Can I change attachment naming - Dunning

Dear all,
I have maintain MAHN output and tested, and it is able to send to my electronic mail address account.
However, the output MAHN will send a attached PDF document and named it a "Dunning".
May I know if there is a way to change the PDF document naming to PO number?
if possible, where to setup in the config. thanks
tuff

execute OLME and then navigate to Messages > Output Control > Message Types > Define Message Types for Purchase Order
double click Maintain Message Types for PO
find the MAHN message type, select it and click on the left the folder for mail title and texts

Similar Messages

How can I change 'attach a file' back from classic mode to regular mode

I was having a problem attaching a file (it was the file's fault, not FF) and switched to the 'classic' mode. I prefer the 'regular', previous mode and cannot figure out how to switch it back. I'm hoping when I reopen it it will revert to 'normal', but I would like to go back to the regular mode. I went to the tools (gear) page and flicked the attach section back and forth to the 'show progress bar setting it was originally on but it didn't work. Help?

Hi Prem,
You can attach this manually in the document tab of BP. Thats the standard functionality.
Regards
Arun Kumar

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?

It should be an attachment. Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message. A PC, for example, will see it as an attached file rather than a preview.
You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with - how can I change this?

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20 - how can I change this?

Click on the below link :
https://get.adobe.com/flashplayer/otherversions/
Step 1: select Mac OS X 10.6-`0.`0
Step 2 : Safari and FIrefox
Then click on " Download Now" button.

Can i change AUC attached to wBS element.

1) can i change the AUC attached to WBS element ?
2) user has already posted some entries to WBS but not settled so far. Can i change the AUC now ?
3) In another WBS user has already settled to AUC the postings made in the firest month. I can change the AUC to that WBS element?

VS,
(the previous posting is also mine)
As some of members also indicated, if you have created the AUC from IM then you cannot replace it with other AUC after deleting the first one. However, you can create another WBSE, create AUC (automatically if with IM). NOw you can JV or transer the amount posted to previous WBSE as credit posting. YOu can JV/tansfer the amount to new WBSE as debit posting.
When settlement occurs, the previous AUC will get credit posting and will be zeroed, and the new AUC will get debit posting by regular settlement from new WBSE.
Hope that helps you.
Thanks

Where the GP Attachment store, can I change the destination to KM folder

Hi, SDN Expert.
I am having a requirement to store the GP attachments in KM folder, inteads of the current GP attachment root location.
The current GP attachment actually launched with this link:
http://xxxx.com:50000/webdynpro/dispatcher/sap.com/cafeugpuirt/Runtime/~wd_key566_1228452823568/Testing.txt?sap-wd-download=1&sap-wd-cltwndid=WID1228452769328&sap-ext-sid=HAkNE1ESvw_VKUJX2o5SrQIIVKykRX_Bb7sqwb*QP31A%2Fpcd%3Aportal_content%2Fcom.sap.pct%2Fplatform_add_ons%2Fcom.sap.caf.eu.gp.folders.gp%2Fcom.sap.caf.eu.gp.roles.runtime%2Fcom.sap.caf.eu.gp.worksets.runtime%2Fcom.sap.caf.eu.gp.pages.procinstance%2Fsap.com%2Fcaf%7Eeu%7Egp%7Eui%7Ert%2FRuntime%2Fbase&sap-wd-norefresh=X&sap-ep-version=7.00.200806101334
My question is do you know where exactly the physical attachment is located in the server (I can tell it is some way here: http://xxxx.com:50000/webdynpro/dispatcher/sap.com/cafeugpuirt/Runtime/~wd_key566_1228452823568/ based on the link above), and how this location is generated?
Question 2: Is this folder destination can be changed / configurable/ programable to point to KM folder?
If this is not, I may have to abandon the current GP attachment functionality and go through a new development for document upload using KM API to store documents in KM folder. But I also have a concern since the GP file atatchment cannot be disabled.
Thanks for advise and any good suggestion.
KC

George,
If this is the case, I am thinking two alternative ways to implement my requirement:
1) When the user attach the document to the GP Attachment feature, I will make one copy to the desired KN folder destination.
2) I will abandon to use the GP Attachment, and build a KM document upload UI in WD callable objects to support the requirement. The only thing is I have done some research, and found no way to hide the GP attachment icon at the menu of the GP work item.
Will truly appreciate if anyone can give some insights on these options.
Thanks,
KC

How can I manually attach images from my photo booth (imported into iPhoto) to emails? Auto function, in photo booth has my photos lying sideways?

How can I manually attach images from my photo booth to iCloud emails?
They are imported as 'events' into my iphoto library.
Auto function, in photo booth has my photos lying sideways when placed in 'mail' emails?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Sign in to download from the App Store screen has the wrong Apple ID- grayed out. How can I change it?

When I have a software update notification and I go to the 'Updates" tab of the App Store and click 'update', the flash screen 'Sign in to download from the App Store comes up the the Apple ID is wrong and grayed out so I can't change it. Where is the bogus Apple ID stored? How can I 'ungray' it to make it editable?
I'm running Mavericks 10.9.4 on an IMAC 2.5 GHz Intel Core i5.

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method.

How to Change attachment URL on a Purchase Req?

Attachments in the EBP shopping carts are transferred to an ITS server and are linked to a back end R/3 Purchase Requisition.
Note that the attachments are physically stored on ITS server and the link (URL) to the attachment and Purchase Req is stored in SAP.
As a part of decommissioning, the server which was used for storing attachments is replaced with a new server and all the attachments are moved to new server.
Since the link associated to the Purchase Req and attachment is not changed, when user is trying to open the Purchase Req attachment, it is not displaying becuase all the attachments are moved to new server.
How to change the link (URL) in the Purchase Req so that it will point out to the new server instead of old server.
Due to the following reasons manually changing the URL is not advisable.
1) 40,000 attachments link need to be changed.
2) System is not allowing to change the URL manually because of the user differences. All the attachment links are attached to Purchase Reqs by RFC user (since these are transferred from EBP environment).
Please advise what should be the feasible solution to change the URL (link) on the Purchase Req so that business can open the attachment with no issues.
Thanks in advance

According to SAP, since purchase order is a legal document they do not support the process of changing document number. They suggested I do the change with debug and replace at my own risk. In ME22N go to debug and type MEPO_TOPLINE-BEDAT. The values for this field show up as 29991231 that should be changed to 20191231 and press F8, then save the purchase order.

How can i change my account on itunes from gmail to mobileme?

I get a message saying MM members already have an accout. If so, how can i change this?
If i use my MM login, will i be able to use all the apps that i bought on my iphone and ipad?

Hey there Fonz111,
It sounds like you have a new email address you would like to use to replace the email address you are currently using for your Apple ID, without losing any of the info you have in the account. You can update the email address with this article named:
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can I change my TM disk in TC to a external HD?

I have a 1 TB time capsule and was used as time machine backup. But now as my iMac is running out of space, how can I change the disk in TC to be an external hard drive?
Plus, I want to set up the drive in the TC be use via wireless, like a share network drive. Is that possible?

how can I change the disk in TC to be an external hard drive?
Technically, you can't.
An external hard drive is defined as a drive that is attached directly to a computer by USB or FireWire connection.
The TC does neither of these things. It is a network drive that connects to the network via an Ethernet or wireless connection.
I want to set up the drive in the TC be use via wireless, like a share network drive. Is that possible?
Yes. I'm not recommending that you do this, but if you have another wireless router that is providing a wireless network, you can configure the TC using AirPort Utility to "join a wireless network".
In effect, the TC becomes a wireless hard drive in this type of setup. The Ethernet ports are not enabled in this type of configuration, so you cannot connect via Ethernet for a faster wired connection.

Can't change a linked image???

I have a lot left to learn in Dreamweaver but linking images I've done alot, I hope someone can help me on what I'm doing wrong. The linked image won't let me change links. Here is the home page http://kmmcement.com/. The bottom right picture under click to view slideshow is linked to slideshow.html. I changed the slideshow and named the new one ss.html. When I right click the picture and choose Change Link and select my new ss.html, it does not change it in the code. I tried manually to change it in the code and publish, but the new page won't load up (although when I preview the page, it loads fine.)
The only thing I've done differently on this site is that I finally learned to get the bottom navigation links to work without looking jumpy and jittery when clicking or rolling over them, by going to Modify - Page Properties and choosing links and set them up there (basic that I should've learned awhile ago). I didn't do the navigation bar until last, so would that have anything to do with not being able to change the link? If so, then how can I change it to where only the bottom navigation has it's own style as I'm sure there's going to be alot more links I'm going to be adding.
Thank you in advance for any help. (By the way, I'm using Dreamweaver CS3)

Starting on line 215 of your code, you have this:
<tr>
<td height="338"><div align="center">
<p class="style11">CLICK TO VIEW SLIDESHOW!</p>
<p><a href="slideshow.html"><img
src="images/slideshowpic.JPG" width="347" height="223"
border="0"/></a></p>
</div>
</td>
</tr>
Try changing it to this:
<tr>
<td height="338" style="text-align:center">
<p class="style11"><a href="ss.html">CLICK TO VIEW SLIDESHOW!</a></p>
<p><a href="ss.html"><img src="images/slideshowpic.JPG" width="347" height="223" border="0"/></a></p>
</td>
</tr>
Save. Upload page to server along with ss.html page. Hit refresh in your browser.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

How can i Change Text Color in table

How can i change the text color i table, the true becoming GREEN, and the text in Fals becoming RED.
Someone can help me to resolve this problem with a sample, because when i run the program all text becoming green in (TRUE) and than when i chang it to the (fals) all becoming Red.
Attachments:
Color.vi ‏38 KB

Modifying the properties of a control in a subVI do not modify the properties of a different control in the main VI. The data is the only thing passed back from the subVI. To modify the properties of the table in the main, you need to pass a reference to it to the subVI and modify it's properties. I've attached a modified llb that does what you want.
Attachments:
Main_color_Table_mod.llb ‏41 KB

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

We're still not communicating. This is why I wanted an example .iba.
Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
I've attached the screen shots and the .iba file [link to .iba file].
Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

Problem with Connection Manager. Can't change connection string / Server name

p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin-top:0cm;margin-right:0cm;margin-bottom:10.0pt;margin-left:0cm;line-height:115%;font-size:11.0pt;font-family:'Calibri','sans-serif';}
.MsoChpDefault
{font-size:10.0pt;}
.MsoPapDefault
{line-height:115%;}
@page Section1
{size:612.0pt 792.0pt;margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
Hi,
I have copied a number of SSID packages from a live server to my test server and am trying to get them up and running but I have a problem with the connection. The only thing that is different is the server name. I decided to keep the same connection in the connection manager as it is referenced in a dtsConfig file. I changed the dtsConfig file to reference the new servername [Data Source= new test server name]. I also check my paths and they are pointing to the correct config locations etc.
I found this post which was similar to my problem but I still get problems with the connection
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1319961&SiteID=1
I updated the connection by changing the server name in the actual connection. I did this from the data flow tab in the Connection Managers sections (MS Visual Studio). Right clicked - Edit - changed the name of the server name to my test server and selected the database. Test connection was fine, and saved this.
Once I saved this, the connection string changed to my current test server in the properties of the connection. However when I run the package I get the following error:
Error: 0xC0202009 at ReportsImport, Connection manager "myconnectionstring": SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Login timeout expired".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Error: 0xC020801C at Myprocess import from file, BuyAtReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "myconnectionstring" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Myprocess import from file, DTS.Pipeline: component "ReportsImport" (79) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Myprocess import from file, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Myprocess import from file: There were errors during task validation.
So even if I change the existing connection properties and save and Build my package again, my connection properties (connectionstring, servername etc) all revert back to its original data source when I re-open the package. Simply it does not seem to be saving the connection properties i put in.
What am I doing wrong or how can I change the existing connection manager to look at the new server. The database is the same and I have full admin privilege on the server.
I don't want to recreate my packages as there are alot and they are not simple.
After changing the connection properties, saving and reloading I get a connection error. But this is because it is not retaining the new connection manger setting i entered.
Incidentally - I created a new SSID to perform a simple connection and write to the the server and it was OK so there is no problem with actually seeing the my test server.
Thanks in advance

Yes, the package is in visual studio and I have executed it. There are no errors but in the output i have the error message about my connection. My dtsConfig file is added to the project in the 'Package Configuration Organizer' and path and files are correct. This is the output error:
Error: 0xC020801C at xx import from file, xxReportsImport [79]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "myconnectionname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I will try and run it using dtexec.exe. if I have two config files do i use
dtsexec.exe /f <packagename> /conf <configfile> /conf <secondconfigfile>

Can I change attachment naming - Dunning

Similar Messages

Maybe you are looking for