Can I change material group or division when the material still has stock?

What will be effected?
Thanks in advance,
Linda
Edited by: Linda Gao on Jun 23, 2011 6:06 PM

Division: Changing a division might not have much impact.
Material Group: Changing a material group will impact on the Purchasing.
-->The info structures statistics might already been updated with the old material group.
--> The release strategy has to be checked if you are using the material group.
--> POs which has been ordered with the material group (like service)

Similar Messages

How can I change my iCloud email address when the account that is attached to my iCloud right now does not exist. I tried to delete the account attached to my iCloud on my iPhone but it requires a password. The password I type in does not work because I h

help please

If the old ID ("email address") is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT5616 how do i change my apple id on my iphone. I have changed it on my account but the phone still has the old id and therefore will not allow me to doadload any apps

How do I change my Apple ID on my iphone? I had to change my email address but haven't been able to successfully on the my phone and not it will not allow me to download apps because the id is the old one

settings - app/itune store - apple id - log out and log back in with your new id.
NOTE: apps are tied to the apple id that was used to purchase it.

My iPhone shuts down when the battery still has about 30%

When I then try to restart, it won't, but just show the red low battery icon with the charger cable telling me to recharge first. When I then plug in the charger, it shows maybe still 27% and starts to charge. Before this problem occured my iPhone went down to 1% or so and only THEN shut down automatically.
Have reset my iPhone and "recalibrated" the battery (total discharge followed by a full charge to 100% with original iPhone charger). Problem persists.
Thanks for any help!

Sorry, iPhone 4S, but IOS 7 something.

My MAC Pro shuts down when the battery still have 50 minutes life.

My MAC Pro shuts down when the battery still has 52 minutes life without any warning. Does anyone have this problem? BTW, it is less than one year old.

You must have a MacBookPro, right? MacPro's are big desktop models.
Try the MacBookPro battery forum or their Usage forum.
DALE

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

HOW TO GET THE DIVISION OF THE MATERIAL IN QUAESTION AS MANDATORY IN GR

HI FRDS,
LEMME EXPLAIN MY SCENARIO.
A MATERIAL IS USED IN 2 DIVISIONS A AND B.IN MM01, DIVISION IS MANDATORY. SO WE CAN ENTER ONLY ONE DIVISION.IN GR THE CORRESPONDING BUSINESS AREA IS ASSIGNED. BUT IF THE MATERIAL IS GOT TO BE PURCHISED FOR THE SECOND DIVISION THEN WHILE GR PROBLEM ARISES AS THE MATERIAL BUSINESS AREA COMES AS FOR THE FIRST ONE WHICH IS NOT CORRECT PRACTICALLY.
ACTUALLY THE BUSINESS AREA IS ASSIGNED BASED ON THE COMBINATION OF DIVISION , MATERIAL AND PLANT. SO IF A MATERIAL IS USED IN 2 DIVISIONS OF SAME PLANT THEN THE MATERIAL IS ACTUALLY ACCOUNTED TO ONLY ONE BUSINESS AREA.
I CAN LEAVE THE DIVISION AS OPTIONAL IN MM01 ,BUT IN DOINNG SO I WILL NOT GET THE EXACT ACCOUNT FOR A PARTICULAR DIVISION . IT WILL BE FOR THE WHOLE PLANT ONLY.
AND MY QUESTION IS LET THE DIVISION BE BLANK IN MM01 AND ALSO IN ME21N BUT IN GR IT SHOULD BE MADE REQUIRED SO THAT I CAN GET AN OPTION TO FILL THE CORRESPONDING BUSINESS AREA WHILE DOING GR.
AND FOR OTHER MATERIALS IF I HAD MAINTAINED THE DIVISION IN MM01 THEN IT WILL BE TAKEN TO GR AUTOMATICALLY WHICH IS OK.
IS THERE ANYWAYS TO MAKE BUSINESS AREA AN OPTIONAL FIELD IN GR AND RIGHT NOW IT COMES AS DISPLAY ONLY IN GR WITH THE BUSINESS AREA ASSIGNED IN MM01 WHICH WE CANT CHANGE.
THX FOR UR HELP IN ADVANCE
HOPING TO GET A SOLUTION FORM U ALL
RAJA

Hi Srinivas,
u r correct. today i tested and the business area comes from the plant-division -business areas settings in SPRO.
atlast we came to a conclusion that for the materials that are used by more than one division we need to assign a common division and then at the end of the financial yr we need to separate the accounts according to the business area by finance entries like journal vouchers.
now we are also thinking of a separate material code in case if the material is used by other division.
would u just think of the better of the two options i have told above and comment on that pls
regards
raja

Debugging Middleware/BDOC when the material data transfered from R3 to CRM

Hi,
I am updating the status of Product in CRM using BADI - PRODUCT_CUSTOMER2 (R3_TO_CRM_MATERIAL). This happend when the status is updated in ECC (MM02).
Now the problem is, I want to debug this BADI, when the material is updated in MM02.
Could you please help me, how can I debug this BADI.
Thanks,
Sandeep

Hello Sandeep,
Please check below general steps to debug the delta download of ECC material.
in R/3
Set a break point in the function module CRS_MATERIAL_COLLECT_DATA (BTE Implementation)
Create/Change the material in R/3 by using transaction MM01 or MM02 and press save button.
Now you can debug the function module CRS_MATERIAL_COLLECT_DATA
in CRM (inbound queue)
Deregister the inbound queue R3AD_MATRIA* in transaction SMQR
Go to the transaction SMQ2 select the inbound queue and debug the queue
Set a break point on the mapping function module: COM_MAP_BAPIMTCS_TO_PROD_MAT
for validation debugging Set a break point on the validation function module: COM_PRODUCT_MAT_VALIDATE
I am sorry that I do not know where BADI PRODUCT_CUSTOMER2 is called.
Hope the baove information could be helpful.
Best regards,
Maggie

I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
Ideal is to separate your system from your data.
You should always have bootable backup / clone of your system
Don't use a green drive for system or data though.
When you are done cloning system and/or data, remove the old original and keep as backup.
Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
http://www.bombich.com/software/updates/ccc-3.5.html
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

How can I change my Profile photo or edit the thumbnail?

QuestionHow can I change my Profile photo or edit the thumbnail?
AnswerThere are a couple of different ways to change your profile photo or thumbnail image on Tagged.
Here's a quick How-to video that shows you how to change your profile photo
If you wish to change your profile photo, follow the instructions listed below:
Hover your mouse over 'More' in the top Nav bar and select Photos.
To use one of your previously uploaded photos as your profile photo, place the cursor over the photo you wish to use, and click the small green “#1” box when it appears
If you wish to use a new image as your profile photo, upload the image to your photo gallery, and then click the small green “#1” box on the photo
If you are viewing one of your photos individually, you can also set it as your profile photo by hovering over it and clicking the same green "#1" button. You may also edit the caption and comment on your photo in this view
You can also change your profile photo by doing the following:
On the Navigation bar click Profile and select the Edit Profile link to the left of your Profile picture.
To upload a photo locally from your computer, click the “Browse” button, select the image you wish you use, and then click “Upload”.
To upload a photo using an image URL address, click the “Add from image URL” link, paste the URL address into the field, and click “Add Photo”.
To use a photo from your gallery, click the “Use one of my photos” link to open a thumbnail gallery of your uploaded images. Click on a thumbnail to set that image as your profile photo.
After selecting a photo, you can alter its thumbnail by the marquee box by dragging the “anchor” points of the box. When you are finished, click "Save Thumbnail"

HELP! I was fooling around with my profile pic and selected and saved a cropped thumbnail. I hate it, and I haven't been able to figure out how to return my thumbnail to just a mini-version of my full profile pic. I've even re-up-loaded a copy of the original photo, with a different file name, but Tagged automatically crops it to the same thumbnail. Is there any way to return my thumbnail to just a mini-version of my whole pic? Thanks for your help :~)

Material Group field is Missing in Material Master - Purchasing view ?

Hai Experts,
I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view. It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..

I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value & Chapter ID Combination.. But in Cenvat Determination Field, How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
I checked Material Master in mm03 [ Display].
I clicked More & Pre Vals. option in Foreign Trade Import.
For More, It shows this error.
Record 21 MORE does not exist in table T133E
Message no. M3748
For Pre vals., It shows this error.
Record 21 J1PR does not exist in table T133E
Message no. M3748
Kindly guide me..
Thanks & Regards
Swetha

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

I have iphone 5 can i change it from apple and pay the difference bettween both value

i have iphone 5 can i change it from apple and pay the difference bettween both value

Ask your retailer. At worst, you can sell your iPhone 5 independently (of Apple and your retailer) and separately purchase the later model.

HT5361 MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect displ

MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

Can I change material group or division when the material still has stock?

Similar Messages

Maybe you are looking for