0   1501       0     32           3 VIRT     UP    UP    4 Access VM459 ethernet0
   60   1b0a00c0    620       0     32           2 VIRT     UP    UP    4 Access VM476 ethernet2
        pvlan isolated 616 620
   61   1b0a00d0   1501       0     32           4 VIRT     UP    UP    4 Access VM476 ethernet1
   62   1b0a00e0   1620       0     32           0 VIRT     UP    UP    4 Access VM476 ethernet0
        pvlan isolated 1600 1620
   63   1b0a00f0    620       0     32           2 VIRT     UP    UP    4 Access VM451 ethernet3
        pvlan isolated 616 620
   64   1b0a0100   1620       0     32           5 VIRT     UP    UP    4 Access VM451 ethernet2
        pvlan isolated 1600 1620
   65   1b0a0110   1500       0     32           3 VIRT     UP    UP    4 Access VM451 ethernet0
   66   1b0a0120   1620       0     32           0 VIRT     UP    UP    4 Access VMSDE440 ethernet1
        pvlan isolated 1600 1620
   67   1b0a0130   1508       0     32           4 VIRT     UP    UP    4 Access VMSDE440 ethernet0
   68   1b0a0140   1509       0     32           3 VIRT     UP    UP    4 Access VM501 ethernet0
   72   1b0a0180   1620       0     32           0 VIRT     UP    UP    4 Access VMSDE436 ethernet1
        pvlan isolated 1600 1620
   73   1b0a0190   1508       0     32           3 VIRT     UP    UP    4 Access VMSDE436 ethernet0
   74   1b0a01a0    620       0     32           2 VIRT     UP    UP    4 Access VM477 ethernet3
        pvlan isolated 616 620
   75   1b0a01b0   1620       0     32           5 VIRT     UP    UP    4 Access VM477 ethernet1
        pvlan isolated 1600 1620
   76   1b0a01c0   1501       0     32           3 VIRT     UP    UP    4 Access VM477 ethernet0
   77   1b0a01d0   1620       0     32           0 VIRT     UP    UP    4 Access VMSDE434 ethernet1
        pvlan isolated 1600 1620
   78   1b0a01e0   1508       0     32           4 VIRT     UP    UP    4 Access VMSDE434 ethernet0
   79   1b0a01f0   1620       0     32           5 VIRT     UP    UP    4 Access VM454 ethernet3
        pvlan isolated 1600 1620
   80   1b0a0200    620       0     32           9 VIRT     UP    UP    4 Access VM454 ethernet2
        pvlan isolated 616 620
   81   1b0a0210   1501       0     32           4 VIRT     UP    UP    4 Access VM454 ethernet0
   82   1b0a0220   1620       0     32           0 VIRT     UP    UP    4 Access VM815 ethernet1
        pvlan isolated 1600 1620
   83   1b0a0230   1507       0     32           3 VIRT     UP    UP    4 Access VM815 ethernet0
   87   1b0a0270   1620       0     32           0 VIRT     UP    UP    4 Access VMSDE405 ethernet1
        pvlan isolated 1600 1620
   88   1b0a0280   1509       0     32           3 VIRT     UP    UP    4 Access VMSDE405 ethernet0
   89   1b0a0290   1620       0     32           5 VIRT     UP    UP    4 Access VMSDE424 ethernet1
        pvlan isolated 1600 1620
   90   1b0a02a0   1509       0     32           3 VIRT     UP    UP    4 Access VMSDE424 ethernet0
   91   1b0a02b0    620       0     32           9 VIRT     UP    UP    4 Access VM472 ethernet2
        pvlan isolated 616 620
   92   1b0a02c0   1620       0     32           0 VIRT     UP    UP    4 Access VM472 ethernet1
        pvlan isolated 1600 1620
   93   1b0a02d0   1500       0     32           4 VIRT     UP    UP    4 Access VM472 ethernet0
   94   1b0a02e0   1508       0     32           4 VIRT     UP    UP    4 Access VMSDE431 ethernet1
   95   1b0a02f0   1620       0     32           5 VIRT     UP    UP    4 Access VMSDE431 ethernet0
        pvlan isolated 1600 1620
   96   1b0a0300   1620       0     32           0 VIRT     UP    UP    4 Access VM496 ethernet2
        pvlan isolated 1600 1620
   97   1b0a0310   1501       0     32           3 VIRT     UP    UP    4 Access VM496 ethernet1
   98   1b0a0320   1500       0     32           4 VIRT     UP    UP    4 Access VM496 ethernet0
   99   1b0a0330   1620       0     32           5 VIRT     UP    UP    4 Access VM510 ethernet0
        pvlan isolated 1600 1620
100   1b0a0340   1500       0     32           4 VIRT     UP    UP    4 Access RHEL5 ethernet1
101   1b0a0350   1512       0     32           8 VIRT     UP    UP    4 Access RHEL5.eth0
102   1b0a0360   1620       0     32           0 VIRT     UP    UP    4 Access VM452 ethernet3
        pvlan isolated 1600 1620
103   1b0a0370    620       0     32           2 VIRT     UP    UP    4 Access VM452 ethernet2
        pvlan isolated 616 620
104   1b0a0380   1500       0     32           3 VIRT     UP    UP    4 Access VM452 ethernet0
304   16000028      1 T     0     32          32 VIRT     UP    UP    1 Trunk
305   16000029      1 T     0     32          32 VIRT     UP    UP    1 Trunk
306   1600002a    616 T     0     32          32 VIRT     UP    UP    4 Trunk
307   1600002b   1600 T     0     32          32 VIRT     UP    UP    4 Trunk
1000v# module vem 11 execute vemcmd show span
VEM SOURCE IP NOT CONFIGURED.
HW SSN ID            DST LTL/IP ERSPAN ID HDR VER
        0                  4408      local
1000v#

Can you capture while shooting with canon XL2 in fcp on Macbook pro

Is there a way to capture or record directly onto macbook pro hd thru final cut pro, or thru log and capture window while shooting with Canon XL2.
If yes, how, please!
Thanks,
Zia

As usual, Jim is correct. There's a reasonable possibility that something could go wrong with the capture; without a tape backup you would be hosed.
Here's what I do for live multi-camera recording (it works as well for single camera setups):
• Connect all cameras to a video switcher/DVE
• Connect the switcher's output to a DVCam VTR
• Connect all audio sources to an audio mixer
• Connect the audio mixer's output to the same DVCam VTR
• Connect the DVCam's Firewire output to my Mac
With this set up I can switch/mix live between cameras while recording to the VTR and simultaneously to the Mac in FCP.
Not only do I end up with the live mix recorded to tape and captured in FCP, I also run 'safety' tapes in each camera for additional backup in case the TD (me) makes an error.
-DH

I can't capture HDV footage with my macbookpro

I'm using FCP5 and the Sony Z1. What can I do? what I need to do?
FCP don't recognize the camera
Message was edited by: Perro

Hi Perro,
Try telling us all exactly what methods you are performing that is causing you the inability to capture. System specs, capture settings, logging methods, deck connection, etc. Tell us what you are doing and someone might be able to tell what you're doing wrong. This isn't 20 questions here...
Also try a Google search for FCP capture Sony Z1 there's a lot of information out there.

How can I capture a frame with a dpi of 300 or more?

I took a HD video and edited it in Premiere Elements 12. I want to lift out some frames to submit as still shots for a magazine article. They need resolution of 300 dpi or higher. The only function I found in Premiere Elements was "freeze frame" which saves/exports a frame as a .bmp with a resolution of 72. Anyone know how to save it with higher resolution? (FYI, I also have Photoshop Elements 12.)

expressiveglass
One way....
1. Video on Video Track 1 of your HD project, with Timeline Indicator on frame for Freeze Frame
a. Tools Menu/Freeze Frame.
b. In Freeze Frame dialog, check mark next to "Edit in Photoshop Elements after inserting" and check mark next to "Insert in movie".
c. Hit "Insert in movie" button.
d. When Photoshop Elements 12 opens, the Image Menu/Resize/Image Size.
e. In the Image Size dialog, change the Resolution to 300 pixels per inch
f. File Menu/Save As to jpg file.
To get back to Premiere Elements 12, in Photoshop Elements 12 Editor, File Menu/Exit.
Does that work for you?
ATR

How can we captured Excise Duty Payable at the time of billing

Hi,
i have created billing at that time i did not take excise duty payable and i have made the document and my question is and how can we captured excise payable with out reverse or manual JV,and i heard that we can do through excise table can any body tell me the procedure
Regards,
Harish

Dear,
have you created Excise Invoice? If not then you can create through J1IIN.
Br,Vivek

Trying to capture SIP traffic via a Network Protocol Analyzer

Hello
I am trying to use WireShark to capture n/w traffic.
Im running my OCMS instance on 127.0.0.1:5060, and am able to see the SIP msgs in the traffic.log and system.log files.
However, the same doesnt show up in the protocol analyzer as a registered interface.
Hence, is it possible to capture this traffic on the loopback IP?
Furthermore, I changed my OCMS instance to my ethernet IP, since WireShark listens to it.
However, I see that only SIP msgs sent from another box are recorded. Hence, if 2 clients talk on the same machine, the sip msgs r not registered. Why should that be the case?
Message was edited by:
A.J.

Hi A.J,
There is no way to capture any packages in a loopback. This is a limitation of Windows OS.
And you can't capture network traffic within the same machine (or network interface)
Regards,
Juan

Can I use iphone 4 with tomtom traffic?

I want to be able to connect wirelessly to my TomTom 720 to use their Traffic Service. I have managed to connect using Bluetooth and have managed to make a handsfree call, however I can't get the Traffic Service to work.
The TomTom website says that none of the Apple phones are compatable with their system, even though hundreds of other brand mobiles are. Do Apple plan to allow these services to be used, or do I need to buy an HTC?
Is there an app that will enable this?
Is there some other kind of work around?

Tom59 wrote:
do I need to buy an HTC?
If you want to do that, yes.
Is there an app that will enable this?
Nope.
Is there some other kind of work around?
Nope.

Can not capture with CS6 and blackmagic multibridge pro on HP Z820

This is the setup:
Z820 and Windows 7 pro
Multibridge Pro and driver 9.7.7
CS6.0.5
In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
On the same PC I CAN capture with Media Composer v7 and BM Media Express.
I've tried several version of the BM driver, no changes.
The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
Anyone having the same experience?
Regards
Danny

Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
Video cars is a NVIDIA Quadro K4000.
Premiere Pro CC is up to date with the latest version.
Export settings? I think you mean sequence settings:
For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

HELP! Can't capture with FCE4

I went today to a Mac Store to try FCE4 armed with my Canon XHA1... and couldn't capture at all. It says on the product description that it supports HDV format (the one I used with my camera) but still didn't find a way around. Is there something I'm missing? Can I capture with FCE4? Is there something I need to do in terms of setup either with the software or the camera?
Thanks in advance for your help!

If there was a dialog message from the application it would be good to know exactly what that said and when that message appeared. The Apple Intermediate Codec is installed with QuickTime. If you do not have that the system was not properly installed. Perhaps you used a setting on the camera which is not compatible with FCE. What exact settings did you using on the camera? What exact settings are you using in FCE? Is the camera set to output what you shot. Many HDV cameras will downconvert so they output a DV version of your media. With minimum information there is no way anyone can help you. Please give complete information about your system and settings and drives and how everything's connected.

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

My HVR-A1U was able to capture just fine. The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart. I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky. I mean heck, it found three in a one minute timeframe. My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - to capture a steeaming video played with JWplayer?

How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - I wish to capture a streaming video that is being played with JWplayer?

Hi there
Likely you will need to capture using a different tool than Captivate. Then you might save in a format Captivate understands (such as FLV or SWF) then insert that into Captivate.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can i split Client Network traffic and My exchange traffic with two differnet ip address?

Hello Everyone
sorry for my bad English and also my bad explaine
here is my network looks like
all the client on one subnet and network is 192.168.0.0
i have Dsl router that connect to Tmg server
i have Tmg with two NIC
1-192.168.0.4
2- 2 Public Ip address
i want to do this
i want to split user's traffic and my exchange traffic
i mean i want to route user's traffic with one public ip addresss
and my exchange server's traffic with another public address
but when i add additional ip address at Tmg or create new NIC card
all of my traffic route with one public ip Address what should i do?

Hi Uhan,
You need to use ENAT fuction on TMG to achive this
On the External NIC assing the Second IP as Additionl IP address (VIP)
Create a network Rule to NAT traffice From Exchange server IP address to the required Public IP which you need the E NAT.
Ensure you are creating rule only from Exchange server IP and not all INternal.
Look at the below Doc you step by step config
http://www.isaserver.org/articles-tutorials/configuration-general/Configuring-One-to-One-NAT-TMG-2010.html

Can I capture USP traffic with NI-SPY

Similar Messages

Maybe you are looking for