Can I change the reort total: text in the summary row in a report region?

Hi all,
This might has been asked before, I tried searching the forum but couldn't find an answer. In the report attribute, if I tick the sum checkbox then run the page, the last row would give me the summary numbers which is what I want. However is there a way I can change the "report total" text in the last row of the first column?
Thanks very much for your time.
Pete

Hello user9546327,
I had the same problem, until I realised that the text seems to be printed under the first column of the report. If that one is a hidden column, the text won't be printed in the report.
Solution:
In the 'Report Attributes' tab, move the first visible column (= attribute 'Show' is ticked) to the top of the report columns.
Best regards,
Sabine

Similar Messages

  • Changing the Condition type Text in the Purchase Order

    Hi SAP,
    Hi,
    We have a requirement where by we need to change the Description of the condition type text in the Purchase order.
    The condition type is a entered at item level.
    Normally this description comes from the Condition type Definiton i.e., T685T-VTEXT.
    can any one of you suggest a User exit or a method where by we can change this text at PO.
    Has any one of you came across such situation before. if so please provide me with your inputs.
    Thanks
    Best Regards
    ShitalD
    Edited by: Shital Deshpande on Feb 21, 2010 1:07 PM

    Hi,
    I think it is a config setting..Please check with your functioal consultant regarding the same.. I won't suggest to change the standard SAP table T685T but you can keep it as last option .
    From SPRO you can follow the below path
    Sales and Distribution->Basic Functions -> Pricing > Pricing Control -> Define condition types.
    Regards,
    Nagaraj

  • How to get grand total text  in the last column of reuse_alv_grid_display ?

    Hi,
    Experts,
    I am able to get the subtotal text but i am not able to get the grand total text please pass some code or idea on it.
    ex:
         2510    gopi       10
         2511   gopi        20
    subtotal                 30
         2521    anand    20
         2522    anand    10
        2523     anand    50
    subtotal                 80
         2512   vikram     30
    subtotal                 30
    (blank----)              140.
    Here i want to get text as 'COMPANY TOTAL'. by using REUSE_ALV_GRID_DISPLAY FM.
    Thanks,
    Shabeer ahmed.

    Hi,
      you can get the 'COMPANY TOTAL' by using the following code:
      LOOP AT i_main INTO w_main.*   Storing the Total text need to be displayed in
      ALV
        w_final-total      = 'COMPANY TOTAL'.
        w_final-field1   = w_main-field1.
        w_final-field2    = w_main-field2.   
        w_final-field3   = w_main-field3 .  
       APPEND w_final TO i_final.  ENDLOOP.
    Regards,
      Santosh

  • May I know how to change the color of texts inside the indicator box?

    Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
    In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
    Thank You for your attention!!!!!!

    Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
    The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    TextColor.vi ‏18 KB

  • How can I separate the "Icons and Text" of the browser control buttons (Back, Forward, etc.) from the Icons on the Add-on toolbar?

    At home, this is not an issue. I don't know why it's different here at work--same installation, same settings (as far as I can tell).
    Windows Vista
    Firefox 7.0.1
    Status-4-Evar installed to turn add-on bar into a status bar
    I have a NoScript add-on icon in the corner, which works fine. If I add a GreaseMonkey icon from the Customize menu, the "Icon and Text" appears for that icon, like the Icon and Text from the browser controls (Home, stop, etc). Other add-on icons also show Icon and Text (S4E, for instance). NoScript is the only one I've found so far which collapses down to just an Icon.
    This leads to the status (add-on) bar having a much larger height than I like. Essentially what I want is for only the Icon to appear in the Status bar (Add-on toolbar), while keeping Icons and Text in the Browser controls. My current workaround is simply removing the other add-on icons from the status (add-on) toolbar, but that takes away the ease of toggling and setting options.
    Please tell me if I can provide you with anything else, and thanks for your help.
    Edit: I've got some screenshots to show what I mean.
    [http://i41.tinypic.com/ftek9s.jpg desired behavior]
    [http://i43.tinypic.com/1z6a4h3.jpg problem when icon is added]

    Surely there must be some UserChrome.css that will solve this problem. Something like this:
    /* Remove text titles for icons in add-on bar */
    addonbar .button-text {
    visibility: collapse !important;
    Unfortunately that does not work. I probably have the button text item name wrong (there is a pound sign before addonbar but it doesn't show in this posting).

  • When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

    i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

    Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
    Ideal is to separate your system from your data.
    You should always have bootable backup / clone of your system
    Don't use a green drive for system or data though.
    When you are done cloning system and/or data, remove the old original and keep as backup.
    Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
    Using Cloning as a Backup Strategy
    Carbon Copy Cloner 3.4.1 
    http://www.bombich.com/software/updates/ccc-3.5.html
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html 
    How to relocate system and user data to another drive:
    http://support.apple.com/kb/HT4337
    By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

  • Can you put line break in text in the data box when creating a chart.  i.e. if you have a bar chart

    Can you put line break in text in the data box when creating a chart.
    i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
    Thanks

    http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
    See "Enter labels"

  • How can I change my Profile photo or edit the thumbnail?

    QuestionHow can I change my Profile photo or edit the thumbnail?
    AnswerThere are a couple of different ways to change your profile photo or thumbnail image on Tagged.
    Here's a quick How-to video that shows you how to change your profile photo
    If you wish to change your profile photo, follow the instructions listed below:
    Hover your mouse over 'More' in the top Nav bar and select Photos.
    To use one of your previously uploaded photos as your profile photo, place the cursor over the photo you wish to use, and click the small green “#1” box when it appears
    If you wish to use a new image as your profile photo, upload the image to your photo gallery, and then click the small green “#1” box on the photo
    If you are viewing one of your photos individually, you can also set it as your profile photo by hovering over it and clicking the same green "#1" button.  You may also edit the caption and comment on your photo in this view
    You can also change your profile photo by doing the following:
    On the Navigation bar click Profile and select the Edit Profile link to the left of your Profile picture.
    To upload a photo locally from your computer, click the “Browse” button, select the image you wish you use, and then click “Upload”.
    To upload a photo using an image URL address, click the “Add from image URL” link, paste the URL address into the field, and click “Add Photo”.
    To use a photo from your gallery, click the “Use one of my photos” link to open a thumbnail gallery of your uploaded images.  Click on a thumbnail to set that image as your profile photo.
    After selecting a photo, you can alter its thumbnail by the marquee box by dragging the “anchor” points of the box.  When you are finished, click "Save Thumbnail"

    HELP! I was fooling around with my profile pic and selected and saved a cropped thumbnail. I hate it, and I haven't been able to figure out how to return my thumbnail to just a mini-version of my full profile pic. I've even re-up-loaded a copy of the original photo, with a different file name, but Tagged automatically crops it to the same thumbnail.  Is there any way to return my thumbnail to just a mini-version of my whole pic?  Thanks for your help :~)  

  • I have iphone 5 can i change it from apple and pay the difference bettween both value

    i have iphone 5 can i change it from apple and pay the difference bettween both value

    Ask your retailer.  At worst, you can sell your iPhone 5 independently (of Apple and your retailer) and separately purchase the later model.

  • Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone

    Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone

    There should be a blue link to your rescue e-mail there. If not, you will need to contact iTunes support. See this article: http://support.apple.com/kb/HT5312

  • I can't change my Desktop Background anymore, Used The Diptic app to create a collage and now i cannot change my desktop picture,  on Mac Book pro

    I can't change my Desktop Background anymore, Used The Diptic app to create a collage and now i cannot change my desktop picture,  on Mac Book pro

    You can't go to System Preferences>Desktop&Screen Savers and change the display? Try it and see. I've never seen that problem.
    Clinton

  • I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion

    I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?

    I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
    Now all is working.
    Thanks,
    B.

  • Hey ' I have hAd my iPhone 5s for a year now ' and can't remember my iCloud password ? And can't change it from my phone or the apple website? Phone hasn't been backed up for 32 weeks ? Any help on what I should doo!?

    Hey ' I have hAd my iPhone 5s for a year now ' and can't remember my iCloud password ? And can't change it from my phone or the apple website? Phone hasn't been backed up for 32 weeks ? Any help on what I should doo!?

    Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com. Click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

  • Append hyphen automatically after the wrapping of text in the dimension field

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    I want to Append hyphen automatically after the wrapping of text in the dimension field.
    e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
    Thanks in advance,
    Nita

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    Thanks for your input.
    Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
    A  B  C
    1  2  3
    4  5  6
    (you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
    Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
    I wonder if there would be a way to do the things dynamically.
    Thanks in advance,
    Nita

Maybe you are looking for