Can I change the resolution of a clip in a multicam project?

I am half-way through editing a project in Premier Pro CC and have JUST noticed that one of my four clips is 1440x1080 whereas the other three clips are 1280x720. Is there a way to scale down the one clip to match the others in the existing project? I welcome any suggestions on how to correct this. It would be nice to not have to start the edit over if possible. This whole project has been a challenge from the beginning... mixed formats, spanned clips, nested sequences, not to mention the differences in multicamera editing in this newest version of PP. Thanks in advance!

Thanks for your reply. I don't think the CC version works that way. I've tried it several times and it just doesn't open like in earlier versions. It only shows the one single video and audio track. 
Sent from my T-Mobile 4G LTE Device

Similar Messages

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • How can I change the speed of a clip if the speed slider is missing?

    I have read several other threads on this topic and they have not resolved my issue. I have a single clip I would like to adjust the speed for. When I click on "Clip Adjustments," the "Inspector' window only shows duration. Changing the duration does not make the closing credits roll more slowly. The clip is already part of my project, so I have no idea what else to try.
    I'm very grateful for assistance.
    Thanks.

    Ok, well you won't get a "speed scale" indicator when editing a title clip. You can only adjust duration. Now, is there music attached to the title clip? Are you adjusting the TITLE TEXT box ONLY? Try adjusting the clip BELOW Title Text box 1st, then Title Text clip.  Is the Title attached to your own video OR is it one of iMovie's default Titles??

  • How can I change the resolution of one monitor in a dual monitor set up?

    I'm trying to help someone set up an extended desktop using two monitors connected to a mac mini. One monitor is at the maximum resolution, but the other is not, and thus feels enlarged or zoomed in. I know a higher resolution is possible because the monitor has a button menu that shows a higher resolution, but it seems to be disabled - as I cannot select the maximum.
    Also can't seem to change it under the mac mini's display preferences.
    Any suggestions? We would really appreciate it.

    This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display
    The HDMI connection does not support higher than 1920X1200
    What resolutions are running now and on what connection and what is the grayed-out resolution?

  • How can I change the resolution of a display connected to my iPad 3 via VGA?

    I have been looking for this for almost an hour now. Google doesn't help and the preferences of the new iPad 3 are just crap, sorry. Why can't you search through the preferences? There's really plenty of room for improvement there.
    The display is a 1920x1200 and I only get 1024x768 at maximum, even though the new iPad 3 should be able to display way higher resolution. Sorry Apple, but this *****. What also ***** is that I can't copy my Apple-ID passwort via cmd+C and cmd+V in the browser login. Costs me 20 - 30 seconds every time I have to put it in. My time is valueable to me, but it seems not to Apple!

    Hey James, thanks for your reply. You're making a really good point there. I guess a lot of users will probably behave the way you suggest in your reply. For me, I try to have the most secure passwords possible and therefore use an advanced software like KeePassX for the job. It's a password safe that has a strong master password and from which I copy the passwords depending on the site I visit at the moment.

  • ZBook 14 - Can't change screen resolution after update

    After I installed some software updates the Laptop was suggesting me, my screen resolution went suddenly from 1900x1200 to 1200x720 after reboot, and it doesn't let me change it, not even to a smaller resolution. I am quite frustrated, because I will need the computer next week for visualization works and I really need the display working well. 
    It doesn't let me change the resolution. The display and graphics drivers are up to date and working properly, according to the device manager. I made a system recovery, but that just made everything worse although the resolution thing worked again, I had to run a startup repair several times before my laptop would boot propery again. This didn't solve the issue, since the display drivers weren't working properly (videos were being visualized very poorly) and even after updating them the computer wouldn't start up again, so I had to made another system recovery and now I am back to the point where I can't change the resolution and is starting to be really frustrating.
    Thanks for any help anyone can offer.

    Hello @hellmet,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your notebook computer is not able to change its display settings, and I would be happy to guide you towards a resolution!
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
    I hope this helps!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

    I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
    I am also providing you with a screenshot of what appears! I need photos on my iPad2
    Message was edited by: angana

    You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
    You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

  • I am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends.  i have tried changing the resolution but that doesn't work.  any suggestions?

    i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends.  i have tried changing the resolution but that doesn't work.  any suggestions?

    brilliant
    google chrome works where safari doesn't on my macbook air.  many thanks
    i now have an embarrassing qu.  have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short.  i have tried to extend it with the arrows in the bottom corners but it makes no difference.  any ideas?

  • Can I increase the resolution in a jpg created from an imovie clip?

    Can I increase the resolution in a jpg created from an imovie clip? I've done the steps to create/extract a "still" from an iMovie clip (which started as a small clip in iphoto). I did the steps of creating the freeze frame, and then doing a "screen shot", but the resolution is only 97 kb, so it won't be good to print. Help!

    Klaus1 wrote:
    … Of course you can, and it will look great from about 2km away.

  • Can I change the default resolution to minimize buffering?

    Can I change the default resolution to minimize buffering?

    This is a function of the server and content, not the player itself.  You'll have to do this through the different video players (YouTube, Vimeo, Hulu, etc.)

  • Can I change the Set-In point to an earlier time on a clip in the timeline?

    After a clip is added to the timeline from the source window, can the starting point of the clip in the timeline be changed to an earlier time than what's in the clip in the timeline?
    Or do I have to use the source window to re-import the clip back into the timeline, after selecting an earlier time for the clip to start?
    I'm running CS 5.0.3 on Win7, no special HW or addons.
    Sorry for the newbie question; if there's a better forum to ask this in, please provide a reference. I'm reading the AGI Digital Classroom Premiere Pro CS5 textbook, and I'm not seeing a way to do this from the timeline. I'm not finding answers to this in the FAQ or in other online videos.

    Thanks for the quick response!
    I like the 3rd suggestion the best, but it doesn't seem to work.
    Here's what I'm trying to do:
    The sequence in the timeline has: clip A clip B clip C. I don't want to change anything in clip B or clip C, I just want to add an extra second of footage to the beginning of clip A to the sequence in the timeline.
    Let's say the original video file for A is 10 seconds long, and clip A that was added to the timeline started at time=4 and was duration 3 seconds, in the original video file for A.
    Now I want to change the starting time of clip A from t=4 seconds to t=3 seconds, so that the new clip A will have a duration of 4 seconds.
    What I'd like to be able to do is:
    - double click on clip A to send to to the source window (works fine)
    - change the In Point from t=4:00 to t=3.00
    If I change this in the source window, then click the "Set In Point" button, nothing happens.

  • Where can i find the resolution of a photo? I need to change it to 102

    where can i find the resolution of a photo in iphoto? How can I change it to 102?  I see is the pixel  width and height, along with the mb/kb size for photo info; I need to change the resolution and size for submission.

    Short answer: the dpi (or resolution)  is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing.  Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • Can I change the volume of one specific part in a clip/sample?

    Hi!
    The question is: Can I change the volume of one specific part in a clip?
    Im not talking about a specific track, but a specific clip/sample.
    For instance you have a clip/sample with the duration of 4 sec. and you want to adjust the volume of a part that's only 0.2 sec.
    Is this possible?

    Juicyappleman wrote:
    Can I change the volume of one specific part in a clip region?
    yes, use a volume automation curve, search GB's help for "curve"

  • Switcher ?Can you change the size of the screen resolution on the Macbook?

    I'm really interested in buying a Macbook. This will be my first Mac. I love the way they look and feel. I'm concerned with the size of everything on the Macbook. The overall size of the fonts in applications such as word, or safari was too small for me.
    Can you change the size of the screen resolution in OSX like you can on Windows? In Windows doing this makes everything visually bigger.
    Please say you can. I'm really wanting the Macbook as it would be great for for a student like me.
    Thanks in advance.
    Hopefully a Macbook 13" 2.0 Superdrive soon.
    Hopefully a Macbook 13" 2.0 Superdrive White soon.

    With an LCD, if you change the resolution, things will be bigger, but blurrier.
    You can however keep the resolution of the LCD at its native resolution, giving the maximum picture quality, and then use tools, such as Tinkertool…
    http://www.versiontracker.com/dyn/moreinfo/macosx/11967
    … to modify the font display size of items such as the menu bar, Finder labels etc etc.

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

Maybe you are looking for