Can i change the back Color from the IPhone 5c

Can i Chang the back Color from the i-Phone 5c .Now i Heven Pink and i want Blue Shoud i go to a Apple störe to do that and how much does it cost!!!

Apple does not do this at all.
Not sure if anyone does this. if they do, it will void the warranty

Similar Messages

HT1766 HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER?????

HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help

you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn

How can I change my apple address from the US to the Philippines to make my credit card work?

How can I change my apple address from the US to the Philippines to make my credit card work?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

How can I change my apple ID from the APP store so I can update my app? my computer is stuck with an old email and won't let me change it..

Hello, Im trying to upgrade Imovie and whatever app are about to update in the future, the problem is the my Imac is stuck with an old email on the APP store. I try to change it and nothing happen, when I put my apple ID it send me to change the password and what Im trying to do is to put my new email in the system so would be able to update my computer. You know when you press the update button a little box drop with your email and all you have to put is your password thats where my old email is stuck pls someone help me with that little problem i'll appreciate it... thanks

An Apple ID isn't necessarily "linked" with your email other than for recovery reasons. So, as long as you know the Apple ID password, an old email isn't catastrophic. Apple ID != e-mail.
Now, if it's really bugging you and you really want to change it, if you log in to http://appleid.apple.com and change your primary email address, this should update your Apple ID. There will be a couple hoops involved with this (i.e. verification of email change by sending email to rescue/alternate email. Alternate email can't be the same as the new primary. The new primary can't have ever been used as/with an Apple ID. etc...).

PR can be changed after PO created from the PR(by adopting) .. need to stop

Dear experts,
In our current system PR can be changed after PO created by adopting the PR. How can i block this change.
Kindly help
Regards,
Zusen

Badruddoza Zusen wrote:
Hi
>
> Thank you for your reply.
>
> I have set message 06608 as error but problem still is there. After creating a PO 4500013405 w.r.t a PR 100018999 and can add new line in PR 100018999. How can i stop this..
>
> Kindly help.
>
> Thanks and regards,
> Zusen
Is that really a problem? the second item has has the same PR number. but if you look at the technical structure of the purchase requisition table, then this table does not have a header table and no item table, it is just one table --> EBAN
if you create a second item, then you have the same PR number but different item number
otherwise
you have a different PR number but same item number.
It is really just one field which is different.
And 06608 message prevents the change of the item which is already used in a PO.

How can i change my email account from the update program?

I have the update icon on the bar of my mac, and it keeps asking me for my email verification but my email account is misspelled.

Verify Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Can´t change alias to use from within iPhone 4 Mail app

According to the iPhone 4 users manual to choose the alias you want to use when sending an email, it´s as simple as to tap de "from field" to select the desired alias.
The problem, in my case, is that the "from field" doesn´t appears, so I can´t tap on it and I cannot see from within the iPhone 4 Mail application wich alias I am supposed to be using.
I´ve changed my default acount to use in Mobilme and it works fine there but it uses another different from the one I choosed in the iPhone 4 (though it changed the alias I had before).
Any suggestions on what to do ???

See if you can get Skype to work.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How can i paint a solid color from the color pallet to a new art board

Hi
Can any one teach me how i can just paint or pour a solid color in an blank art board.
Steve

Draw a box with your Rectangle Tool the size of your art board and fill that with the color you need.

I can not change background mountain lion from the Finder

Hi, my problem is:
when I boot the pc I can change screen-> right click-> change desktop background.
But later if I want to change it again this does not answer. If I try twice changes the background
I do not know if the problem is my computer or failure of mountain lion. In Lion or Snow didn´t happen.

Are you using an external display? I've had this happen with an external display. I reset PRAM and all was sell.
Bryan

Programming the BACK button from a list

Hi,
I have a program that utilizes a selection-screen, a customized screen, and a list (leave to list-processing) respectively. What i want to know is how to enable the back buttom from the list to immediately go to the selection-screen instead of the customized screen (which comes before the list).
at user-command doesn't seem to work... any advice is welcome. Thanks!

hi winnie,
this documentation may solve your problem..
To pass control from the dialog processor to the list processor, you must include the following statement in one of the dialog modules:
LEAVE TO LIST-PROCESSING [AND RETURN TO SCREEN <nnnn>].
You can include this statement in either the PBO or the PAI event. Its effect is to start the list processor and display the basic list after the PAI processing of the current screen. The basic list contains any list output from all PBO and PAI modules that have been executed up to that point.
If detail lists are defined in the corresponding event blocks of the ABAP program (AT LINE-SELECTION, AT USER-COMMAND), user actions on the basic list will lead to the detail list, and further interaction will lead to further list levels.
You can leave list processing in two ways:
By leaving the basic list using the Back, Exit, or Cancel function.
By using the following statement during list processing:
LEAVE LIST-PROCESSING.
In both cases, control returns from the list processor to the dialog processor. Each time this occurs, the entire list system is initialized. Any subsequent list output statements in PBO and PAI modules apply to an empty basic list.
By default, the dialog processor returns to the PBO processing of the screen from which the list processor was called. The optional addition AND RETURN TO SCREEN allows you to specify a different screen in the current screen sequence at whose PBO event you want to resume processing. In particular, the statement
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
can be used to end the current screen sequence and return to the point from which it had originally been called.

Recommended Procedure
If you want to display lists during screen processing, you should create a separate screen for each list system that you want to call. This screen encapsulates the creation and display of the basic list. It can then be called from anywhere in the program using CALL SCREEN.
The actual screen mask of this screen can remain empty. You do not need any PAI modules, and only a single PBO module. In the PBO module, you define the basic list of the list system and call the list processor.
First, use the
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
statement to call the list display at the end of the screen, and to ensure that, after leaving the list, you return to the point from which the screen was called.
Next, set a GUI status for the list; for example, the default list status SPACE or a list status of your own.
Use one of the following statements to ensure that the empty screen is not displayed:
SUPPRESS DIALOG.
or
LEAVE SCREEN. Instead, the list is displayed immediately at the end of the screen.
Now define the entire basic list, and place any necessary data in the HIDE area.
If you want to process user actions on the list, you need to define the relevant event blocks in your ABAP program. If you want to call more than one independent list system in the program, you must ensure that you can tell them apart in the list event processing. You cannot do this using SY-DYNNR, since the container screen for a list is always number 120. Instead, you could assign a different GUI status to each list, and distinguish between the list systems using the value of SY-PFKEY, or you could place some unique information in the HIDE area of each list system.
Example
REPORT demo_leave_to_list_processing .
TABLES sdyn_conn.
DATA: wa_spfli TYPE spfli,
 flightdate TYPE sflight-fldate.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100.
CALL SCREEN 500.
SET SCREEN 100.
ENDMODULE.
MODULE call_list_500 OUTPUT.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS space.
SUPPRESS DIALOG.
SELECT carrid connid cityfrom cityto
 FROM spfli
 INTO CORRESPONDING FIELDS OF wa_spfli
 WHERE carrid = sdyn_conn-carrid.
 WRITE: / wa_spfli-carrid, wa_spfli-connid,
 wa_spfli-cityfrom, wa_spfli-cityto.
 HIDE: wa_spfli-carrid, wa_spfli-connid.
ENDSELECT.
CLEAR: wa_spfli-carrid.
ENDMODULE.
TOP-OF-PAGE.
WRITE text-001 COLOR COL_HEADING.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE sy-lisel COLOR COL_HEADING.
ULINE.
AT LINE-SELECTION.
CHECK not wa_spfli-carrid is initial.
SELECT fldate
 FROM sflight
 INTO flightdate
 WHERE carrid = wa_spfli-carrid AND
 connid = wa_spfli-connid.
 WRITE / flightdate.
ENDSELECT.
CLEAR: wa_spfli-carrid.
This example switches to list processing during the screen processing for screen 100. Screen 100 has a single input field - the component CARRID from the ABAP Dictionary structure SDYN_CONN.
Do contact me if you have any problem
and do reward the points if you think this documentation is of your help to you.
Thanks and regards,
kunal.

The new operating system changed the background color of the photos app from black to white. How do I change the color back to black?

The new operating system (IOS 7) changed the background color of the Photos App (Camera Roll) from black to white. How do I change the color back to black?

You can't. Sorry.
http://www.apple.com/feedback/
You can tell apple that you'd like it and see if they respond....eventually. (you don't get responses from your feedback mails but they have been known to issue changes that users have asked for, such as the ability to mass delete apps)

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

Sorry I'm so late responding; I've been away.
http://support.apple.com/kb/TS3694#error1611
The error means that your antivirus or firewall is blocking the update process.

Can i change the back Color from the IPhone 5c

Similar Messages

Maybe you are looking for