Can i change the Domain membership of Vcenter server 6.0 ??

Hello All,
We have VCenter server 6.0 and we have joined the server to On-premise AD , call it as X.com
Also we have our cloud set-up and most of the applications are running on it , we have an AD in cloud, call it as Y.com, we are planning to decommission the on-primes AD and use the Y.com as the single domain name ,
All host in the VCenter can also communicate to Cloud,
we have all necessary connectivity and S-S VPN set up between On-prime to cloud, DNS and Network connectivity is checked and working fine.
Can i simply join the VCenter server to Y.com ??
Will that have affect on SSO and Webclient ??
should i perform any additional steps so that my current set up is not interrupted ?
any other method to perform this activity ??
Your valuable inputs are much needed. Thanks in Advance

Hi,
There are a number of options, I suppose it depends on the complexity of your vCenter. Before doing anything I'd recommend to backup:
- vCenter DB
- SSO configuration
- SSL Certificates
- Snapshot existing VCS (if possible).
So, changing you vCenter domain will ultimately cause an outage whilst you reboot the machine for this to happen. Afterwards, you will likely see issues relating to FQDN change (vcenter.X.com has now become vcenter.y.com). Ensure that you have proper DNS resolution setup for this move in place.
I would also make sure that you have your [email protected] credentials handy and working and that you create an extra Identify Source of y.com domain before proceeding.
Ideally, this would be something to try and test before proceeding if at all possible.

Similar Messages

How can I modify the domain of a comment server?

Acrobat 9 in Windows 7
Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
How can I change the properties of that server so future reviews use the FQN?
Jerry

You can't edit the server profile through UI.
The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
For deleting the profile, Go to "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
-Priyanka

Can I change the COMPUTER NAME of Windows Server ?

Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^y

Yes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

How can I change the logo of default application server

I am in 10g environment. Whenever I open my application in browser I see a splash screen "Oracle Application Server Form Services ...".
Can I change this splash screen with the my own.
I tried the following but it just removed the default one
# Forms applet parameter
splashScreen=D:\dev10g\my_splash.gif
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
Message was edited by:
Aasem

Yes, you can.
The GIF file must be under a directory where Oracle can read, like the %ORACLE_HOME%/Java directory. And you only specify the file name, not the full path.
# Forms applet parameter
splashScreen=my_splash.gif
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=OracleTony

How can i change regulatory domain C to A of access point

Recently my office got an access point - (AIR-CAP2602E-C-K9) which is not synchronizing with controller (AIR-CT2504-5-K9 )as it is in domain A , all other AP also in domain A. Now can i change the domain of access point or what is the possible solution to add new AP with controller ? is it possible to run both domain (A, C) at the same time with one controller ?

Migrating Access Points from the -J Regulatory Domain to the -U Regulatory Domain
The Japanese government has changed its 5-GHz radio spectrum regulations. These regulations allow a field upgrade of 802.11a 5-GHz radios. Japan allows three frequency sets:
•J52 = 34 (5170 MHz), 38 (5190 MHz), 42 (5210 MHz), 46 (5230 MHz)
•W52 = 36 (5180 MHz), 40 (5200 MHz), 44 (5220 MHz), 48 (5240 MHz)
•W53 = 52 (5260 MHz), 56 (5280 MHz), 60 (5300 MHz), 64 (5320 MHz)
Cisco has organized these frequency sets into the following regulatory domains:
•-J regulatory domain = J52
•-P regulatory domain = W52 + W53
•-U regulatory domain = W52
Regulatory domains are used by Cisco to organize the legal frequencies of the world into logical groups. For example, most of the European countries are included in the -E regulatory domain. Cisco access points are configured for a specific regulatory domain at the factory and, with the exception of this migration process, never change. The regulatory domain is assigned per radio, so an access point's 802.11a and 802.11b/g radios may be assigned to different domains.
For more information please refer to the link-
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/321930RN.html#wp111182

Interesting Presence issue and changing the domain

I've got an interesting problem that I recently posted about in a different discussion forum.
Basically I've got a presence setup. This is federated with an OCS. The OCS domain is something like company.com This is the same as the email domain, and the SIP uri's are sip:[email protected]
The issue is that when the presence server was set up, the proxy domain was set as something like cmp.local. cmp.local is the domain for the entire internal MS infrastructure. The problem appears to be that this conflicts with the internal domain. So when looking up in the directory instead of getting the OCS domain it gets replaced with the cmp.local. Functionally this results in the jabber client being unable to add federated OCS contacts from the directory as they just get added as internal jabber contacts.
I'm thinking of changing the domain on the presence server to something like jabber-cmp.local, i.e. a domain that doesnt exist. Once we migrate to jabber we'll change the domain again back to company.local so we can federate externally properly. Does anyone have any experience of doing something similar? Any pitfalls anyone can point out?

Federation can only be setup a few ways
- Intra domain (company.com   federated to im.company.com)
- inter domain (company.com federated to abc.com)
- Intra domain partitioned (Company.com federated to company.com)
You need to define this to make any of the with CUPS 8.6.4 (you should run latest and greatest).   Now, depending on which version OCS you have R1 or R2 is important as well.
Put the CUPS server in the domain you want it in. Some of the SIP paramenters can be pushed for Jabber 4 windows XML file IE:
msRTCSIP-PrimaryUserAddress
true
sip:>

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

How to safely change the domain controllers that Exchange use from Out-Of-Site into the In-Site ?

Hi Folks,
I'd like to know what's the best way to edit the Exchange Server 2007 entry
In-Site entries and removing the entries from Out-Of-Site safely without causing any downtime or problem with the workstations ?
From the MSExchange ADAccess Event ID 2080, I can see that the Domain Controllers that is currently used by Exchange Servers is all on the
In-Site lists which I need to decommission due to office building migration and downsizing, the workstations remain in the same building only the servers must go.
Current configuration:
Exchange Servers AD Site: HQ1 (for all roles)
Workstations AD Site: HQ1
Proposed configuration:
Exchange Servers AD Site: Prod-DC1 (for all roles)
Workstations AD Site: HQ1
Thanks.
/* Server Support Specialist */

Hi,
Steve's clarification is right.
From your description, you want to change the DC used by Exchange server. If I have misunderstood your concern, please let me know.
Please make sure the following things before setting the DC for Exchange:
1. New DC has its own IP in its TCP/IP as primary DNS server.
2. New DC is global catalog.
3. New DC has correct DNS settings in the MSDC folder.
4. Restart the Exchange active directory topology discovery service and watch the event viewer, there should be an event that discover both domain controllers. If this happens, then turn off the old DC.
Besides, topology information will remain in the system attendant service for 15 min, so the time to switch to the new one is about 15 minutes.
Hope my clarification is helpful.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Amy,
The Exchange Server has been rebooted couple of times but yes, all of the In-Site AD servers are still on not rebooted yet.
So in this case do you suggest me to demote the oldDC and turn off all of the In-Site DC/GC first and then reboot Exchange Server after wards one by one ?
/* Server Support Specialist */

How to change the domain in zee table

hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help me

Go to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement.

I just installed Lion OSX. Where can one find the "domain" for iWeb?

With Snow Leopard one could find the "domain" for one's iWeb in Admin+Library+application support+iWeb. When one changed computers, one simply had to save this domain and then put it in the right place in the new computer. Things have changed with Lion OSX - and I can't find the "domain" for my web site.
Anyone know where to look (Scripts?)
Thanks,
T...

The reason Apple has hidden the User/Library folder is that there is not longer any reason to get into it what with iWeb (and iDVD) being discontinued and no longer supported.
We now know iWeb, and iDVD, have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
If a site is published to a folder on the hard drive and then uploaded with a 3rd party FTP client to an ftp server subscriptions to slideshows and the RSS feed will be broken. If published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
The iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD.
This may be of some interest to you: Life After MobileMe.
OT

IWeb works, but I can't find the domain file!!!!

OK - this one has had me stumped for a few days now... I have iWeb (vs. 1.1.2 - from the '06 iLife). I need to find the domain file. It isn't in the home/library/app. support/iWeb folder. I didn't move it. I searched for it using command-F and using spotlight on my computer.
iWeb is to reset and start from scratch if there isn't a domain file on your hard drive. So I know it's there somewhere (at least, I think it is?). My site is there. I can publish. I can make changes, however I can't find the domain file to make a back up of it. I don't think that I made it invisible - could I have somehow done that? And if so, is it possible to find it? I believ the program only works if the file is named "domain" so I don't think that I could have accidentally renamed it.
Is there someone out there who can help me? I don't want to have to start from scratch and rebuild the websites.
Thanks for your input!

This is from Multisite's Technical Page:
Technical Information
While you don’t need to understand how data is stored to use Multisite for iWeb it can be helpful occasionally to understand what is going on behind the scenes. At a nuts and bolts level Multisite for iWeb stores all of its sites in your home folder’s Documents folder in a single package (which is really a fancy folder dressed up to look like a file) called “Multisite for iWeb Data.mfi.”
You can open that package like this.
Once you get your domain file straightened out I'd definitely get Varkgirl's Automator application to make frequent backups of that file. You can get it Varkgirl's iWeb Tips and Tricks site.

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Lelisa it is only necessary to connect to the internet periodically to receive updates and validate your membership. If you have an annual membership you can be offline for up to 99 days. You can find additional details at Activation & Deactivation Help.
I would also recommend reviewing Creative Cloud Help | Install, update, or uninstall apps which discusses adjusting the installation language.

WinXP computers can't join the domain

Hi, I'm setting up my first Xserve and I'm having troubles making WinXP machines join the domain.
With OS X and Win98 clients I have no problems with the tests accounts I have created, but with with WinXP machines I get the error that they can't Join the domain becouse Access is Denied. I don't think is a configuration error on the server's services or the WinXP boxes becouse I can join the domain and access the account for diradmin OK from the WinXP boxes, so it may be an account configuration problem.
Also the accounts have network home folders, don't know if this might also cause a problem, I did try with no home assigned and still got the same error.
Any help would be appreciated

Fixed the problem myself....
Creted a new account and dindn't move anything on it, nothing managed and nothing changed on the account windows tab.
Joined the domain with the diradmin account, and after the reboot used the new test user, logged in fine and home folder was mounted as a Network drive perfectly.
Hope this helps someone in the future

Where/How to change the domain?

Hello,
the domain of the application server has changed.
Where or how do I have to change the entries for the domain the application server is in?
For example:
old Domain:
myreportserver.olddomain.com
new domain:
myreportserver.newdomain.de
So, where and which entries do I have to change?
Thanks a lot.
Best regards.
Florian

Either, you can...
Use $ORACLE_HOME/chgip/scripts/chgiphost.sh to change the domain name
or
Create a virtual host where the ServerName use the new Server.domain that you wish.
In this forum you may find info for both ways, look for chgiphost and virtualhost.
Greetings.

Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

Can i change the Domain membership of Vcenter server 6.0 ??

Similar Messages

Maybe you are looking for