Can i Change/Update the Lead Status using Action profile of Activity.
Hi,
I have created one Lead, and on the basis of Qualification level action triggers and Ativity getting generated.
I want to know that it is possible by using functions(Action Profile/conditions) in activity, If i change the status reason of Activity (as Accepted) Earlier Leads status would change.(as Close)
Please resolve with solution.
Regurds,
Dipesh.
Hi Dipesh,
What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
1. This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
In the action definition Processing type use method call.
Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
But in think implementing point 1 should be easier.
Wish the information is useful.
Regards,
Shalini Chauhan
Similar Messages
-
Steps For Updating the IDOC Status using ALEAUD
Hi all,
My Scenario is : R/3(IDOC)--> Legacy System(File).After the IDOC is received successfully on the Receiver System.I should Update the Status of IDOC on the Sender System.
Can anyone help me out :
What all the Steps & Configurations involved for Sending an Acknowledgement & Updating the IDOC status from the Legacy System.
Thanks in Advance,
Dattatreya.Hi,
You may need to set up another flow (a reverse one), where the Legacy sends a msg to XI with the Idoc number of the initial idoc you sent (onward flow).
now, you can map the idoc number in E1ADHDR/E1STATE/DOCNUM and other statuses as required (in various tags) and also other information as per your environment. Pls see the below links
Re: Acknowledgements ever switch to Status 39
Re: Asyncronous acknowledge from file adapter
Re: R3<->XI<->Auto-ID:How to check result of Idocs sending out from R3 in aii ?
Regards
Vishnu -
I currently have no balances or orders waiting on payment, but I cannot install free apps or update my current ones because AppStore wants valid credit card information. I want to get around this so that I can actually -use- my iPhone.
Halp?As a personal note:
I only subscribed to Pandora Plus.
I have not opted to re-up the subscription.
I have went according to the help information, but am not given a 'none' option.
Should I be blowing up their phone lines over this? I can't even update like Skype and such without needing to have a credit card? -
Setting user status using actions in business activity
Hi
I have defined a new action profile. In that I have defined a new action using which I want to set user status to overdue. I have also defined a new user status "overdue".
Now I want to set user status to overdue. For that we have defined new badi implementation also, but it is not able to change the status.
Please tell me what all steps I need to do, to make it work.
Thanx in advance.
Cheers
HiteshHi Hitesh,
Check whether processing parameters are given correctly
It should be given as below
Element : PROCESS
Name : PROCESS
Type Name : CRM_J_STATUS
Initial value : OPEN (here you can give the one you want )
Let me know if you have any issues.
Reward points if it helps.
Regards,
Madhu -
I have iBooks 2.1 on ipad. I changed my password and can no longer update the app. If I delete the app and install the updated version, will I lose the books I have purchased?
Try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if you can then update the app.
If you do delete the app then you should be able to re-download your ibook purchases via the Purchased tab in the ibookstore in the app. But in case some of them are no longer available in the store and/or you have PDFs or epubs in it, then you could first connect it to your computer's iTunes and do File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) which should copy them over to the Books part of your iTunes library so that you have your own copy of them and can sync them back (even though they aren't iTunes purchases it should also copy over any PDFs or epubs that you have in the iBooks app) -
I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296 -
My IOS is 4.2.2 and my ipod doesnt accept later versions. Before updating the software, I used to have viber and now I can reinstall it, because it needs IOS 4.3 or later. Is there any place where I can get the older versions of this app? Also, there are others app that wont install, such as netflix, angry birds, etc
Please, help me! I really need it!Only if you have it on your computer or in a computer file backup
-
I would like to set up an older iPad with a new messages account so it can be used by my kids. I don't, however, want to lose the apps or music that are on the iPad. Can I change only the Messages "account"?
Thanks. I had tried that, but was still having problems. Then I realized that I was using three addresses on both devices. Once I changed it to only one email on one iPad and a different email on the other, it worked great. Your message encouraged me to dig deeper and think differently. It worked. Thanks again!
-
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?
Regards,
MharekyOS X Lion Update 10.7.5 (Client Combo).
-
My Ipad 2 keeps rebooting and it doesn't update the battery status anymore.
Here is the error
Incident Identifier: D729F1DF-6960-4847-A6C3-75351A67AE9B
CrashReporter Key: c7e1a298a42fc9bbb41b4ed79ff29a1655de12a6
Hardware Model: iPad2,1
Date/Time: 2013-02-16 02:58:06.115 -0800
OS Version: iOS 6.0 (10A403)
CRC ERR!
I had this problem for quiet sometime now, and I would really appreciate your help. THANKSI did try restoring the ipad a couple of times and it didn't do the trick. I also tried updating the firmware.
The only thing that worked for a while when the ipad - on it's own - rebooted itself into a black screen with white text and automatically fixed the issue. It worked perfectly for a couple of months but it came back after I forgot to charge the ipad , does anyone know how I can force the ipad into that screen again ? -
I can't change my Desktop Background anymore, Used The Diptic app to create a collage and now i cannot change my desktop picture, on Mac Book pro
You can't go to System Preferences>Desktop&Screen Savers and change the display? Try it and see. I've never seen that problem.
Clinton -
Automating the Lead Status "Rejected" to "Archived"
Hi all,
My Customer, wants the Rejected leads to be archived automatically. Manually we can do it from Lead Detail page, where as daily n number leads will be rejected so manually it might be a problem. Can we "update values"(Lead Status field) by writing workflows.Can this be done.
Regards,
RatanHi Dipesh,
What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
1. This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
In the action definition Processing type use method call.
Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
But in think implementing point 1 should be easier.
Wish the information is useful.
Regards,
Shalini Chauhan -
Updating the User Status in Sales Order Item
Dear Gurus,
Iam trying to update the User Status on the SO item using STATUS_CHANGE_EXTERN function module and the status is successfully getting updated.
But the problem is if Iam updating the status it has to delete the Purchase Requisition assgined to it, which is not happening.. whereas when Iam manually changing the Status, the PR is getting deleted.. Can anyone suggest some other function module or some other way of doing it other than BDC?
Best Regards,
Sreenivas.Hi ,
I am also need to update the Item user status. Could you please provide me the logic for the FM 'STATUS_CHANGE_EXTERN'. And also let me know the where we need to write the logic in VA01/VA02.
It would be helpful me a lot.
Thanks
Srihari. -
To Update the ibase STATUS PROFILE
Hi All,
Which function module should be used to update the ibase STATUS PROFILE ?
Thanks,
VimalHi,
If your requirement is to change the user status of an object( Ibase in your case) , you can use FM CRM_STATUS_CHANGE_EXTERN and provide ibase object guid as objnr , 5 char user status as user_status and commit .
Regards,
Nithish
Maybe you are looking for
-
Netflix is too small on the apple TV
Need to make Netflix bigger. I only have a 42" and it so hard to read the titles if I'm sitting on my couch. Needs to be bigger like Roku or wii....please.
-
i have 320 x 240 videos that i want to edit in final cut express HD. in my old FCP i could just create a setup for this frame size, but in HD i just cannot see how to get my project and sequence to be the right size. i thought maybe i could capture s
-
Extra char appears string to FML fails. - Urgent
We are facing an issue we have not scene before. Its between OSB -> Tuxedo WTC integration. We being the team Supporting Tuxedo related Applications can see : Whenever we get a message with 00 at the end it gets successfully processed 12:45:06.0747:1
-
Change to change user email from long format to short format
Hi, folks: I created a new administrator (Preference) and type in an email address. However, there is no place to specify long or short format. I browse the MGMT_NOTIFY_DEVICES table and the TYPE is 1. Right now, I manually changed it to 5 in the tab
-
Some question about communicating the usb RAW device
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driv