Can i change the volume level for just a part of a track?

i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

Yes you can
On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
NOTE: Use the Shift key to adjust incremental amounts.
Have fun!!

Similar Messages

  • How can you change the volume level????

    Hi all:
    I don't know if this is possible but sometimes I want to reduce or increase the volume level of several clips (10 or 20) by the same amount while they are linne up in the timeline, they are individual clips arranged back to back during the edit.  I want to either up the volume by 10db or down 10db from baseline 0db.
    Do I have to do it induvidually or is ther a way to select them and apply the change to all of them at one time.????
    Your input is appreciated
    Thanks,
    AppleLou

    And to go a step further, put them all into a Compound Clip, and you can apply a single filter to them all at once, plus keyframe your audio over time to them all at once.

  • Can I change the icloud account for just one of my devices?

    I have 4 devices (2 iPhones and 2 iPads) on my iCloud account. I want to put one of my phones on a new icloud account so it is not with the other devices. I thought I did this by creating a new Apple ID.  My phone shows the new ID, but still uses the old ID in iTunes and shows up on my other devices under the send & receive message section.

    You just need to sign out of old id in three places.
    Settings - itunes and app store
    Settings - messages
    Settings - facetime.

  • While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs.  This has always worked for me until now. I have not changed any settings

    While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs.  This has always worked for me until now. As far as i know, i have not changed any settings.  This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

    I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue.  I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
    The DND feature should not be a factor at all if you're sure it's turned off.  I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears.  Once the phone reboots, do a test to see if this has helped to resolve the issue.
    If not, go to Settings > General > Reset > Reset Network Settings.  Then, test it out again.  Post back if neither of these solutions solve your issue.

  • Can you change the volume display at bottom of screen to the song time instead?

    I have just bought a new Ipod Nano and really like it!  The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show).  I find it really annoying not knowing at a quick glance how much more of a song is left to play.
    I know this info is displayed by double tapping the screen (although it is only shown temporarily).  Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    Thanks in advance.

    Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    There is not.  You can let Apple know how you feel about it using the form on this page.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • Where can I change the font settings for the name of the month in iPhoto's calendar project?

    where can I change the font settings for the name of the month in iPhoto's calendar project?  I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font.  On previous calendars I've printer via iPhoto and Apple, the font was much larger.  I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place?  I did not consciously change the default.
    I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered.  I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem.  For the most part, the rest of the calendar is okay.
    As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
    Message was edited by: KPAausFrankfort

    "Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers.  (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
    What are the sequence of steps that you and your batch processing take from Bridge?
    You can use call Photoshop's Image Processor from Bridge to create the jpeg files  (Tools > Photoshop > Image Processor).  In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display).  In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

  • Can I change the keyboard command for full screen? I don't see the option in preferences.

    Can i change the keyboard command for entering Full Screen? I don't see the option in the keyboard preferences pane.

    My midi set up is fairly extensive, and what I've done is keep an up to date diagram of all my midi interfaces and device connections. I use this as the desktop background on my studio mac, and just hit F11 when I need to reference something. Simple but effective.

  • TS1485 change the permission level for iTunes and iTunesHelper to allow full access. how do i do this

    How do i change the permission level for Itunes

    I have actually been using Amazon cloud for a while now and never had this problem. Actually, I think I did get locked out once and was able to get back in by contacting support and answering some questions. This option isn't available with Apple.. They lock you out for 90 days regardless of whether you can verify your ID. I know this because I contacted them recently and they verified my identity exhaustively and then said 'sorry-there's nothing we can do and you are not  getting a refund for time lost.'  I think I understand why the policy is there, but I think it's ridiculous that they make no exceptions even when the mistake is on their side, which I'm pretty sure it is in my case.

  • Can I change the volume of one specific part in a clip/sample?

    Hi!
    The question is: Can I change the volume of one specific part in a clip?
    Im not talking about a specific track, but a specific clip/sample.
    For instance you have a clip/sample with the duration of 4 sec. and you want to adjust the volume of a part that's only 0.2 sec.
    Is this possible?

    Juicyappleman wrote:
    Can I change the volume of one specific part in a clip region?
    yes, use a volume automation curve, search GB's help for "curve"

  • How can we change the valuation type for a material created.

    How can we change the valuation type for a material created.
    Note : All open orders are closed for this material.3
    Please guide

    Hi,
    You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
    Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
    - you are not allowed to have open transactional data
    - no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
    - in case of valuation category setting batch archiving may be necessary
    BR
    Csaba

  • Why i can't change the volume in my headphone or answer incoming call or skip song's

    hello
    i get my new iphone 4-  1 day ago i connect my original headphone but i noticed that i only can listen to the music but
    i can't change the volume or answer incoming call or skip song with doubel click.
    hope you can help me.
    danny

    thank you onicray but.
    when i put my serial number in the apple support of my iphone 4 that my friend buyt for me in hong-kong - i get the massage that i don't have 90 day of free support.
    i buy it - 5/18/11 and now i am in israel.
    i don't know what the reason.
    can somone have any .....halpful .

  • I can't change the volume while in cover flow anymore

    I have a 5th generation Ipod nano. I have tried resetting it. I used to be able to change the volume when 'album covers' came, this does  not happen anymore it just shows a list of the songs playing. I can still change the volume when I play music from my playlists, but some of the music in cover flow is not in my shorter playlists . What should I do?

    Hello Pamela,
    What happens when you try to change the volume with the headphones plugged in?  Anything?  Does this happen with every pair of headphones you try?
    Maybe try resetting the Nano.
    http://support.apple.com/kb/ht1320
    B-rock

  • I can't change the volume of the background music in my project even if I put it to 0%

    I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...

    Solved it, there was a problem of the same music put it twice!

  • Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
    http://www.apple.com/contact/
    B-rock

Maybe you are looking for