Can I Change/ Extend the vendor from one purcahse Organisation to Other Pur

Dear Al
Is it possible to Change/extend the Existing vendor to the new Purchase organisation or again we should create new vendor for the under the New Purchase organisation.
Can you help me out please.
Senario:
We have 3 business areas earlier we have only one puchase organisation for all the 3 business areas now we have created one new business area and plants accordingly we have also created one new purcahse organisation to generate PO. while selecting the vendor for creation of purchase order it is giving message the at this vendor has not in the purcahe organisation.
should i extend the same vendor to the new purchae organisation or we need to creat New vendor?
thanks & Regards
Rao

Hi
You can extend the existing Vendor Master record to a new Pur org. You would just need to create the Pur Org data for this master record. Please use the transaction code MK01.
Karthik Coneru

Similar Messages

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

How to access the screen from one function group to other function group

Hi Experts,
How to access the the screen from one function group to other function group.
Please help me on this , Bcoz it is client requirement i need to finish this urgently.
Please
Thanks
Basu

HI ,
You can do a call transaction or submit and return
Regards,
Sooness.

XK99 detailed steps to extend vendors from one company code to other

Company code X having vendors 9000000000 to 9999999999. Now I wanted to extend all vendors to Y company code. Kindly suggest me detailed steps. i know XK99 but give steps.

Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot

Mass extend vendors from one company code to other

Company code X having vendors 9000000000 to 9999999999. No I wanted extend all vendors to Y company code. Kindly suggest me.
Thanks
GP

Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot

Procedure to extend/ copy vendor from one CCODE to another CCODE

Hi Experts
I am trying to copy a vendor from one company code to another company code in the same client using FK15.
I am using the program FFBIKR10 to do that. After executing this program, i see the job in SM35.
Let me know how to proceed
Thanks
Rajanikanth

As I am copying one vendor, i can execute in foreground. My problem in SM35 is my job is not getting picked up or the i am not able to see the log.
How to know if my job is completed ?
Thanks
Rajanikanth

Do we have the option to copy all the jobs from one OEM admin to other ?

Hi Experts,
I have a number of jobs created under one administrator account in OEM 10g. And now my requirement is to re-create these jobs under some other adminstrator User account.
So, is there any process in OEM , where we can copy all the jobs from one user account to the other user accounts.
I guess create like option can be only Helpful if you are planning to copy a single OEM job. And also , administrator who will copying the jobs , should have a super admins assigned so that the job is visible for him.
So, can someone Help me out in letting me if there is a process for doing this in a single shot ?
Thank you very much for your Help.
Thanks,
NAV.

Do you need the jobs to be OWNED by the new admin or just accessible and modified? You can edit the job and grant the user Full permissions in the Access tab. Otherwise, the only option is to Create Like as you mentioned. No batch method.

Can you delete all the text from one contact?

I have a BB curve 8330 from Verizon.. Lets say I text 10 people and I want to delete the texts from just one of those contacts.. Can I do a mass delete with out getting rid of all the other texts with out having to delete them one at a time?
I hope that makes sense..
C

two ways :
1)
home screen >> Search application
do a search by name (use menu to select the person in your Contacts)
uncheck everything except "Messages". "Messages include email, SMS, MMS (and maybe some other types)
---> you get all the messages from/to that specific person.
2)
home screen >> Contacts application
view the contact, open menu and select "View Activity"
---> you get all the messages & calls from/to that specific person.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to move the balance from one GL account ot other GL account in a report

Hi,
I have an issue with one GL account balance should be move to other GL account and also it should be reflect in reporting.
For example i have one account like 200100 and it is having some balance in current period. Now i want to move from other account like 200102. this will be reflect in the reports. how can we do this in BW.
Please any one can help me...
Thanks in advance,
Amar.

I think, you need to elaborate the issue bit wide... Couple of things;
If you see the descrepancy in the data in BW that from in source system, better look at in BW where it went wrong and see if you can correct it there (may be in PSA) or you can even re-extract the data and then load it into the respective cubes or data targets.
On the other hand, if the data in BW matches with that of the source system, better ask the consultant/ IT team member whoever is responsible to look at it, if at all if it needs to be corrected so he can post the corresponding journal entries. In this case, if it need to be corrected, you will have to re-extract the data to have it match with the source system or if you can wait until the next delta...that will take care of it...

How to read the value from one context node in other in the same view.

Hi,
I am working on enhanced component ICCMP_BP_CP/BuPaContactPersonCreate , i need to read the partner_guid from Customer context node in contactpersonaddress context node.
Could you please guid me how to achieve this? if possible, please explain me with some sample code.
i am trying this code in GET_FAXFAX method of contactpersonaddress-faxfax, but it is throwing me the type cast exception.
data: lr_entity type ref to cl_crm_bol_entity.
data: lv_test type string.
lr_entity ?= collection_wrapper->get_current( ).
lr_entity = lr_entity->get_related_entity( 'BuilContactPersonAddressRel' ).
Thanks in advance.
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jun 25, 2009 7:46 PM

problem solved by writing the code in context node class CREATE_CONTPERSADDRESSVALNODE method
coll_wrapper = customer->get_collection_wrapper( ).
TRY.
      entity ?= coll_wrapper->get_current( ).
    CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
CONTPERSADDRESSVALNODE->on_new_focus( focus_bo = entity ).
    DATA: lr_collection TYPE REF TO cl_crm_bol_entity,
          lv_fax TYPE string,
          lv_fax_ext TYPE string,
          lv_tel TYPE string,
          lv_tel_ext TYPE string,
          entity_addr TYPE REF TO if_bol_bo_property_access, "#EC *
          coll_wrapper1 TYPE REF TO cl_bsp_wd_collection_wrapper.
     lr_parrent type
    lr_collection = entity->get_related_entity( 'BuilStandardAddressRel' )."'BuilContactPersonAddressRel' ).
    IF lr_collection IS BOUND.
      coll_wrapper1 = contpersaddressvalnode->get_collection_wrapper( ).
      TRY.
          entity_addr ?= coll_wrapper1->get_current( ).
        CATCH cx_sy_move_cast_error.
      ENDTRY.
getting fax number
      CALL METHOD lr_collection->if_bol_bo_property_access~get_property_as_value
        EXPORTING
          iv_attr_name = 'FAXFAX'
        IMPORTING
          ev_result    = lv_fax.
***setting fax number
      CALL METHOD entity_addr->set_property
        EXPORTING
          iv_attr_name = 'FAXFAX'
          iv_value     = lv_fax.

How can i change my appleid username from one email address to another

I seem to have one email address ([email protected] ) showing on my iphone, but the email attached to the itunes on my pc (and my store credit card) is [email protected]
How do I change the iphone email to the itunes email?
Thanks

Sign out of your Apple ID under Settings - iTunes & App Stores, and then enter the new ID you're using with the pw.
Ignore the post above this one.

How can i change a paid app from an Apple ID to other different Apple ID?

Hello,
When i puchased my Ipad 2 i purchased a couple of paid apps for my little daugther, however due the damage she caused to my device, i decided to buy a new ipad.
I need to keep my Apple ID intact and thats why i have created a new one for my wife to be used with her apps and my little dauther apps.
My question is: How to change just a couple of paid apps from my account to the new account? Do i have to buy the apps again to use it trough the new Apple ID?
Thank you

yes u do. there is no way to transfer apps to another apple id.
u can, however, keep the same apple id signed into the itunes/app section of every device and be able to keep ur apps. if u want wife and daughter to have different apple id's then just sign into those id's in the other places (like icloud settings) but leave urs signed into the itunes.
if u do that then it might be a good idea to put restrictions on the other devices to prevent ur daughter from being able to buy anything

How can I change my apple ID from current country to the other

How can I change my apple ID from one country to the other (HK -> Canada)? I have already amended the address and credit card information instead. But the error message still shown my appleID only can purchase in HK. Anyone can tell how to update my appleID to purchase Canada apps. Thx.

Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

Block the vendor from quality side as process from the evoluation

Dear All,
How to Block the vendor from the quality side. i check the MK05 . but if i block thru this txn. the purchase people will change unblock the vendor from XK05 .
I need to know , if the vendor is blocked . it will not be unblock by anyother than from the quality.
or
anyother process is there to block as a process
say ex, in vendor evoluation, if the quation mark is less than 80 % , the vendor should be blcoked ,as a process.
Thanks
vraj

Hi Sujit,
What you mean to say in the privious reply.
is it possible in any other way or not.
With regards
vraj
hi
i think is other way round
http://sapdocs.info/application-modules/mm-overview/mm-transaction-codes/

How to Move or Copy the Tables from One Database to Another Database ?

HI,
Can any one help me on this, How i can move or copy the tables from one database to another database in SQL server 2005 by using SQL query. Hope can anyone provide me the useful and valuable response.
Thanks
Gopi

Hello,
Maybe these links help you out
http://www.microsoft.com/downloads/en/details.aspx?familyid=56E5B1C5-BF17-42E0-A410-371A838E570A&displaylang=en
http://www.suite101.com/content/how-to-copy-a-sql-database-a193532
Also, you can just detach the database make a copy and move it to the new server.

Can I Change/ Extend the vendor from one purcahse Organisation to Other Pur

Similar Messages

Maybe you are looking for