Can i Change How the Remote Chooses a Button?

I'm working in iDVD 08 and I've got three buttons in a menu. I'm using a the Center Stage theme and I have removed the drop zones. Anyways I have three buttons on this menu one in the middle right, middle left, and the bottom of the screen forming like a triangle...i want to be able to set the buttom on the middle right to be selected when the right arrow on a remote is pushed...but idvd only seems to do this randomly (it works in some menus, but not all). Any one know how I can control this?

Actually, I figured out that I you select the two bottons that are horizontal together and then select the alignment for middle, idvd will then navigate properly (even if the two buttons were already in line)

Similar Messages

  • Can I Change How The Pointer Appears Over A Link?

    Is there a way to change my pointer so that it doesn't change to the little pointer finger when it goes over a link? I have a larger pointer and it shrinks back down to the teeny hand when I'm on the web. It drives me nuts.
    Also, I'm still using 10.3.9, but I was hoping there was some way for me to change it. Is there a preference pain or something?
    Thanks!

    In Tiger, the Universal preference panel>Mouse - at the bottom - "difficulty in seeing a mouse" gives the option of making the pointer larger. When I tried it, i.e. move the slider to the right, the pointer did not reduce in size when I moved over a link in Safari. Not sure if the same feature is offered in Panther.
    Hope this helps.

  • Can I change how the genre is chosen for a new selection?

    I read in an answer to someones's question that default genres cannot be changed. Today I loaded one of my music CDs into iTunes and the genre of "Pop" was assigned to it automatically. But I don't use that genre. Is there a way I can choose the genre and have that one assigned as the CD is going into iTunes? I know I can go to each selection and change Pop to something else, but that is tedious. Thanks.

    iTunes likely got that genre from the Gracenote CDDB. If you don't like the one you get, you can change it for all the tracks at once by selecting them all, right-clicking, and selecting "Get Info". Type the genre you want in the genre field and click OK.

  • How can I change how email "from" and "to" are being handled by Groupware?

    When a follow-up business activity (e.g. sales visit) is created in CRM and assigned to another by the "person responsible" field, it triggers the following action in Outlook:
    u2022 Outlook recognizes that "created by" and "person responsible" are different
    u2022 This recognition triggers sending an email invitation for an appointment
    u2022Groupware presents / Outllok reads the "person responsible" to populate "from" Email field and "created by" to populate "to" Email field
    u2022Outlook Email invitation is received by creator of the assigned follow-up (confusing the user since they are naturally thinking that the person they made responsible for the follow-up would need to accept the assignment)
    How can I change how the email "from" and "to" are being handled by Groupware/Outlook ... in standard functionality?  ... In custom work?
    Edited by: Daniel A. Joseph on Jul 24, 2008 4:00 PM

    Welcome to the Apple Community.
    If you have a @me.com address, you can change the address you use to send email from using the drop down box in the from field in your email.

  • How can I change a the dropdown menu background according to the text selected?

    How can I change a the dropdown menu background according to the text selected?

    Read here about how to use the color object correctly:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/common/html/w whelp.htm?context=Acrobat9_HTMLHelp&file=JS_API_AcroJS.88.260.html
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/common/html/w whelp.htm?context=Acrobat9_HTMLHelp&file=JS_API_AcroJS.88.261.html

  • I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

    I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

    Several protocols may be used.
    Here I describe two of them.
    (1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
    (2) copy your text, paste in TextEdit and enter the Edit menu.
    I guess that you will recognize the items in your English menu.
    I apologize but I don't know the English items.
    Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • Apple TV sorts my photos only in ascending order, how can I change so the most recent EVENTS appear first?

    Apple TV sorts my photos only in ascending order, how can I change so the most recent EVENTS appear first?

    I'm looking for an answer to this, too, since I have thousands of Events, and so scrolling down to the bottom every time I want to show my newest photos makes it almost unusable.

  • How can I change all the fonts at once on labels I downloaded from Avery?

    How can I change all the fonts at once on labels I downloaded from Avery?

    select all (Edit > Select All), then open the font panel by selecting the menu item "Format > Font Show Fonts".  Now select the font you want.
    I could only find Templates from Avery for Pages.  I think my suggestion in still good but want you to know you posted this question in the forum for Numbers.

  • Can anybody tell how the battery can be changed in iPad

    Can anybody tell how the battery can be changed in iPad

    Google ifixit and iPad model.
    http://www.ifixit.com/Teardown/iPad+2+Wi-Fi+Teardown/5071/1

  • I have the wrong email address in ICloud. How can I change to the correct email address?

    I have the wrong email address in ICloud. How can I change to the correct email address?

    I have the same problem. I changed my email address with itunes, & the icloud website knows it too. but the icloud on my iphone still has the old one & wont allow me to change it. I can change the password but the email address is grayed out so I can't change it. I have tried signing out via the store on my phone & back in but it made no difference. Help!! I keep getting error messages about the photo stream ..but I don't know what I can do to correct it. HELP!!!

  • HT2304 IR Receiver firmware update Apple released an update that essentially changes how the IR receiver communicates with the OS

    remote no longer works the likely culprit is a missed IR Receiver firmware update.  Back around version 2.1 or 2.2 of the Apple TV operating system Apple released an update that essentially changes how the IR receiver communicates with the OS.  If your Apple TV missed that update and then later gets updated to the newer 3.0.X firmware your Apple TV will no longer respond to input from your remote, though the light on the front of the AppleTV will blink.  The solution is to load the update manually, but unfortunately that requires ssh access on the AppleTV.
    new commands

    Thanks Dave,
    You are a genius. I can't tell you how much I appreciate being benifit of your knowledge and willingness to share it with others. A thousand times over, thank you!! I burned the little utility to a CD on another machine/setup, ran the little sucker and restarted in OS X like a hoot!!! About 8 minutes later I had the processor upgrade installed and see quite an improvment. Again, thanks and kudos be upon you,
    James

  • Can I Edit From the Remote View?

    This always bites me.
    When I go to Manage Sites and pull up my clients website and
    I go to the Remote View, I can't seem to open the file and edit it
    and it be done from the server.
    Do I always have to download it and it overwrites my Local
    View copy and then "Put" it back up on the Remote View site?
    Does this not work like Microsoft Frontpage did where I could
    edit the server files "Live"?
    The problem I have with my Local copy versus the Server copy
    is I don't know if the client has edited any files or not.
    Any help on this Get and Put stuff would be very much
    appreciated.

    > Do I then have to upload all of those 218 files back to
    the Remote server?
    Yes sir. That's the biggest argument against using Library
    items.
    > And won;t that overwrite the Remote server files?
    Yes - it should do so.
    > And how do you do that?
    It's a pain. You have to make sure that ALL files at the
    remote site are
    current edit level files. This means that if anyone else is
    working on
    files they must either save and publish them or discard their
    edits. Then
    you would have to downsynch to your local site, make the
    change and then
    upsynch back to the server.
    Library items and Template ONLY change local files. Period.
    They have no
    function on the server at all.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "KTPUB" <[email protected]> wrote in message
    news:[email protected]...
    >
    quote:
    Originally posted by:
    Newsgroup User
    > > The problem I have with my Local copy versus the
    Server copy is I don't
    > > know
    > > if the client has edited any files or not.
    >
    > So continue to do it the way you are. Double click on
    the remote site,
    > and
    > get all dependent files. Make your edits, and put with
    all dependent
    > files.
    >
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > But I have a change on a Library file: a menu .lbi file
    that affects 218
    > other
    > files. So when I make my change from the Remote Server
    file it wants to
    > update
    > the 218 Local View files.
    > Do I then have to upload all of those 218 files back to
    the Remote server?
    > And won;t that overwrite the Remote server files?
    > And how do you do that?
    >
    >
    >

  • Trying to connect my new Apple TV to my Samsung flatscreen TV is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

    Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

    Changed the cable and its working.

  • Box asking if Mozilla Firefox can make changes to the computer harddrive

    A box appeared on the screen asking if Mozilla Firefox can make changes to the computer harddrive. I contacted Trend Micro Security and they said Mozilla Firefox wouldn't want to make changes on my harddrive. I have just paid for a technician to remove viruses on my computer so I am now very suspicious of anyone who wants to change the harddrive. Trend Micro again cleared my computer of viruses but I want to know if the box requesting to make changes came from Mozilla.

    Check that you do not run Firefox as Administrator.<br />
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
    * Privilege Level: "Run this program as Administrator" should not be selected<br />
    * "Run this program in compatibility mode for:" should not be selected<br />
    Also check the Properties of the firefox.exe program in the Firefox program directory.<br />

  • I want to set a variable with default value and can be changed by the user

    hi,
    i want to set a variable with default value and can be changed by the user, so i new a variable with setting : customer exit, single value, optional, ready for input.
    in my customer exit code, i set a default value, eg. 20070530
    when the variable screen popup, it display the default value 20070530, i changed it to 20070529, but it doesn't work , it still display the data in 20070530, how can i solve this problem? 
    your help is appreciated.

    Liu,
       As mentioned by Anil, you need to restrict your customerr Exit code to I_STEP = 1.
    or.
       <u>Open your Variable in change mode, in the Last Page os the Variable Maintenance you can provide default value. Note: you are doing same thing in Customer Exit. In your case no need of Customer Exit.</u>
    Nagesh Ganisetti.
    Assign points if it helps.

Maybe you are looking for