Can I choose the frame that displays before the viewer presses Play?

I feel like I saw this in a tutorial, but now I can't find it again.
Apologies if this has been covered elsewhere, and thanks!

Select the movie by clicking once upon it and, in iWeb Inspector's QuickTime pane, try adjusting the +Poster Frame+ slider.

Similar Messages

  • Can i choose the resolution of my external display for when the lid is closed when my lid is open

    When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

    Hi there, I had a similar problem and was unable to resolve it.  I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck.  It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
    My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

  • I have iPhoto 11 9.2.4. - I want to make a new album or card but I can't choose the ''themes'' that I normaly have, is someone can help me !?

    I want to make a new album(book) or card but I can't choose the ''themes'' that I normaly have in the past, is someone can help me !?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    If the film's description page says that it has different audio tracks then you should be able to select the language via the playback control : http://support.apple.com/kb/HT5562

  • Display format, can I go back to that display type version ?

    I am getting a new display format now for last two days, earlier one was better. Can I go back to that display type version ?

    You haven't told us much. Which version? Which particular part is being displayed differently?
    I'd guess you are distressed by the composition window. I'd suggest you grit your teeth and bear with it, as there are plans to improve it. What worries me about the discussion between developers is that they all seem to be using Mac computers, with little regard to what it looks like in Windows. The changes I'm thinking about are being done, I'm told, to prepare the way for features that are frequently requested, such as drag and drop of addresses and the ability to stack multiple addresses in one line, a la Outlook.
    Or you could go here:
    https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
    and download version 24.6

  • How can I choose the time in WRT54G

    Hi
    Problem:
    How can I choose the time in WRT54G?
    Data:
    WRT54G v5.1, firmware 1.0.9
    Thank you for your attention

    I don't think that you can actually "choose the time" on your router, that is, you cannot set it to an arbitrary time.  The router's clock is set from the internet.
    However, you can choose your "time zone" and whether or not to use "daylight saving time".  To do this, open your web browser and point it to address 192.168.1.1.  Enter your router password.  This will take you to your router's web setup page.  You can set the time zone on the bottom of this first page.  Then click "Save Settings".  Exit your browser.  When your router has internet access, it will set itself to the correct time.

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Please answer me... can I choose the language in a rental

    please answer me... can I choose the language in a rental movie????

    If you are speaking of an iTunes rental? then I do not believe so......the credits for the film will show what language subtitles are available for the film.....

  • Can anyone gimme the song list played before the keynote at wwdc 14. i heard those songs while streaming the wwdc 14 video.

    can anyone gimme the song list played before the keynote at wwdc 14. i heard those songs while streaming the wwdc 14 video.

    I Found a link to a spreadsheet at this link https://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CA8QFjAB &url=https%3A%2F%2Fdocs.google.com%2Fdocument%2Fd%2F1o3pfHFbJk1FE8wS9SeCnQNzXyE4 fxaagWAnRcvJYjk4%2Fedit%3Fusp%3Dsharing&ei=jFKoVNazOcPp8AXT1oKQAw&usg=AFQjCNHiW6 sAyAFj-oYQMbx47K1maKxh3A&sig2=U4qbSGD-91i6fTnyadR0iA  just click and read.

  • HT4914 can i choose the songs i want icloud to have?

    Can i choose the soings i want icloud to have?

    Then DIY here using computer iTunes:
    1. Select a title (.mp3 or .m4a) in your iTunes Library
    2. Do File > Get Info on selected title (Windows do Edit > Get Info)
    3. In the dialog choose Options tab
    4. Set Start Time and End Time (no more than 35 secs otherwise won't work)
    5. Close dialog.
    6. Now control click the title (right click) and choose Create AAC Version
    7. When it is done, drag the newly create title to the desktop.
    8. Delete the newly create title in iTunes.
    9. Rename the title on your desktop from ringtone.m4a to ringtone.m4r
    10. Drag and drop it into iTunes
    Now you have a ringtone.
    Make sure it is selected in iTunes for syncing with your new iPhone.

  • Can we change the View attribute of the Switcher through PERSONALISE PAGE?

    Can we change the View attribute of the Switcher through PERSONALISE PAGE? I want this switcher to display another column. This switcher that i want to change is a seeded one. I have extended a VO and added a new attribute. I want this Switcher to display this new attribute. How can I acheive this.
    Regards
    Ali

    When I do exactly that I get a .XLS file that when you open it and click Save As comes up in Single Web Page mode. When I change the type I get a much smaller file. I am doing exactly what you describe, but with different results. Is it possible that this is configurable?
    Here is a screenshot of me exporting:
    http://i879.photobucket.com/albums/ab359/jameyweare/problem1.gif
    Here is the properties of the file. As you can see the size is 215kb This is actually a very small query for for demonstration purposes. I have queries that return 20k rows with 10 to 15 columns. This creates a spreadsheet that is over 20MB.
    http://i879.photobucket.com/albums/ab359/jameyweare/problem2.gif
    This next screenshot is of the Save As dialog from Excel. I have highlighted the file type that the file is currently saved in.
    http://i879.photobucket.com/albums/ab359/jameyweare/problem3.gif
    In this screenshot I have changed the file format.
    http://i879.photobucket.com/albums/ab359/jameyweare/problem4.gif
    Here is the new properties. The file size has decreased to 57.5kb. In the cases where I had files that were 20MB or greater (and took aver 10 minutes to open up), this process reduced those files to about 200kb.
    http://i879.photobucket.com/albums/ab359/jameyweare/problem5.gif
    Any help on this would be appreciated.
    Edited by: Jaime Weare on Jul 17, 2009 3:38 PM

  • HT2589 how can i skip the viewing on my account when i has not use my apple id in i tunes stores?

    How can i skip the viewing on my account when i has not use my apple id? The main problem is i do not have a credit card... so what should i do?

    You can't, you will need to enter a credit card number before you can use that account in the store.
    There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534

  • How can i change the settings of play/pause in Elements 13?

    Hello!
    How can i change the settings of play/pause in Elements 13? I definitely need cursor back to the "start play" point each time i hit stop (spacebar), like it works in Sony Vegas or in most of audio editing software. Can somebody help?
    Thanks!

    invasion 21
    The following is a copy of the reply that I posted to your question earlier today in the Adobe Premiere Pro Forum
    invasion21
    You are in the Adobe Premiere Pro Forum. What is your program? Is that Premiere Elements 13? If so, you are in the wrong forum where
    Premiere Pro answers may not be appropriate for your Premiere Elements (any version) question.
    You are not going to find what you are looking for in Premiere Elements preference settings.
    You write
    I WANT it playhead jump back to start play position, when i hit spacebar for pause.
    You can maneuver yourself into that through Edit Menu/Keyboard Customization/Applications/ and its Help category which by
    default shows
    Go to Timeline/Clip Start, using Home
    and
    Play/Pause Toggle, using Space
    But, you may find it is best to leave well enough alone. Explore and experiment with changing the keyboard shortcuts for the commands and decide what works for you.
    ATR

  • When i pause a video in FCPX the current frame becomes clear but when i press play they become blurry?

    When i pause a video in FCPX the current frame becomes clear but when i press play they become blurry?

    I had this SAME EXACT problem for WEEKS! >_<
    It was so frustrating. I tried everything I could. I was even using uncompressed video files (+60GB in size!) to try to fix the problem, but nope. Nothing. Except this...
    Go to:
         Preferences -> Playback -> Playback Quality and select "High Quality"
    By default, FCPX uses the lower quality setting to save resources.
    "...Playback Quality pop-up menu to choose whether to always use the highest-quality video for playback or downsized video for better playback performance"
    http://help.apple.com/finalcutpro/mac/10.0/#verb8e60ab7

Maybe you are looking for