Can I change codecs after the fact?

I've apparently ingested all of my footage using the black magic codec (according to movie inspector of my raw .mov files). I have ripped a data DVD of the .mov files and sent it to the client who only wants the raw footage, so that they can edit it on a Windows machine. They can't seem to be able to open the files (I'm assuming due to the black magic codec). Any suggestions? I don't have to re-capture this footage do I? Thanks!

Why not send them the DVDs and have them rip the data DVDs into a format they can use. Encoding footage on a MAC for use on a PC makes little sense. The both use very different formats. Macs are Quicktime based, PCs are not.
Shane

Similar Messages

  • Changing Layouts After-the-fact

    Hi All-
    I am rebuilding my company's website on our server where
    previously it was outsourced, designed and hosted by another
    company. I feel that this is a huge undertaking ... and my boss
    thinks it should be easy. He wants me to look at the site that is
    online now and transfer the images, info, etc over to Dreamweaver.
    Anyone have any advice?
    Anyway, my question is this:
    When I started building the homepage I used the the
    "twoColLiqHdr" page layout (where the sidebar is on the left and
    the paragraph content is on the right). I want to change this so
    that the sidebar is actually on the right and the content on the
    left of the page. Can I change this since it is after the fact? If
    so, how?
    Thanks.

    This is a multi-part message in MIME format.
    ------=_NextPart_000_0024_01C97FAA.A1ADCE60
    Content-Type: text/plain;
    charset="Windows-1252"
    Content-Transfer-Encoding: quoted-printable
    If you used a Dreamweaver template, you can modify the
    template and =
    update the child pages instantly. If you didn't, I would
    recommend you =
    create a Dreamweaver template with the styles you wish and
    use Apply =
    Template to page to update the child pages. You will probably
    have to =
    adjust some of the content accordingly.
    --=20
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web =
    Development
    "lorentza" <[email protected]> wrote in
    message =
    news:[email protected]...
    > Hi All-
    >=20
    > I am rebuilding my company's website on our server where
    previously it =
    was=20
    > outsourced, designed and hosted by another company. I
    feel that this =
    is a huge=20
    > undertaking ... and my boss thinks it should be easy. He
    wants me to =
    look at=20
    > the site that is online now and transfer the images,
    info, etc over to =
    > Dreamweaver. Anyone have any advice?
    >=20
    > Anyway, my question is this:
    >=20
    > When I started building the homepage I used the the
    "twoColLiqHdr" =
    page layout=20
    > (where the sidebar is on the left and the paragraph
    content is on the =
    right). I=20
    > want to change this so that the sidebar is actually on
    the right and =
    the=20
    > content on the left of the page. Can I change this since
    it is after =
    the fact?=20
    > If so, how?
    >=20
    > Thanks.
    >
    ------=_NextPart_000_0024_01C97FAA.A1ADCE60
    Content-Type: text/html;
    charset="Windows-1252"
    Content-Transfer-Encoding: quoted-printable
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
    Transitional//EN">
    <HTML><HEAD>
    <META http-equiv=3DContent-Type content=3D"text/html; =
    charset=3Dwindows-1252">
    <META content=3D"MSHTML 6.00.6000.16788"
    name=3DGENERATOR>
    <STYLE></STYLE>
    </HEAD>
    <BODY bgColor=3D#ffffff>
    <DIV><FONT
    size=3D2></FONT> </DIV>
    <DIV>If you used a Dreamweaver template,  you
    can modify the =
    template and=20
    update the child pages instantly.  If you didn't, I
    would recommend =
    you=20
    create a Dreamweaver template with the styles you wish and
    use Apply =
    Template to=20
    page to update the child pages.  You will probably
    have to adjust =
    some of=20
    the content accordingly.</DIV>
    <DIV> </DIV>
    <DIV><FONT size=3D2><BR>-- <BR>Nancy
    Gill<BR>Adobe Community=20
    Expert<BR>Author:  Dreamweaver 8 e-book for
    the DMX=20
    Zone<BR>Co-Author:  Dreamweaver MX: Instant
    Troubleshooter (August, =
    2003)<BR>Technical Editor:  Dreamweaver CS3:
    The Missing=20
    Manual,<BR> DMX 2004: The Complete
    Reference,  DMX 2004: A =
    Beginner's=20
    Guide<BR> Mastering Macromedia
    Contribute<BR>Technical Reviewer: =
    Dynamic=20
    Dreamweaver MX/DMX: Advanced PHP Web
    Development<BR></FONT></DIV>
    <DIV> </DIV>
    <DIV><FONT
    size=3D2></FONT> </DIV>
    <DIV>"lorentza" &lt;<A=20
    href=3D"mailto:[email protected]">[email protected]=
    </A>&gt;=20
    wrote in message <A=20
    href=3D"news:[email protected]">news:gll2p1$p4c$1@forums=
    .macromedia.com</A>...</DIV>&gt;=20
    Hi All-<BR>&gt; <BR>&gt; I am
    rebuilding my company's website on =
    our server=20
    where previously it was <BR>&gt; outsourced,
    designed and hosted by =
    another=20
    company. I feel that this is a huge <BR>&gt;
    undertaking ... and my boss =
    thinks=20
    it should be easy. He wants me to look at <BR>&gt;
    the site that is =
    online now=20
    and transfer the images, info, etc over to <BR>&gt;
    Dreamweaver. Anyone =
    have any=20
    advice?<BR>&gt; <BR>&gt; Anyway,
    my question is this:<BR>&gt;=20
    <BR>&gt; When I started building the
    homepage I used the the =
    "twoColLiqHdr"=20
    page layout <BR>&gt; (where the sidebar is on the
    left and the paragraph =
    content=20
    is on the right). I <BR>&gt; want to change this so
    that the sidebar is =
    actually=20
    on the right and the <BR>&gt; content on the left
    of the page. Can I =
    change this=20
    since it is after the fact? <BR>&gt; If so,
    how?<BR>&gt;=20
    <BR>&gt; Thanks.<BR>&gt;
    </BODY></HTML>
    ------=_NextPart_000_0024_01C97FAA.A1ADCE60--

  • I got rid of my PC and the hard drive was destroyed.  This was done before I deauthorized my computer from ITunes.  Is there anyway i can do this now, after the fact.  I can't access certain songs in my library now

    Help!  I got rid of my old PC and the hard drive was destroyed.  I forgot to deauthorize it in Itunes and now I can't access a lot of the songs in my library because it says too many computers have been authorized to play the music.  IS there anywy I can deauthorize now, after the fact??

    Deauthorize all computers
    To deauthorize all your computers, follow these steps:
    Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
    Open iTunes and click iTunes Store.
    Click Sign In and enter your Apple ID.
    Click your Apple ID and select Account.
    Click Deauthorize All.
    NOTE: Apple limits the Deauthorize All option to once every 12 months.

  • Can SLD be installed after the fact

    Hi,
    My boss wants to change which system is the SLD master.  The system he has in mind was not installed with a local SLD, but rather pointing to the original master.
    Can this be done?  Is there an established procedure?
    Thanks,
    Russ

    Hi
    You can certainly fulfill your boss decision.
    Basically, you can make any system (provided it has all necessory resources like CPU, Memory, High Availability setup with multiple systems) running with WAS 6.40, Netweaver 2004, Netweaver 2004 DUAL STACK or Java alone implementation/setup.
    So If you are running with Java then you make that system to host as SLD.
    Thus, on your Java use this URL http://<full host name>:<http port>/SLD
    Use your Administrator account (If implementation is only Java) or use j2ee_admin account (if your implementation is dual stack)
    But, once you decide which system you want to make your future SLD, initially you need to configure Data Supplier feature under 'Administration' part of SLD to sync-up so that all the data in the current data repository migrated/copied over to the new SLD system.
    I hope this helps your in making decision and please revert back if you are looking further help on regards to this implementation.
    Regards
    Sekhar

  • Changing resolution after the fact

    If I edited in 720, then decided I want to change to 1080, do I have to start from swcratch? Or could I re-export the files and then substitute them?

    What's the original media? What are the item properties of the clips you're working with?

  • HT4623 When I download an app it doesn't request access to photos and am unable to do it after the fact as the app isn't on privacy to allow me to do it

    WHen I download an app it isn't able to access my pics and I can't do it after the fact either as it isn't in privacy to add

    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • Changing the document page size after the fact.

    Does anyone know of a way to change the page size globally after the fact?
    I have sent a 200 page book created with Pages '08 to my printer. The work has a full bleed watermark in the background on a custom 7" X 11" document. I've just been informed that he needs to increase the paper size to 7.25 X 11.25 and have me increase the watermark so it can be trimmed down.
    Is there a way to change all 200 pages or do I need to set-up a new document and do a whole lot of cut and paste?
    Thanks in advance everyone.

    Your problem is that the change is not proportional.
    However it is not a great change, 6.66% at most. If you don't mind a subtle change in height vs width, just create a pdf of the entire document and tell the printer to change the size on going to plate.
    Alternatively you can simply scale it up the 6.66% which will make the height about 0.5" too high and trim away the excess.
    The other way is only scale it up 2.27% which gives you the right height but leaves you with 0.1" less width.
    Or you can go in between and have a compromise for both directions by scaling up 4.4%.
    It depends if you have white margins in either direction that can take up the slack and also how much bleed you have on the watermark. You only need 1/8" to cover any trimming errors.
    As this appears to be quite a long book and would need to be imposed up in signatures, I would imagine the printer must have the necessary imposition software to allow for creep etc, which should also allow for non-symmetrical scaling.
    Don't you Americans ever feel at moments like these that you wish you weren't the last people in the world to not use metrics and rational paper sizes?

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edi

    I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edit the file, but when i open AE, it still the old same keys.
    How to have this working? And why until now, we don't have a GUI for shortcuts?
    I use the Apple Wireless Keyboard, and need to change the preview keys to a suitable ones, because this keyboard don't have the num pad.
    Until CS6, i was using ? and Shift+?, in the place of some kind of Zoom.
    But this time, i edit the file, in a sort of way i tried, and non of then change at all.
    WE NEED A GUI in AE Preferences to CHANGE THE SHORTCUTS!
    Thank You!

    The best way to add a +1 would be for everyone to file a feature request. Those are officially tracked by Adobe (unlike this user-to-user forum) and the more people that ask for something, the more likely it is to be implemented.

  • When I import a CD album that includes songs with co-artists, the album is saved once with all of the songs with the main artist only, and then one album for each song with a different co-artist.  How can I avoid that or fix that result after the fact.

    When I import a CD ablum that includes songs with co-artists, the album is saved once under the album name with all the songs from the main artist; then each song with a different co-artist is saved separately under the album title with just that song.  Who do I prevent that or fix it after the fact, i.e., copy the single songs to the main album?

    Why aren't songs with the same album art grouped together? - http://support.apple.com/kb/ts1468
    Compilation checkbox is under options tab when editing multiple tracks at once.
    https://discussions.apple.com/thread/4559720 - discussion of using compilation vs. album artist to group tracks
    Jan 2014 discussion: https://discussions.apple.com/thread/5775641

  • Proxy media created after the fact

    In another thread I was trying to find out why my multicam clips were frozen in place in the angles viewer while I edited them in the timeline. One reader's suggestion was to convert the clips making up the multiclips into proxy media. I did so; right-click on clips and select "Transcode media..." then "Create Proxy Media." That all worked as it should (though it did not remedy the angles viewer problem) however what I'm wondering now is just what did I do to my project? I just blindly transcoded to proxy but what does that mean to the edit I'm doing? How does this affect eventual output? Could someone please explain the ramifications of this action?
    alan b

    Just creating proxy media does nothing to your project.
    I suppose you also changed the preferences to use proxy media (Preferences->Playback, "Use proxy media"), otherwise you'd still be using the original or optimized media all the same.
    All the edits you make are preserved, whether you work in proxy or not.
    The usual workflow when you need proxy is simple:
    1) create proxy media if you haven't already (as you did)
    2) switch to proxy media in preferences (as I suppose you also did)
    3) when finished, switch the preferences again ("Use origina/optimized media") so that the final export is done in full quality. (In the meantime you can of course export "draft" versions in proxy mode)
    Note: if you switch proxy *before* creating proxy media for all the clips, you'll get the "offending" clips appearing in red with a yellow warning; if that happens, just create the proxy media after the fact and everything will be fine.

  • I have two iPhones and an iPad under same Apple ID. How can I change one of the iPhones to a separate id?

    I have 2 iPhones &amp; an iPad under 1 Apple ID. How can I change 1 of the iPhones to a separate account?

    Sign out of the Apple ID on the device in question, making sure to disable the Find My iDevice feature.
    Sign in with the new Apple ID.
    If the intent is to sell the device, simply restore as new after disabling the Find My iDevice and signing out.

  • CF9 - install Solr after-the-fact

    We have a Windows 2003 server with Multiserver configuration of ColdFusion 9 (and subsequent 9.0.1 updater) installed.  Unfortunately, we installed CF without selecting the Solr Search Server install option, and now are finding a need for it.  What are our options for getting the Solr Search Server installed on the same server? 
    Searching through Google, I found some options but not sure which is best:
    Solr Standalone Installer - seems to be for installing on a separate server, which we do not want to do.  Unclear if this would be safe to install on same server as CF 9, and also would not give ability for any updates to be automatically updated.
    Do a complete reinstall of CF 9 again on the server, but that would require extra effort and retesting of applications. 
    Install via CF 9 installation disk.  One blog I found suggested to go through the installation process again, selecting to install with ear/war as multiserver, then would be able to select option to install Solr.  We tried this on a test server, but were getting Solr errors (NullPointerException) when trying to create a new Solr collection.
    Any advice would be greatly appreciated.  I only wish Adobe had better documentation on this, as I would think it could happen more frequently.
    Thanks!
    Tiana

    Very interesting question, Tiana. But to be honest, no, it doesn’t come up that often, at least that I’ve noticed (and I’m pretty active on these and other CF troubleshooting forums and lists).
    As for solutions, I suspect you’ll find the first option below works well. As far as I know, there’s no problem at all running it on the same machine as CF. And I’d not worry as much about “updates”. It’s not often that updates seem to relate to the Solr engine (though I’ve not studied that really closely.)
    But you’re right: it really ought to be easier to enable Solr after the fact (whether for the Standard/Server or Multiserver form of deployment). I too am surprised that it’s not come up before. I’ve just done a fair bit of googling hoping to find someone having discussed it, to no avail.
    It would be a cool thing for someone to research/blog about. It may be fairly simple, just as enabling CF’s built-in web server or RDS features can be enabled after the fact, if you know what XML files to tweak. But then the Solr feature in CF runs as a service, so that has to be installed (I suspect that installer will do that), and then there are CF Admin configuration settings that need to be tweaked. I don’t use Solr enough myself to be excited to pursue this myself.
    But do consider asking Ray Camden and/or Ben Nadel, who both offer a means on their blogs to answer specific questions. I think they’d be interested in this one, in particular, since it would be a great contribution to the community to document if there’s any solution. Ray can be reached via http://www.raymondcamden.com/contact.cfm, and Ben at http://www.bennadel.com/ask-ben/ask-ben-nadel.htm.
    If you find an answer some day, please do share it here. Hope that helps.
    /charlie

  • Install ichat after the fact...

    I'm a tech for a school. I'm trying to talk our admin into use ichat for collaboration between classes. the disk image for our computers was scripted to delete ichat, therefore, it's not there.
    any suggestions on a stand along install for ichat/isight only?
    thanks
    PS... drag and drop didn't work (tried to drag the app, the prefs(plist) and .pkg file... still no go.

    any suggestions on a stand along install for ichat/isight only?
    The easiest way is explained in Ryan Mathus' I've deleted iChatAV 2.x - Can I get it back? FAQ.
    This is just one of the FAQs included in the iChat AV Frequently Asked Questions (FAQ) folder at the top of iChat AV Discussions.
    You can also check the iSight Tips and FAQ. There, among other things, you will find Some Applications you can use with iSight if you are interested in adding other software for your iSight.
    b OR
    see Defcom's response in msg # 1 at your other post of this same question at installing ichat after the fact. (In the future, please save both us and you some time. No need to multi-post.)

  • I tried to update my icloud storage and it wouldn't accept U.S. as my residence.  I hit cancel and tried to enter my info again and my card was declined.  Notice after the fact that hitting cancel might cause problems...

    I tried to renew my icloud storage/change credit card info and it refused to accept the U.S.  as my country of residence.  I cancelled and tried again and my card was declined  Notified after the fact that hitting cancel could cause problems.  Please advise.  Thank you.

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

Maybe you are looking for