Can I check NTP sync using SNMP ?

Hi all
Is it possible to check if a switch/router is properly synced to an NTP server using SNMP ?
via CLI it's easy by issuing the 'show ntp status' or 'show ntp associations', but can i somehow check this via SNMP ?
thanks !
grtz
thijs

Hi Thijs,
It looks like the MIB is not supported on your device IOS.
Open the below link and click on "View Supported Images " to verify it.
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.168.1.1.11&translate=Translate&submitValue=SUBMIT
Hope it will help
Thanks-
Afroz
****Ratings Encourages Contributors ****

Similar Messages

How can I check serial number using icloud

how can I check serial number using icloud?

If you are talking about an iPhone and you simply tap on settings/general/about
Both IMEI and Serial numbers are there to see.
You can use the *#06# short code on the phone keyboard to see IMEI as well
Or connect your iphone to iTunes on a PC/Mac
Click on the device in side bar and summary button at top left of browser window
In the top panel you have :-
Name of the device
Capasity
Build Version/Software version - Mouse click on it to change which is displayed
Serial Number/UDID Identifyer - Mouse click on it to change which is displayed
Phone number /IMEI -Mouse click on it to change which is displayed
Its very easy to see both numbers if you actually have the device.

Check alarm status using SNMP

Hi,
Is there a way to check if there is an active alarm on a cisco switch/router (M4900/4948 series and 2960 series) using SNMP ?
I'm looking for a simple quick way to verify if an alarm is active (any alarm)
is there some sort of general OID that gives me a '1' or '0' ?
thanks !
grtz
Thijs

Like a table that hold all alarms. No there is no such thing.
There are so many reasons there could be an alarm. Hardware state, error rates, utilisation, etc
There are hardware state OID's that can give you a hardware component status.
Usually you will find that you have an OID for a component, like a fan.
1.3.6.1.4.1.9.9.13.1.4.1.3
You can then walk this OID to find the instances of that OID.
E.g, a fan for the device and another fan for the power supply, or a fan for each stack member.
When you know these instances lets say the walk return .1001and .2004 you can query
1.3.6.1.4.1.9.9.13.1.4.1.3.1001 and 1.3.6.1.4.1.9.9.13.1.4.1.3.2004.
The values returned can be:
Specific Object Information
Object
ciscoEnvMonFanState
OID
1.3.6.1.4.1.9.9.13.1.4.1.3
Type
CiscoEnvMonState
1:normal
2:warning
3:critical
4:shutdown
5:notPresent
6:notFunctioning
Permission
read-only
Status
current
MIB
CISCO-ENVMON-MIB ; - View Supporting Images
Description
The current state of the fan being instrumented.
So then you have an alarm for the fan's.
It is similar for other components like a power supply or temperature sensors, etc.
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-ENVMON-MIB
And then there are operational alarms not related to hardware.
For this you need to monitor values like CPU utilization and define a threshold.
Good luck,
Michel

How can i check apple id use in diffrent iphones

how i can i check my apple id use in diffrent iphones

I'm sorry. Please rephrase the question or post in your native language. That doesn't make sense. What are you trying to do?

How can i check apple id use in diffrent iphons

how can i check my apple id use in different iphons

I'm sorry. Please rephrase the question or post in your native language. That doesn't make sense. What are you trying to do?

Can't connect to/sync using new Server setup

Hi all,
I have set up a new Server and cannot seem to use it to sync, which is its purpose -- requests time out. I also cannot "Connect to server" from the Mac it resides on (suggested troubleshooting step someone gave me). Here's the background:
I'm a brand-new didn't-wannabe server administrator with OK but rather rusty technical knowledge.
I've set up Server in order to provide a local (non-Cloud-based) WebDAV sync server for OmniFocus as Apple in Yosemite (as I understand) removed the ability of 3rd party developers to use the OS's built-in WebDAV server to sync. So Apple stopped supporting the developer, the developer stopped supporting me, and here I am, doing the best I can, but I'm in over my head at the moment.
Here's my system:
MBA, mid-2011 / 4GB / 250 GB
HD with only 6GB free but I've gotten rid of the alert
Mac OS X 10.10.2
OS X Server 4.0.3
OmniFocus for Mac 1.10.6
iOS 6.1.6
OmniFocus for iPhone 1.15.1
I changed defaults for both the long and the short names of the server, edited them in the server overview window (the changed short name didn't take!). In the Settings tab of same, nothing is checked, which I wonder about. In Access, at the moment out of desperation I'm allowing all users and all networks, and still no dice.
In File Sharing, I turned file sharing on, set up my sync folder and shared it (again, out of desperation) with all users and all networks.
In the log, besides a lot of (to my eyes) gobbledygook, I see something like the following lines which seem significant, every time I try to sync from OmniFocus, either on the Mac itself or on my iPhone:
Apr 6 12:44:35 [servername].local OmniFocus[1642]: SecOSStatusWith error:[-34018] The operation couldn\u2019t be completed. (OSStatus error -34018 - Remote error : The operation couldn\u201a\304\364t be completed. (OSStatus error -34018 - client has neither application-identifier nor keychain-access-groups entitlements))
I can't find any documentation on the error codes.
Omni Group staff advised me to try connecting right from my Mac to the server also on the same Mac through Finder > Go > Connect to Server. If entering the server address (https://[servername].local), it times out in about 10 minutes in the same way OmniFocus does. In the same dialog, if I choose browse instead, I find that within the Server folder are aliases to both [servername] and [servername.local], and they both behave as if they were opening the very top level of my HD.
I'm at a loss for what to try next now, so would appreciate any sage advice.
Thanks!

I'm also wondering, from somewhat similar problems I've read, if permanent IP addresses might make a difference?
At the moment our household router gets its IP via DHCP from our telco provider, and I believe it in turn provides DHCP IPs to the devices on our home network. As this is working fine at the moment and I remember the old "if it ain't broke" adage, I don't intend to try changing this setup unless someone with some experience tells me I ought to. But I thought I'd throw it out there.
All "Connect to Server" and sync attempts are still timing out and this is a work-critical application I need to get running, so any info that could point me in the right direction is appreciated. Even if it's some piece of documentation I need to read. Thanks.

Can't Check-in files using SVN on Dreamweaver CC (2014)

Hi,
We upgraded to Dreamweaver CC last week. We were using SVN on Dreamweaver CS6 without any issues.
Since we upgraded to this version the following message appears every time we try to check-in a file to the repo:
Once we click Yes the Site Setup settings dialog appears. The subversion settings are fine. How can we fix this issue?
Thanks

On Thu, 9 Aug 2007 23:16:23 +0000 (UTC), "davimage"
<[email protected]> wrote:
>No one has had this problem but me?
Apparently.

Can a check-box be used to select more than one value

Hi, I have a form with a check-box that only allows one selection at a time. I have a requirement now to allow the user to select multiple selections. How can I accomplish this with a checkbox? Please help.

Then i didn't get your actual form-design.
Well there are 14 items displayed for each 14 denial reasonSo you have 14 items where each is for one denial reason, or 14 items where each has 4 denial reasons (14x14)?
They are all 'grouped' as one check_box item in the blockWhat does that mean. For the 14 items there is one checkbox? And what is the meaning if you check it?, and what if you uncheck it?
so I don't quite know how to be able to check 2 or more reason per recordAs far as i understand you, you would have to have 14 checkboxes, one for each reason, which can be individually checked/unchecked.

Can I check who has used AirPlay on my Apple TV?

I need to know who has used AirPlay on my Apple TV

only way is if your wifi router have some way of logging activities

HT4235 I just bought a new Ipod Nano and cannot get it to sync with my computer. I downloaded the latest Itunes before I started but it doesn't sync. The diagnostic test says that my Ipod isn't detected. What can I check?

I cant get my Nano to sync to my computer. It is new and and I downloaded the latest Itunes last week. I hit sync and it makes a sound within a second and then says it is done. What can I check?

Hey OBandPL,
I would use the following article to run through the recommended syncing steps one more time:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/HT1351
Welcome to Apple Support Communities!
Best,
Delgadoh

My backup sync seems to have been erased, and i didnt use 'clear sync data', how can i recover my sync or see my sync bookmarks?

I recently formated my computer, and reinstalled Firefox. I used the Sync feature, and selected the option "Replace all data on this computer with my sync data". However, nothing happened, and my quota ( i only checked later) seem to be an unusual size for the amount of bookmarks i had.
I am pretty sure i havent erased my data by accident, since i only joined manage account page after things went wrong.
I have synced my bookmarks sucessfully before, when i switched from Firefox 32 to 64 bits.
Anyone knows how can i see my synced bookmarks on server to check if it was somehow erased, and how to recover in that case?

Hi Shaktar!
By any chance did you used the Recovery/Sync Key to set up your account again or you resetted it? If you reset the Recovery Key your data was erased at the same time.
The Recovery key is used to encrypt your data and if you lose it, the encrypted data that we have is unusable.

Can i sync using 2 itunes ... home and work

can i sync using 2 itunes ... home and work .. i want my tunes from home and my calender and contacts from work. i used to use itunes at home and i sync at work ... but cant get the isync to work with the iphone and the imac24 i use ??

I had this same problem. You have to set up the check boxes on each computer of what you want to sync. On your home computer, have it sync a play list that you dedicate to the iPhone. Then at work have it sync everything else. Assuming you activated on your home computer this will work perfectly. If you activated on the computer that you don't sync music from, then it will ask you to erase the original sync and start on this other computer (your home one). Just let it do it and it will be fine. Hope this helps.

I can't seem to sync my contact on my ipad. the contact list is a book type and I can't figure out how to use it

I can't seem to sync my contact on my ipad. the contact list is a book type and I can't figure out how to use it

Look at Chapter 13 of the iPad iOS4.3 User Guide

I need to host a Shared PDF on SharePoint. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time.

I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?

try here:
http://www.bbb.org
File a complaint with them. Verizon will call you to fix the blunder.
But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
Good Luck

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

You're welcome.
All photos transferred from your computer are stored in the iPhone's Photo Library regardless if you select a single album or folder of photos to be transferred or multiple albums or folders. The photos on the albums or folders of photos include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in an album or folder of photos only by selecting the album or folder, or all photos in all albums or folders by selecting Photo Library.
Makes more sense when transferring multiple albums or folders of photos which cannot be changed when transferring only a single album or folder of photos.
The same applies with iTunes and music playlists. A song can't be in a playlist unless it is in the main iTunes library. Placing a song in a playlist does not duplicate the song.

Can I check NTP sync using SNMP ?

Similar Messages

Maybe you are looking for