Can i charge an omni 10 threw the usb port

can an omni 10 be charged by using the usb port?
This question was solved.
View Solution.

Hi,
The recommendation is to use the charger which comes with the unit. You still can use USB port to charge BUT it may take ages to get a full charge and this may effect your computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can I charge my iPod from the USB socket on my tv

    Hi, just wondering if anyone knows if I can charge my iPod from the USB socket on my tv No other way at the moment and running low on battery Thanks

    Yes if the port puts out enough current (about 1.2 amp (500 ma). If less it may not show charging when the screen is on but it will charge, but slowly with the screen off.

  • W4 Windows tablet - any way to charge while also using the USB port?

    I have an Acer W4 tablet with Windows 8 and I want to keep a USB printer and the USB charger attached to the tablet at the same time, but since it only has one USB port I cannot seem to make this work. I have tried an external, AC-powered USB hub which also charges attached USB devices, but it seems like the tablet won't charge when the USB port is in "host" mode, which it needs to be to talk to the printer. Anyone have a workaroud (hardware or software) for this problem? Thanks

    I think the end of this thread:http://community.acer.com/t5/Windows-Tablets-and-Convertibles/how-to-charge-the-W4-820-tablet-while-data-transfer-is-going-on/m-p/271906/highlight/true#M11301has the most current info on it.  Not easy but theoretically can work.

  • Can you turn power off of the USB ports

    I have a powerbook g4 800 and it has an external fan that is powered by USB. When I put the computer to sleep and have the power adapter not plugged in, the fan still gets power. So I occasionally have the power completely drained after the laptop was in sleep. Usually I remember to shut off the fan, but it's an extra step that seems like it could be solved by setting something somewhere to power down USB on sleep.

    Unfortunately the Mac holds the USB ports in an active state to allow mice and keyboards to wake the machine - I don't know of any way to change this.

  • Can't synchronize my IPod with the USB-Port of my 27 Inch Cinema Display

    I use a 27" Cinema Display with my Windows PC.
    It is connected via USB and Display Port.
    Synchronizing my IPod at the USB Port of the PC works fine.
    Synchronizing my IPod at each of the three USB Ports of the Cinema Display doesn't work.
    Any suggestions?
    Thanks Stephan

    Sorry if there is any missing information. I'll try to put all requested information:
    The car system is the one that is already installed in my car, I mean it is not something bought externally and installed in my car. The car is a ford S-Max. This car has a complete radio system that includes a USB connection for mp3 players. It works ok but not with the iPod. The IOS installed is the last that has been released, but the iPod was not working with this connection before that update.

  • Can u charger your nano with a usb port thru the headphone port?

    I am wondering if you can charge your Nano with a usb headphone cable like one that comes with a Ipod shuffle?

    No.

  • My 1st gen iPad is not recognized by my PC, my iMac or my macbook.  it's charged, connected directly to the usb port, shows the connect to iTunes screen,  but is not in the device list on the pc or iTunes??  I have reset it repeatedly, and rebooted???

    I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers.  the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to itunes" message.... but dose nothing after that.  I had it all set up and gave it to my daughter who tried to sync it with her macbook when it did this.  We are using direct connections to the computers usb ports, the cables are new, ituens is newly updated on all pc's...
    any ideas what the problem is??

    Did you already have a look at this article?
    iOS: Device recognized in iTunes for Mac OS X

  • Can't connect my camera using the usb port.  Why does an error message appear?

    I've connected this camera hundreds of times in the past.  But now it says"A USB is attached that is drawing too much current.  The hub to which it is attached will be deactivated."  What's going on?  This is just a little digital point and shoot.

    A powered hub is a USB hub with it's own power supply.  Google "powered hub".  There's plenty to choose from.  These don't depend on the computer connection to supply power to the USB devices connected to them.  That's the reason for them requiring a separate power supply and of course why they are called "powered hubs".
    The fact that your camera works when the printer is disconnected confirms what I have been saying.  The machine just cannot supply enough power (I think it's 500mA max) to supply all the devices you want to connect concurrently (or it's right on the ragged edge).
    As for seeing the power draw, the info is indeed in the System Profiler*.  Select a USB device and look for info labeled "Current Available (mA)" and "Current Required (mA)".  It's the current required that I think is the power draw.
    * It's also shown in USB Prober in the Developert tools utilities.

  • I can't charge my iphone using the usb wire

    nor can i sync upto itunes???
    Is there any drivers that i can download so i can do this??

    the drivers are included in itunes if you mean for windows that is
    when you get itunes to work ok with all it's services and the likes it will charge
    and sync

  • Can i connect a printer to the usb port on airport express

    I've setup my Airport Express 802.11n with my HP Deskjet D2600 series printer, reset, reconfigured, etc. but it is still saying "Printer is offline" when I try to print. What am I missing?

    Never mind - I tried "rebooting". I hate it how that always works!

  • Can you sync an iPod through the USB on AEBS

    i want to know if you can sync an ipod wirelessly from the usb port on an airport extreme base station. i want to be able to sync my ipod, wirelessly from my macbook. If it does, theres £120 on its way to apple..

    Well sorry to be blunt again, no you can't.
    There are no self-made solutions.
    The reasons you can't are relatively simple, the AEBS is acting as a print server and the iPod requires to be connected to a USB port connected to a computer not a print server.
    You may want to investigate the Keyspan USB Server.
    http://www.keyspan.com/products/usb/server/

  • So i have a 32gb ipod classic and the usb port is never recognized??

    So my ipod is a 32 gb classic but i can't really use it because the usb port will not connect to my computer or anyone else's. the only reason why it's not completely useless is because i can still charge it using the firewire port but i can't restore it or put new songs on it or anything. i can only charge it. the usb port on my computer works just fine so i'm thinking the problem is with my ipod. any suggestions on how to confront the problem??

    What you maybe missing are the cables, the current USB iPod Dock cables dont work on this iPod, the
    M8948LL/A* - A1040 was designed before Apple switch over from Firewire to USB2.0. for all iPod interface.
    If you want to use it on a Windows PC, you got to format to FAT32, and your PC must have Firewire (IEEE 1394 port), for syncing or
    else you got to get a special "iPod Dock Connector to USB 2.0 + FireWire Cable" from Apple store (I dont think they have it in stock but you can try eBay or Amazon. But these are meant to be used by connecting the Firewire to the Wall Charger and the USB end to the Windows PC USB2.0 port. If your PC has both USB and Firewire, and you connect them both simultaneous, it will corrupt your iPod formware.
    It can connect to Macs that have Firewire ports, you can try Mac with USB2.0 port, but I dont think it will work.
    Stick to Mac, it will give you less problems.

  • Is the USB Port in the front of G5, USB 1.1

    Hi All,
    Can anyone confirm this? Is the USB port in the front of the G5 only USB 1.1? I hooked up a USB hard drive to the front port and the transfer speeds were super slow. I checked the system profiler and it said the max speed was 12Mbs. Then I hooked that same USB hard drive to the back USB port and the speeds increased significantly. I checked the system profiler and it said the max speed was 480Mbs. I thought all the USB ports on the G5 were USB 2.0, or is my front USB port dying ? Please confirm. Thanks.

    The USB ports on the G5 itself are USB 2.0. Those on the keyboard which came with it are USB 1.1.
    (44423)

  • Charging iPod abroad--can I plug into the USB port of a foreign computer?

    I'm going to Guatemala and will be bringing my iPod touch. I expect that I'll be in internet cafes on a fairly regular basis. Is there any currency conversion problem if I charge my iPod off of the USB port in a foreign computer? Guatemala uses the same currency as the US, but I want to be sure it's safe...
    Thanks!

    USB power output is standardized, you should have no trouble, just be sure not to sync with the machine if it has iTunes or you will remove all your music/videos.

  • Can I charge my iPhone using the airport express usb port?

    I want to place an Airport Express in the kitchen to extend my audio system (using Airplay) and wondered if it could double as an iPod/iPhone charger via the USB port.

    Probably not. Don't know about iPhone 4 or iPod, but with an iPhone 3G, it will appear that the iPhone is "charging" initially, but the charging indicator will turn into a "plugged in" icon after a moment or two indicating that the iPhone is no longer charging.

Maybe you are looking for