Can i charge my ipad in USA with the same adapter

Can i use an Australian ipad2 charge adapter in USA

jamesatnoosa wrote:
Can i use an Australian ipad2 charge adapter in USA
Yes you can. The power supply units work with voltages from 100 - 240 Volts AC. You may need an adapter to fit the American style outlets.
Stedman

Similar Messages

  • Can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".

    can't access my ipad, comes up with the following message on screen "Ipad not backed up. this ipad hasn't been backed up. Backups happen when this ipad is plugged in, locked and connected to wifi".

    Try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons

  • HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    Hi Jamesdwills,
    Welcome to the Support Communities!
    If you are using the same Apple ID on both devices, the Game Center profile should be the same.
    Check out this information from the iPad User Guide.  Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
    Using Game Center
    http://support.apple.com/kb/ht4314
    Game Center settings - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a13d039
    Game Center settings
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    Allow invites
    Let nearby players find you
    Edit your Game Center profile (tap your nickname)
    Get friend recommendations from Contacts or Facebook
    Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
    Change restrictions for Game Center. Go to Settings > General > Restrictions.
    Cheers,
    - Judy

  • Can 2 people set up apple id with the same email address

    My husband and I share the same email address can we set up our apple ids with the same email and different passwords?

    No. You can share the same Apple ID for iTunes content, but for everything else...FaceTime, iMessage, iCloud, etc., you really need separate Apple ID's & these iD's must be verifiable email addresses. If you don't set things up that way, you'll have a mess on your hands.

  • Can I have more than 1 susbcriber with the same email address?

    I have developed a BC secure zone in Muse as a members only area. This works fine. I have subscribed all the members and all is OK except that I find if I try to subscribe 2 members with the same email address (e.g. a married couple with a shared email address), the first subscription is overwritten by the second. Is there a solution or do I just live with it?

    Hi Neil,
    This is the default behavior of the system because email is the unique identifier. You can't have more than 1 subscriber with the same email address.
    Regards,
    Aish

  • I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

    I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

    The easiest way to find out what carrier it's locked to would be to call the store where you purchased the phone.
    The phone can be unlocked from any location.  However, most carrier have restrictions about unlocking and you have to contact them for details.

  • Extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone?

    extension mobility  - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks

    Yes, or simply configure 1 UDP and default device profile for the other one.
    EDIT: and actually with those models, you should be able to use just one
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00

  • How can I get "IMAQ Line Fit" stable (with the same points)

    How can I get "IMAQ Line Fit" stable (with the same points)
    I my vision applications I use a lot off times "IMAQ Line Fit"
    some times the results are not Stable.
    See vi and word document attached.
    When I take the same points but in a other order (sort)
    then suddenly all points are used.
    In this case I was looking for a edge in vertical direction (Y).
    I found the points but "IMAQ Line Fit" did not function well.
    I tried changing all settings like pixel radius and minimum score and
    also threshold and so on. But no result.
    Then I sorted the points reversed and that worked. See vi.
    I use labview Labview 8.6.0 and IMAQ machine vision.
    Maybe this problem is solved in a newer version.
    Please let me know.
    Thanks
    Attachments:
    TEST-imaq-line-fit-86.vi ‏169 KB
    IMAQ-Fit-Line-Problem-86.doc ‏230 KB

    Thank You for your reaction Hossein,
    This "one application" uses "Line fit" about 20 000 000 times a day.
    about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
    A algorithm should be:
    1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
    2e Accuracy
    3e Speed
    4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
    NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
    so in the future there will be a update.
    In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
      from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
    This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
    Because outliers should be rejected only Bisquare does this reasonable.
    This program does NOT USE "Minimum Score" and "Pixel Radius"
    Valid fit = When there are enough points within Outlier_Distance.
    Algorithm steps:
    - Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
    - If DeltaX <= DeltaY then SWAP X Y and later Swap back
    - Sort Points at on X value
    - First : Bisquare Linear Fit
    - Calculate distances to the found line for all points
    - Inliers: Points within Outlier_distance
    - Outliers: Points outside Outlier_Distance
    - Only use Inlier Points
    - Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
    - Second : Bisquare Linear Fit only with the Inlier Points
    - Results are from the second fit
    Warning : This Program is Not so accurate and Not so fast
    See attachments it is in labview 8.6
    If some has a improvement please let me know.
    Thanks
    Attachments:
    svi_fit_line_Bsquare_and_draw.vi ‏18 KB
    Fit_Line_Bisquare_Linear.vi ‏40 KB

  • I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

    I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

    Consult the store from which you bought it for their return policy.
    Best of luck.

  • HT202105 I charged my Ipad mini 3 with a 5W adapter. Is my battery screwed?

    SO I charged my Ipad mini 3 with a 5W adater instead of the 10W it came with because I didn't notice. About 5-10 times fully charged. what I wanna know is if my battery is already damaged?

    Aldous88 wrote:
    Oh thank you. I was kinda scared since I read somewhere it might get damaged. Something about a trickle charge.
    See Charging Your iOS Device.
    (Note that I am affiliated with that site, and some pages contain ads).

  • I want to sync my iphone, ipad, and macbook with the same username and password, is this possible

    i want to sync my ipad, iphone, and macbook with the same username and password.  is this possible and if so, how do i do it?

    You mean with the same iCloud account?
    If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.

  • HT202213 How can I authorize more than 5 computers with the same Apple ID?

    Somebody knows how to authorize more than 5 computers with the same Apple ID? I have One Apple IMac, Apple TV, I-PAD, 2 HP PC's, One I-Phone and one I-Pod Touch. I would like to have the possibility to use as I wish the same Apple ID on one of those without deauthorizing another one.

    "Somebody knows how to authorize more than 5 computers with the same Apple ID? "
    You cannot.
    Authorization applies ONLY to computers.  Ipods/ipads/iphones/Apple TVS are NOT authorized at all.

  • How can i use Mail on 2 macs with the same mail address?

    Hi,
    I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
    Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
    What is to be done to separate the two systems (i. e. make them independent of each other)?
    Hans

    It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
    The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

  • Can I create a lot of instance with the same name?

    I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
    choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

    You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
    // array
    int numCreatures = randomGeneratedCreatureQuantity();
    Creature[] monsters = new Creature[numCreatures];
    for (int j = 0; j < numCreatures; j++) {
        monsters[j] = new Creature();
    // Or a list
    int numCreatures = randomGeneratedCreatureQuantity();
    ArrayList monsters = new ArrayList();
    for (int j = 0; j < numCreatures; j++) {
        monsters.add(new Creature());
    }Good luck
    Lee

  • Can I import 2 sets of photos with the same file name numbers?

    I've inadvertantly not had my camera set to "continuous" for file names and now have 2 memory cards with 2 different sets of images with the same file names.
    Can I still import both into Lightroom 2 without problems?
    What are the consequences?
    Thanks
    Stuart

    Yes. Of course, two files with the same name cannot be in the same folder. And don't forget to uncheck Don't import suspected duplicates during import.
    Another thing is that's not a good idea for good asset management, because someday you'll make some mistake because of this ambiguity. Good DAM practices suggest renaming your files after or during import, so that each files has a unique name across your entire image archive.

Maybe you are looking for

  • Pavilion audio slider is not working correctly

    I have a Pavilion dv7-3165dx notebook and my operating system is windows 7 64 ,  and recently the touch slider where you adjust the volume is not displaying on the screen when touched. its controlling the volume, but I wouldn't know that unless I go

  • Prolbem deploying BC4J in Oracle 8i for NT

    Hello, We're testing the sample of BC4J distributed with JDev 3.0. When we test it localy, it works ok. Our problem arises when we try to deploy the BC4J as a EJB on Oracle 8i on NT. First when we deploy the BC4J runtime the deployment process return

  • ORA-02248: invalid option for ALTER SESSION when logging in from client

    Hi, I am a junior dba and I was hoping if someone could help me out with a problem I am having. I recently installed on oracle 10g client on my windows machine. I am trying to remote connect to my database on a unix box but I am getting the below err

  • Ipod Nano in disk mode

    Is it a bad idea to keep syncing my ipod using disk mode? This is the only way Itunes 9.1 will not crash when connected to my ipod.

  • Linux requirements  11.2.0.2

    what is the minimum required version of Redhat Linux 4 for 11.2.0.2.0 database? 32 bit