Can I Change The Equalizer For All 3,000+ tunes in iTunes At Once?

I just discovered the equalizer option and I am hoping that there is a command to change the tunes all at once. HELPPPPPPPPPPPPPPPP!!!!!!!!!!!
Dell   Windows XP  

I click edit and select all but I end up with a list highlighted in blue. What's the next step? I tried changing one while highlighted but it only changed the one I worked on.
Thanks for your help.
The simple answer to your question is YES, you can do
that.....BUT, be careful!! Changing the EQ and/or
Volume presets actually updates the headers in your
music files. So, by clicking Edit/Select-All, you
could launch a mass change, but you're talking about
3000+ updates. I would start off with a small batch,
then go larger as you gain confidence in the process.
A word to the wise......be careful.
Good luck and post back if your are successful.

Similar Messages

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • Can I change the settings for ALL songs in iTunes with 1 command?

    I'd like to set the volume for all songs to +100. Can I just select all songs and then change it to +100?

    Highlight all the songs in your library (ctrl+a, edit-->select all, etc.)
    Now right click one of the songs, making sure that all remain highlighted, and go to get info. Click Yes to the message that pops up. You should be able to adjust the volume in that window. Click OK when you are done. The volume should now be adjusted for all songs.
    btabz

  • HT1766 I have made the C drive on my computer very small, with the intention that all data would be stored on the D partition. Can I change the destination for my iPad backup to the D drive?

    I have made the C drive on my computer very small and try to put all the data on the D partition. Can I change the destination for my iPad backup to the D drive?

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24351688
    If not then you might be better off asking in the iTunes For Windows forum, you may be more likely to get better help there.

  • How can I change view options for ALL playlists?

    How can I change view options for ALL playlists? With one single click or trick?
    I have a lot playlists and don't want to change every single one of them separatly.
    Thanks for your help. (I use Windows 7)

    There's no FAST way I know of, which is what I think you mean.
    Only the painful SLOW way of one-by-one.
    You could make a new playlist from the main library after you've set the columns up as you like.
    Go to an existing playlist that doesn't have the columns you want, and select all.
    RIght-click > Add to Playlist and send them to the new playlist.
    That's still one-by-one and only works with static playlists, not smart ones.

  • How can I change the settings of all instances of a particular effect?

    I've applied the same color correction effect to a lot of clips in the timeline. Now I want to fine tune the color correction (same setting for all clips still). How can I change the setting of all instances of the color correction effect without going into each clip manually?
    Looking forward to your thoughts on this!! Go on and save my cold winter editing day ...

    I was first hoping for File> New > Adjustment layer, but it's always greyed out. I thought that would create an adjustment layer, maybe I'm misunderstanding something? Anyway, if I create a black video stump and then right click it and choose "Adjustment layer", it will turn into one, and everything works as it should with that. If the black video become adjustment layer is placed on a video track atop my video, and I add for example color correction to it, it will be applied to the videos below.

  • On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

    On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

    You can set the default duration of stills but you have to do it before you start the project. 
    iMovie is not really suitable for stop motion videos and iMovie 10 is worse than iMovie 9 because the minimum still duration is not really controllable as you have found.   I don't have experience of making such videos but there are 3rd party apps which appear more suited to this, for example http://www.macworld.com/article/1146623/stop_motion_Mac.html
    mentions some of them, though its a bit old and you may be able to find more up to date information.
    Geoff.

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    Note: @mac.com and @me.com Apple IDs can not be renamed.  If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
    From here  >  http://support.apple.com/kb/HT5622?viewlocale=en_US
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • How can i change the font for a theme in iDVD.

    how can i change the font for a theme in iDVD. For example; the text of the rotation theme in the background of the movie. i want to change the font of the rotating text there. How do i do this?

    Have a look at this: http://hints.macworld.com/article.php?story=20080130180258257

  • How can I change the settings for being timed out (I don't want to be timed out ever)

    How can I change the settings for being timed out (I don't want to be timed out ever)?

    I am sorry but this isn't something that you can set. The system has timeouts built into the code.
    Andrew

  • How Can I change the Authentication for this Dynpage

    Hello ,
    I have created a rss feed in special Dnypage.   When I try to connect with rss reader  to dynpage it occurs an error 500.  The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
    How Can I change the Authentication for this Dynpage ? I need a LogonScreen
    RSS URL:
    /irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

    Hi ,
    sry the entry in xml does not help. No Logon Prompt
    <?xml version="1.0" encoding="UTF-8"?>
    <application>
      <application-config>
        <property name="SecurityArea" value="NetWeaver.Portal"/>
        <property name="Vendor" value="xx.com"/>
        <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
      </application-config>
      <components>
        <component name="uwlquickstarter">
          <component-config>
              <property name="SafetyLevel" value="no_safety"/>
            <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>   
          </component-config>
              <component-profile>
                   <property name="AuthScheme" value="default"/>
              </component-profile>
        </component>
      </components>
      <services/>
    </application>

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

Maybe you are looking for