Can i change the field position in a Form using Oracle Forms Personalization?

In my form a field is appearing at the top of page.I want that field to appear at the bottom of page.Can i achieve this using Forms Personalization?

Yes, you can.
Action: Property
Property Name(s): X_POS, Y_POS
Value: If following standards you should specify X_POS in .01 increments and Y_POS in .25 increments.
You can play around with help -> diagnostics -> properties -> item to interactively set the value for the X and Y position until you get it on the spot you want; once you have the right values set the personalization rule to set the property values accordingly.
Beware that this is done for individual items, so if you need to make space and shift other items you'll have to set the properties for each one.

Similar Messages

Can not change the field property - 10gR2 reports crashing on Linux :(

All I want to do, is to change one field's property from NUMBER to DATE in the property palette. It does not allow me to do it (not east like forms). I can not change the field property - 10gR2 reports keep crashing on Linux :(
I don't know if this is a Linux specific iDS issue, or a generic one.
What are the proper steps to change one field (in my query, the field name is ptime, it was defined as a number field originally, and now I need to change it to DATE and apply the proper format mask). The matching database field definition was modified from number to date.
very frustrating...
Any input is appreciated.
Message was edited by:
zaferaktan

nop, did not change anything in the select statement at all. Just selected the related query under the data model (in the navigator), then selected the related query from within the property panel, connected to the db, then from the related navigor menu selected compile all, when the related query was highlighted (selected). Then I saved it, checked the groups, and bingo - the datatype was changed from number to date. Then I went to the related object under the page layout and applied the format mask (that was another funny story). And it worked. It is not as flexible as the forms for sure - pain in the a.. And I still don't know why Reports Builder keeps crashing on Linux - have no problems with Forms Developer on Linux at all. It is a certified RH platform with all the required libs, rpms, etc installed. I am certain it is not an installation issue. Maybe I should check Metalink and apply if an iDS 10gR2 patch exists for reports.

Can you change the field names in the address book?

Can you change the Pager field name to read 2nd cell?

No.
This add-on https://freeshell.de//~kaosmos/morecols-en.html allows you to modify the labels of the 4 custom fields of the contact card

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

Where can I change the buffer size for LKM File to Oracle (EXTRENAL TABLE)?

Hi all,
I'd a problem on the buffer size the "LKM File to Oracle (EXTRENAL TABLE)" as follow:
2801 : 72000 : java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in D:\OraHome_1\oracledi\demo\file\PARTIAL_SHPT_FIXED_NHF.dat
Do you know where can I change the buffer size?
Remarks: The size of the file is ~2Mb.
Tao

Hi,
The behavior is explained in Bug 4304609 .
You will encounter ORA-29400 & KUP-04020 errors if the RECORDSIZE clause in the access parameters for the ORACLE_LOADER access driver is larger than 10MB and you are loading records larger than 10MB. Which means their is a another limitation on read size of a record which is termed as granule size. If the default granule size is less then RECORDSIZE it limits the size of the read buffer to granule size.
Use the pxxtgranule_size parameter to change the size of the granule to a number larger than the size specified for the read buffer.You can use below query to determine the current size of the granule.
SELECT KSPFTCTXPN PARAMETER_NUMBER,
KSPPINM PARAMETER_NAME,
KSPPITY PARAMETER_TYPE,
KSPFTCTXVL PARAMETER_VALUE,
KSPFTCTXDF IS_DEFAULT,
KSPPIFLG MODIFICATION_FLAG,
KSPFTCTXVF VALUE_FLAG
FROM X$KSPPI X, X$KSPPCV2 Y
WHERE (X.INDX+1) = KSPFTCTXPN AND
KSPPINM LIKE '%_px_xtgranule_size%';
There is no 'ideal' or recommended value for pxxtgranule_size parameter, it is safe to increase it to work around this particular problem. You can set this parameter using ALTER SESSION/SYSTEM command.
SQL> alter system set "_px_xtgranule_size"=10000;
Thanks,
Sutirtha

How can i change the source code of current date in oracle reports

Hi All,
How can i change the source of the current date to the sysdate of the database in oracle reports. I have more than 300 reports. is there any way to change quickly with opening each reports. I am working on reports11g on windows enviornment.
Thanks in advance.

benz wrote:
Hi All,
How can i change the source of the current date to the sysdate of the database in oracle reports. I have more than 300 reports. is there any way to change quickly with opening each reports. I am working on reports11g on windows enviornment.
Thanks in advance.You have to use Reports Trigger named BEFORE PARAMETER FORM and write the following sql
select sysdate into :Parameter_name from dual;
give your format mask at Parameter_name.
Hope this will help you
If someone's response is helpful or correct, please mark it accordingly.

Can you change the quality of YouTube videos? Using the YouTube application?

I have a iPhone 4s and I was just wondering can you change the quality of YouTube videos using the intergrated app. Because I have a bad internet connection and I would like to watch YouTube videos without the trouble of going into safari and doing it that way.

The dedicated app is going by the wayside with iOS 6, so a good time to get used to accessing YouTube with Safari only unless you don't plan on installing iOS 6 or unless YouTube decides to provide an app for free or a paid version via the App Store for iOS 6 and later.

Can I change the administrator password on Snow Leopard using Tiger discs

Hi, I had a fault with my mac and the o/s had to be reinstalled. The shop put Snow Leopard on my mac and I changed the password which I later forgot. My mac instructed me to input the install discs etc but I only have my original Tiger Install discs. I rang the shop but they say they are not allowed to change the password but that I can do it with my old discs.
I tried to reset it but it wouldn't work and on only the first occasion when I restarted with the disc and by pressing C on reboot etc did it launch into the 'select language' etc. Now every time I try, it just starts normally.
Is there any way I can change the administrator password on Snow Leopard using my Tiger discs? thanks

Why didn't the "shop" give you the Snow Leopard system discs? You need those to troubleshoot. Especially if you need to use Apple's Hardware Test. Strange.
http://support.apple.com/kb/HT2558
http://docs.info.apple.com/article.html?path=Mac/10.6/en/11627.html
Check Knowledge Base for other solutions.

Can we change the bound location of an operator using OMB?

Hi,
I'm trying to change the location of an table operator using the following code:
OMBALTER MAPPING 'MAP_NAME' MODIFY OPERATOR 'TABLE_TEST' SET PROPERTIES (database_link) VALUES ('PROJECT1/SOURCE1/TEMP_TABLE3')
OMBCOMMIT
OMBPlus tells me that the command ran successfully. But if i take a look on the design center, the change didn't occur. The old location for the operator remains.
Am i using the right property type? database_link?
Thank You!
Filipe

What you've run only change the link location. It doesn't change the bound location.
I've write an OMB scripts to automate the changing of bound location within different project .
set OMBPROMPT ON
OMBDCC
OMBCC '/'
set projects [OMBLIST PROJECTS]
puts -nonewline "Please enter the Project Name ($projects): "
gets stdin projectName
set path [lindex [OMBDCC] 1]
OMBCC '$projectName'
set modules [OMBLIST ORACLE_MODULES]
puts -nonewline "Please enter the Module Name ($modules): "
gets stdin moduleName
puts "================"
puts "Finding on Module $moduleName"
set path [lindex [OMBDCC] 1]
set no_mod 1
OMBCC '$path/$moduleName'
set no_map 1
puts "Find $moduleName"
foreach mapname [OMBLIST MAPPINGS] {
foreach klname [OMBRETRIEVE MAPPING '$mapname' GET OPERATORS] {
set bname [lindex [OMBRETRIEVE MAPPING '$mapname' OPERATOR '$klname' GET BOUND_OBJECT] 1]
set oname [lindex [OMBRETRIEVE MAPPING '$mapname' OPERATOR '$klname' GET BOUND_OBJECT] 0]
# PTI_DW_TST is the name of project orig bound
# PTI_DW is the name of project destination bound
set result [regexp {^(/PTI_DW_TST)+} $bname match]
if { $result == 1 } {
set myresult [regsub {^(/PTI_DW_TST)+} $bname "/PTI_DW" new_bname]
#puts "$klname ($oname) : $bname => $new_bname"
OMBRECONCILE $oname '$new_bname' TO MAPPING '$mapname' OPERATOR '$klname' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
puts "Reconcile Mapping $mapname change $bname to $new_bname for operator $klname with type $oname"
incr no_map
OMBCC '/'

Can we change the fields of database unique index in a customised table?

Hi all..
I want to know that can we create or change or delete the database unique index of a customized table?
In my case, there is a customised table with 4 primary keys with all the records to be maintained thru transaction code SM30.
There is database unique index maintained for this table which has 2 fields. These 2 fields are out of the 4 primary fields of the table.I hope I have made myself clear!
Now when I am trying to insert a record in the table it give me a short dump.( It says duplication of records is not allowed)
The reason being that the new record that I am trying to insert in the database table has those 2 fields for which the unique index is maintained is the same as an already existing record.And the other two fields are different from the already existing record.So overall the combination of the 4 primary fields is different.
Please tell me how shall I proceed now?
I also tried to change the Unique index but it is asking me some kind of authrization(You are not authorized to make changes (authorization object S_DEVELOP)).Also I am not sure whether changing the unique index is feasible or not.?
Thanks.

hi
I think you will not be able to do unique indexing withou the help of primary keys,so use all the primary keys into the table field selections and and then create indexing otherwise dupilication of keys can occur. if you are not able to keep the primary keys then go for non unique key indexing,where you have to add the client field and the any keys of your wish.

Can not change the field BSEG-REBZG on the document line item

Hi,
I am not able to change the invoice reference field on the document already posted. I have tried config. settings on change document line items but unsucessully.
The problem is with the field BSEG-REBZT, if the field value is "V" RESIDUAL item I am not able to change it but if this field value is "Z" I am able to change it.
Can anyone who have come across this situation please guide me on this.
Thanks,
Srini

Hi Eli,
Thanks a lot for your resolution. I have assigned points to you.
Unfortunately my problem has not been solved inspite of implementing the so mentioned SAP notes.
Do we need to do anyother settings? Can you please guide me?
Thanks,
Srini

I can't change the field status of Tax section in MIRO transaction

Hello, I need to change to visible the field status of RTAX1U12-FWBAS, RTAX1U12-HWSTE and RTAX1U12-HWBAS of Tax section in MIRO transaction. In table settings, administrator option of that section I can change them, but when I save the variant the system do not save the settings. There is another transaction where these field status are maintained? I think that in another part these fields have the status "Invisible".
Best regards,
Alfredo Del Portillo

Hola Alfredo,
The table control for taxes in MIRO cannot be changed by the administrator function like other table controls.
Which columns are displayed or not is decided by the program dependend on several parameters.
The tax base amount is changeable or not is controlled by a setting in FI customizing:
IMG -> Financial Accounting -> F.A. Global Settings -> Tax on Sales/Pur
-> Basic Settings -> Change field control for Tax base amount
I hope the above information answers your inquiry.
Xalu2
Mauro

Can I change the Default Position of a JColorChooser Dialog Box???

I am working on a drawing application where I am using a button that launches a JColorChooser dialog to allow a user to select a color which. I have tied this button to the JColorChooser using the source code below to reset the color based on the user's selection. This all works fine. However, when the JColorChooser comes up, the dialog comes up right in the middle of the drawing area and erases any portion of the drawing that the dialog box overlaps with, which having my luck is more or less right in the middle of the JPanel where I am doing the drawing. My question is can I tell the JColorChooser to come up somewhere else in the user interface by offsetting it from the actual application somehow? I am using a JFrame to add all of these components to (the color choose button and the drawing area) and wonder if there is a way to tell the JColorChooser dialog not to come in the default location. Any help that anybody could provide would be greatly appreciated. Thanks!
Kevin
pickColor = new JButton( "Choose Color" );
pickColor.addActionListener(
new ActionListener() {
public void actionPerformed(ActionEvent event)
color = JColorChooser.showDialog(
ColorPicker.this, "Choose a color", color);
if ( color == null )
currentColor = Color.RED;
else
currentColor = color;
);

JColorChooser has a method createDialog() that lets you create (rather than
merely show) a dialog containing your colour chooser.
If you use this method you can position the dialog wherever you want. The
dialog inherits the Window methods for positioning - eg
setLocationRelativeTo(Component c).

Can you change the fields in add field under contacts?

does anyone know how to change fields names?

Tap on the field name while in the "Edit" mode, pick what you want or add your own custom label.

How can I change the background color in text box using RGB format

Can some one tell me if Mac Pages (version 5.0) allows users to customize the background color of a text box using RGB color format? It appears that the text color can be changed using RGB but background color is limited to a few standard colors. Thanks

They are just sample swatches, use the Color Picker to choose anything you want.
Peter

Can i change the field position in a Form using Oracle Forms Personalization?

Similar Messages

Maybe you are looking for