Can I clone and transfer from the internal hard drive to an external hard drive ?

I got an intel duo iMac, the machine is very good even if it is almost 3 years old. But with the internal hard drive having 320 Gb I am running out of hard drive space. I have looked into changing the internal hard drive but that involves having to send the machine away to have that done. So I was wondering if I could just transfer all the Mac OS X and all the applications and settings within three user accounts to say a 2 TB external hard drive, and boot from that, using cloning software.
             Alternatively, is there a way to transfer the iPhoto and iMovie libraries to an external hard drive. That would free up space. I do not know how, if that is possible, although I have managed that with iTunes. My iMac is running Snow Leopard.
          Regards from John5801

John,
USB should be fine for general computer use, but media may add a little too much for the sustained rate that USB2 provides. In a previous career I did a lot of video editing. Firewire was much preferred in that task because of its stability at higher rates. I can see why the SuperDuper! people might suggest it.
When I cloned the wife's iMac, I had replaced the HDD on the MacBook Pro with a USB pocket drive that I've kept the original MacBook's installation mounted on. I've booted directly to that external drive, so you should be okay if you can make the clone across the USB. When I cloned the wife's machine I booted the MacBook Pro with a fresh HDD in Firewire target mode and connected it as an external Firewire 800 drive. Firewire 800 is much faster, but you'll need the cable and everything to be right.
Firewire has a better reputation among people running a lot of media from their drive. I would suggest that you try and get an external drive kit that can support both. I think your iMac supports both firewire 400 AND firewire 800 along with the 3 USB2 ports. I'm guessing based on my wife's 24" imac. The fastest would be the Firewire 800, but that standard is about to be pushed aside in both cases.
Hope that helped.

Similar Messages

  • Acurrate process to clone and transfer all the disk to another tiger computer....

    Please guys would be kind enough to show me an easy and acurrate process which incude process to clone AND transfer all the disk from my powerbook G4 (10,4,11) to a macbook (2,1)also tiger computer 10,4,11....
    (Carbon copy cloner or easier again you can think of....)
    TY

    Unfortunately, this can't be done.  Although you are using the same OS version (Tiger) the PowerPC version (your G4) is not compatible with the Intel version (your MacBook).  There was never a Universal Binary (version compatible with both platforms) for Tiger.  Apple only produced separate PPC and Intel versions.  If you were to clone your PPC version over to your Mac, it simply wouldn't run at all.
    You can use Migration Assistant which will move over all of your files and settings.  However, none of the applications you have installed will run as they are all PPC.  You would need to see if there are more current versions that are Universal Binaries.
    I wouldn't really recommend migrating at all between platforms.  I would start with a fresh install of a more current OS on your MacBook and then reinstall your apps one by one.  You can manually move over any personal files (pictures, music, office-type documents) by copying them over to a flash drive or by putting your G4 in Target Disk Mode.

  • I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    Hi, likely the easiest is to just poll the drive & get something like this...
    Get MacScan...
    http://www.apple.com/downloads/macosx/networking_security/macscan.html
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    But if you have a good external drive already, just clone it.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/

  • Can I stream and sync from the same itunes library to one AppleTV?

    Can I stream and sync from the same itunes library to one AppleTV?

    From what I can tell this is a bug.
    A very Frustrating bug. When the take 2 update launched I was streaming movies via "shared movies" from my synched computer without any issues. However after a couple of recent iTunes updates all the "shared" menus stopped appearing and I can no longer stream anything from my main computer.
    When I open up my macbook though everything streams fine, all the "shared" menus immediately appear.
    Numerous restarts, factory resets and reinstalling the 2.0 software have done nothing to help this issue.
    If anyone has any more light on the subject it'd be great to hear. Also I'm not sure which update broke it because I went about a month not using the apple tv.

  • I deleted some video's from iPhoto then from the trash can on iPhoto and then from the trash can on my desktop but the space has not freed up on my hard drive

    I deleted some video's from iPhoto then from the trash can on iPhoto and then from the trash can on my desktop but the space has not freed up on my hard drive

    Check out the following to see where your space is:
    Where did my Disk Space  go?
    Slimming your hard drive
    OmniDiskSweeper
    FreeSpace
    SpaceControl
    FreeSpace

  • Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

    I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

    Thanks for your reply:
    I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck            
    I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
    I tried several brand new discs from the same box, still no luck.
    My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

  • How can we restrict the type of components that can be dragged and dropped from the sidekick CQ

    how can we restrict the type of components that can be dragged and dropped from the sidekick CQ

    Generally drop the components at parasys. The components allowed on the parsys is control via the design mode of the page.So restrict components at the design of the parsys. http://dev.day.com/docs/en/cq/current/wcm/working_with_cq_wcm/using_edit_designandpreviewm odes.html#Design%20Mode

  • TS3297 I can't make purchases anymore in the App "Clash of Clans" and yet I can purchase music and movies from the iTunes store. Can someone help?

    I can't make purchases anymore in the App "Clash of Clans" and yet I can purchase music and movies from the iTunes store. Can someone help?

    What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

    I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

    You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
    You need to get a new computer or a refurbished one.

  • Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas?

    Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!

    If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
    see > Startup Manager: How to select a startup volume
    If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
    For more on gray screen, see > Mac OS X: Gray screen appears during startup

  • How to move an iTunes library from the internal hard drive to another bootable disk.

             I got two Mac OS X installations on my i Mac system. One on the internal hard drive (320 Gb), that has been there since the iMac was bought 3 years ago, upgraded to Lion on 2 August. (call that INT) . I have a USB external drive, and recently bought a firewire Lacie external drive (2Tb), so to boot from there when I can, with hard drive space getting tight this year. I successfully installed another copy of Lion on LACIE.
             Then I went to work to transfer my iTunes library, which the media files were optioned to store on the USB drive. Intending to transfer both the music and video files, and the megadata ( playlists, ratings, playcounts ) I found the media files and the iTunes library file and the .xml document in my iTunes folder from INT. I made a new folder in the USB drive, and copied the contents from the old iTunes folder to that new folder. I re-started in LACIE, and found my empty iTunes folder. I copied over to the new iTunes folder, then opened iTunes. My eyes saw the music library to the same number of items, with the playlists etc showing.
            However, I tried to sync an iPod Nano, and a window came up saying 100 songs could not be copied to the iPod because they could not be found. After ejecting the iPod I tried to play a song from iTunes, and the screen filled with exclamation points. A small window came up, asking for a password to open "sparsebundle" and my name. I entered my password for the administrator's log-in and it said try again with the password. Without knowing what password to put in, I clicked Cancel, and got another small window asking to locate the file. Then clicked Cancel again, not knowing where to search. All the media folders were showing after quitting iTunes and opening Finder .
          I re-booted into INT, and opened iTunes. The library was still there. I synced my iPod again, ejected it, played 3 songs on the iPod, synced again, ejected it again, and opened the playlist "Recently Played". It showed up okay with no problems. So my iTunes library in INT is alright.
          Has anyone got any idea how to make the transfer into LACIE and get it running alright, or what went wrong with what I did ?
          In the meantime I will empty my LACIE iTunes library folder's contents to the trash, and securily empty the trash .

    Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
         What went wrong was perhaps to fail to consolidate the library at first .

  • HT4528 how can you recover deleted photos from the iPhone hard drive?

    Is there anyway possible i can recover my deleted photos from my iphone hard drive for free?

    You can't for two reasons: First, the iPhone doesn't have a hard drive. Second, there is no Trash folder, so once something is deleted it is gone forever. If you were foresighted enough to sync your phone regularly the photos should still be in the app you used for managing photos from digital cameras on your computer, and they are also in the iPhone backup on your computer. If you enabled Photo Stream they are also in iCloud. But if you didn't take advantage of any of these backup options you are out of luck.

  • I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

    I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
    Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

    1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
    2. What's the media 16:9 or 4:3?

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • How can I recover deleted photos from the internal memory???

    Hello,
    I was using Sony Bridge to import photos from my phone to my Mac.
    After importing.. the software told me it was successful and complete then asked me if I wanted to delete the pics off my phone.. I pressed 'yes' because my phone was full on memory..
    After it was finished deleting I then decided to check my imported photos only to find they wern't even there?!??! It has created an iPhoto library.. but it won't even open and seems to be empty.. 
    All the photos are now deleted off my phone and I can't seem to find them anywhere on my Mac. I have tried recovery programs with no luck. 
    I am seriously upset :'(
    Is there any way to recover them from my internal memory!??! :-( 
    Are they on my Mac??!! Because Sony Bridge told me they had successfully imported!!! 

    Hi Natasha_L
    I'm very sorry for the late answer.
    I got a reply from the development crew today.
    We tested it and indeed we were able to reproduce it in the case that the iPhoto Library has been migrated into the new Photo Library.
    If that is the case, the user might be able to recover the pictures in the following directory:
    ~/Pictures/iPhoto Library.photolibrary/Auto Import
    If unfortunately the pictures are not there, there is an slight possibility that they still remain in the temporary directory, as they are first copied there and then moved into the Auto Import folder. To search that temporary directory, the user can run this command in the Terminal.app:
    find /var/ -name "iphoto" 2>/dev/null
    The problem will be fixed to BFM(4.1).
    Best regards
    Fredrik

Maybe you are looking for