Can i change where my purchased ringtone starts playing?

Can I change where my ringtone that I bought at iTunes starts playing on my phone?  I want it to start 30-45 seconds later in the song.

Thank you.
Sent from my iPhone

Similar Messages

  • HT3951 can not find a previous purchased ringtone.

    I can't find a previously purchased ringtone.  I went to go and buy it again but it says that I have bought it before.  I am using a different computer than what I normally use.  But should it not have been in purchases and should I not have been able to redownload it?  Where can I find it?  thanks in advance.

    Ringtones (and audiobooks) are currently a one-time only download from the store, so they won't appear in the Purchased link for re-downloading. If you don't have it in the Tones part of your computer's iTunes library, nor on a backup, then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

    The backup files for my devices are saved to my internal hard drive. I have a small internal hard drive and would like them to be saved to an external drive. How can I change where iTunes automatically backs up to?

    This has nothing to do with iTunes as iTunes provides no way to move or relocate the backup files.
    A search of google or the fourms would reveal ways to create a folder link to relocate the physical location where the files are stored.

  • HT201269 Can you get your previously purchased ringtones from itunes back when you switch to a new device?

    Can you get your previously purchased ringtones from itunes back when you switch to a new device?

    Try here:
    iTunes: Error 13019 during sync

  • Can I change where on the screen the "get info" display pops up?

    Can I change where on the screen the "get info" display pops up? I have dual 23" cinema displays and the Get Info box always pops up inconveniently on the far, far left. Is there a way to change the default location, more towards the middle, where it would fit better into my work flow?

    treetopstudio,
    I'm not sure to change the default of Get Info but what you could do is open the Inspector instead it 1 remembers it location when you close it and 2 when you click on another icon in finder changes to that. To open it instead of the get info window Option + Command + i or hold Option and click File show Inspector.
    Hope that helps,
    Weston

  • How can I change countries to purchase content in foreign languages?

    How can I change countries to purchase content in foreign languages?

    You can buy ONLY from the itunes store of your country of residence ( proven by the valid billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
    You cannot buy from other countries itunes store.
    Sorry.

  • Can I change where downloads are stored?

    Can i change where downloads are stored?

    You can change the downloads location to a fixed location or you can choose to be asked where to save each download. ''Options > General, Downloads section''.
    *See --> [https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel Options window-General panel]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • My computer crashed, I don't have the serial number for lightroom 4.  Is there any way to retrieve the serial number.  I can't remember where I purchased this.

    My computer crashed, I don't have the serial number for lightroom 4.  Is there any way to retrieve the serial number.  I can't remember where I purchased this.

    Lfiles37 if the serial number has been registered then it will be available under your account.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • How can I change where an iTunes download is saving?

    My iPod has a larger capacity than my computer's hard disk, so I bought an external drive to store my music on. I moved my iTunes library folder to this G: drive and instructed future downloads to be sent there as well. This has worked well.
    Problem--I'm downloading a whole season of Grey's Anatomy from iTunes, but I had forgotten to turn on the G: drive until about 10 minutes into the download. I think the TV shows are being saved to my computer, because the computer keeps crashing every 5 minutes when I try to resume the download (because of not enough space on my hard drive.) Question: How can I change the save location of a purchase that has already been started?

    this will help
    http://docs.info.apple.com/article.html?artnum=301748

  • Can you change where an icon will appear on the stage?

    I'm using A/ware 6. I'm using DISPLAYICON to make an icon
    appear. Is it possible to change where the icon's content appears?
    Is there a way of requesting an icon's content appear at a specific
    X/Y location on the stage rather than where it is located in the
    icon? Thanks

    > I'm using A/ware 6. I'm using DISPLAYICON to make an
    icon appear. Is it
    > possible to change where the icon's content appears? Is
    there a way of
    > requesting an icon's content appear at a specific X/Y
    location on the
    > stage
    > rather than where it is located in the icon? Thanks
    >
    Create 2 variables - ImageX and ImageY.
    Open your Display icon, and set it's Positioning field to On
    Screen.
    Type ImageX in the X location. ImageY in the Y location.
    You can now set the variables in your code, at any point
    before you display
    your icon. The icon will appear in the position specified by
    your variables.
    Steve
    EuroTAAC eLearning 2007
    http://www.eurotaac.com
    Adobe Community Expert: Authorware, Flash Mobile and Devices
    My blog -
    http://stevehoward.blogspot.com/
    Authorware tips -
    http://www.tomorrows-key.com

  • After iphoto makes a copy of my picture file, can i change where that copy is stored?

    I would like to keep both my original files and my iphoto "shadow" files on an external drive to save space on my laptop. Once I import my pictures to iphoto, where are those new iphoto files saved? Can I change this to always save to my external drive?

    the iPhoto library is a single entity - you can run it on an external drive but you can not have part of it one place and part another place
    to run your library on and external drive
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Can you change where a clip connects to the story line?

    Anyone?

    The question's kind of vague. A clip gets connected to  the primary storyline based on where the skimmer or playhead is. If you want them connected at a different place move the skimmer before you make the edit.
    If you mean can you change the connection point of a connected clip without changing its position, yes, you can. You option-command click on the lower edge of the connected clip at the point at which you want it attached to the primary storyline.

  • I can't find where to purchase PDF Job Ready

    PDF Job Ready was recommended by my printer and it sounds like something I should get, but I can't find it for purchase anywhere. Can anyone direct me to where I can get it?

    http://www.adobe.com/products/pdfjobready/partners.html

  • Can't find my previously purchased ringtones from itunes??

    Hi
    I have the new 3gs iphone and after I synced it to itunes I wanted to set my purchased ringtones but they are not on itunes any more@! Where did they go?? HELP!!
    Thanks in advance
    Mary

    Open itunes
    Click the word Store at the top of your computer screen.
    Click Authorize

  • Can I change where WL dumps weblogic.log?

    Hi,
    I believe WL always writes wl.log to the subdir defined by
    weblogic.system.home... can I specify a different directory for logging?
    This is important for us in the context of clustering and shared file
    system, because we want WL to log to a local dir instead of the shared file
    system (for performance reasons), and yet in order to clustering to work
    under 5.1, I had to set weblogic.system.home to a directory under the shared
    file system!
    Gene

    Yes this bug will be fixed in service pack 2.
              Prasad
              Gene Chuang wrote:
              > I posted in the env group as well, but the only reason why I need to change
              > the location of the weblogic.log is because of the 5.1 unable to cluster ejb
              > due to tmp_deployments bug... If this bug can be solved, I have no reason
              > to change where weblogic.log gets dumped!
              >
              > Gene
              >
              > "Prasad Peddada" <[email protected]> wrote in message
              > news:[email protected]..
              > > You should post this in environment newsgroup.
              > >
              > > Thanks
              > > Prasad
              > >
              > > Gene Chuang wrote:
              > >
              > > > Hi,
              > > >
              > > > I believe WL always writes wl.log to the subdir defined by
              > > > weblogic.system.home... can I specify a different directory for
              > logging?
              > > > This is important for us in the context of clustering and shared file
              > > > system, because we want WL to log to a local dir instead of the shared
              > file
              > > > system (for performance reasons), and yet in order to clustering to work
              > > > under 5.1, I had to set weblogic.system.home to a directory under the
              > shared
              > > > file system!
              > > >
              > > > Gene
              > >
              

Maybe you are looking for

  • Modem encryption needs to be changed in order for airtunes to work?

    Hi all, I was happily listening to airtunes, closed the mac, opened it and airport express then had a flashing amber light. Now, if I try airtunes it won't work thru my speakers. I can only hear music thru the macbook. I spent a fair amt of time toda

  • Embedding BI Publisher output in OAF Page

    Hi All, I want to embed the BI Publisher output in one of the regions on OAF page. I was getting error Error invoking 'set_xslt_locale':'java.lang.IllegalAccessError: tried to access class oracle.apps.fnd.i18n.common.text.DigitList from class oracle.

  • Keep italics while styling text from Word

    I have a long book with loads of endnotes. I've gotten them to come in with italics preserved. However, I still need to reset the styles for them. But any change kills all italics. Is there a way to re-style the text in general and preserve the exist

  • SCCM 2012 Hierarchy design

    Hi I am designing an SCCM 2012 environment at the moment. We have 7 locations.  2 are data centers and have excellent links between them.  our main office is well connected to the DCs 100MB link. All other offices have between 50 and 200 users.  All

  • Bind shared variable to multi-chan​nel item

    How do i bind a shared variable (array) to a Fieldpoint multi-channel item? When i configure the shared variable, and click browse to select the network item to bind to, i can select individual channels but there's no "All" tag.