Can i combine popup widget with voice

I am writing a book with ibook author and I am trying to combine two widgets
pop up and voice. I want that when the user clicks on the pop up a click voice will be heard and still the pop up will be opened
is it possible

Attach a sound to a slideshow and put that into a widget, perhaps.

Similar Messages

Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?

Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?
Everything else is same. 29.97, fps, 1920 x1080, Linear PCM, 48kHz, mono, .mov
If not, could I add the logo animation after outputting to compressor using QuickTime 7?
I'm re-wrapping footage from Canon XF100, which is why m2v1. I like working this way to preserve original footage.
I just had my logo animated and designer matched everything except the m2v1. Providing ProRes 422 (HQ)
Thank you for your thoughts. I'd like to avoid changing my camera footage to Apple ProRes 422 (HQ).

Hi Mary,
I'm new to FCPX too!
When creating a new project, if you click on Use Custom Settingsand then ckick on the Custom checkbox in Video Properties, you can specifyexactly what you want!
If you need to change it after the project was craeted, I found that you can click and highlight on the project in the Project Library window, then go over to the "info" button . The Properties window will expand from the right side (above the "info" button . With Properties selected it will show you the present settings, if you need to change those settings, click on the icon of the WRENCH on the bottom of that dialog box (Properties). You can then change your settings.
Good luck, and happy cutting!
Jb (James)

How can I combine one font with many styles to show up as one font

How can I combine one font with many styles to show up as one font? I have quite a few fonts, that instead of showing up as a single font with different font styles (bold, bolditalic, semibold, light....) each style shows up in the fonts dropdown menu as a separate font. Any way I can fix this?
Another font question, is there any way to group my fonts in the dropdown menu according to different categories such as 'favorite san serif fonts', or 'script fonts'?

So your saying if it wasn't set up that way be the font creator there is nothing I can do. That's a shame.
Most of the fonts that do this were free fonts, such as Walkway.
But I do have some fonts (hebrew fonts) that I purchased that do the same thing.

Married. Now how can I combine my library with my wife's?

Just got married. My wife and I have quite a few songs on our individual computers. How can we combine our libraries, you know, what's mine is yours, what's yours is mine?

Hey!
Do you have the music files on your computer? If not heres what I would suggest doing first...
1. open "My Music"
2. Make a new folder
3. Name it after your wife.
4. bring all her music in that folder.
5. import that whole folder into your itunes.
That should do you. This is allittle vague, but im gonna guess you can do this much. Reply if you need more help.

Can I combine photography subscription with another single app subscription?

I'm interested in subscribing to Creative Cloud to use PhotoShop and Illustrator. I'm aware that I could either get 2 single app subscriptions or the complete package, but does anyone know if is it also possible to combine the photography subscription (for PS) with a single app subscription for Illustrator, as this works out a bit cheaper?
Thanks in advance.

Yes, it is possible to get PS+LR with a single app subscription to Illustrator with the one Adobe ID.

How can I combine advanced actions with the branching view?

I am creating a branching scenario in Captivate 7. It's fairly involved and I'd like to keep track of it with the branching view. But, I understand that if I use an Advanced Action, it won't show up in the view. My slides track a conversation that goes down different routes based on the selected answers. I give the user 3 smart shapes that I'm using as a button. When they press the button, I want to change two variables and then jump to another slide. If I put this all into one advanced action, I have to write an advanced action for each button and it won't show the branches.
Is there a way to execute an action that will change my variables. Then, have it jump to a slide. I've been trying to give the user 1 attempt, execute my advanced action that will change the variables, and then have the Last Attempt jump to a slide, but that doesn't seem to work.
Any other ideas?

I just upgraded to version 8, hoping for a solution.
I know that I can write an Advanced Action for every slide like this:
It changes my variables and then advances to the right slide. But, I'll have 100+ slides when I'm done and I was hoping that could make this a little easier. AND, I can't track it on the branching view.
I was hoping that I could make this work:
I could use an Advanced Action to change my variables (I would only need a few) and then have it jump to a slide. This would show up in the Branching view. But, I can't get that work.
Are there any other options?

Can I combine 2 forms with different master pages?

I have two forms that need to be in one PDF together, but have different master pages. The forms are flowed, so the master pages are necessary to keeping the header and footer content in place. Is there any way to combine two forms?

Hi guys, I figured out a kinda fudged answer.
You can make as many master pages as you need, the problem is getting them to appear on the correct pages. I couldn't get the flowing first page to be as long as it needs, then start using the second master page for the next section. If anyone knows how to do that, I still need to know.
How I fudged this was I put the entire form on the master page in a table to position it correctly and keep it flowed. Then I set the master page to a minimum occurance of 1. - There you go. Not the right answer, but it works.

How can i combine the JTabbedPane with JSplitPane?

there is an example in Notepad++,where when 2 or more tabs are open,we can right-click the tab and choose the "go to another view" command.it's so good that we can check 2 files in two views.
so i wanna know how to implement this function in java?and is there any example i can study?
Thanks a lot!

I just upgraded to version 8, hoping for a solution.
I know that I can write an Advanced Action for every slide like this:
It changes my variables and then advances to the right slide. But, I'll have 100+ slides when I'm done and I was hoping that could make this a little easier. AND, I can't track it on the branching view.
I was hoping that I could make this work:
I could use an Advanced Action to change my variables (I would only need a few) and then have it jump to a slide. This would show up in the Branching view. But, I can't get that work.
Are there any other options?

How to combine looping column with calculated column

Dear Gurus,
I have a report that contains number of sale items in each plant. And plant (0PLANT) is a master data. I have to calculate Accumulate Total as below:
     Plant
Date     Mall 6     Pinklao     Siam     Mini L/P     Total     Acc. Total
1     135,260     186,170     103,833     145,636     570,899     570,899
2     32,043     22,772     29,587     19,098     103,500     674,399
3     49,477     48,919     20,206     23,587     142,189     816,588
4     33,937     32,399     30,520     30,710     127,566     944,154
In the column section, I have put the Quantity under Key Figure Structure and put Plant upper the it, so I get the result as below
     Plant
Date     Mall 6     Pinklao     Siam     Mini L/P     Total
1     135,260     186,170     103,833     145,636     570,899
2     32,043     22,772     29,587     19,098     103,500
3     49,477     48,919     20,206     23,587     142,189
4     33,937     32,399     30,520     30,710     127,566
I have no idea how can I put the Acc. Total to the report. Please suggest me for this issue. I'm so new for BW.
Thanks in advance
Edited by: Sukanya Nawnaung on Apr 24, 2008 6:04 AM

Not knowing your tables I do not know the answer as it is not obvious from your scripts what the join between the two data sets would be??
If you can tell me that then you can easily combine the two with an in-line view or using the new WITH... syntax.
Otherwise, I see that the only difference between the two joins is;-
1st WHERE DR_ACC = DECODE(DR_ACC,*'TXN'*,DR_ACC)
2nd WHERE DR_ACC = DECODE(DR_ACC,*'OFS'*,DR_ACC)
If you make this (don't understand the need for the decode, why is it here?!); -
DR_ACC in ('TXN','OFS')
And then use a case statement if you need to seperate out your two pairs of columns; -
case when DR_ACC = 'TXN' then TXN_BRANCH else null end as "Transaction Branch" (repeat principal for other 3 columns)
case when DR_ACC = 'OFS' then A.OFS_BRANCH else null end as "Offset Branch", (repeat principal for other 3 columns)
Make sense?
regards,
Robert.

Can't combine some files

I am trying to combine about 30 PDFs but am getting 3 error messages. Two files says they are restricted and can't be combined. The 3rd file is a form fillable and the error message says something about XML.
How can I fix this? These files really need to be combined and I can't leave out any of them.
Thanks!

From the restricted files you must first remove the security settings before you can combine them.
You can't combine forms created with LiveCycle Designer with other PDF documents.
You can use a portfolio or package.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

Hello Halfback71,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frequently asked questions about Apple ID
http://support.apple.com/kb/ht5622
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Best of luck,
Mario

HT204053 I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?

You can access, usually under the Apple (icon) menu in the main desktop
window, note item with name "About this Mac" & click on that, to see more
information about your computer, its OS X version, and other. The system
version and build model are there. Do not post a serial number.
If you are setting up Mail in a Mavericks OS X 10.9.x system, there often
is access to information in the Help viewer from the main menu bar, or
in an open mail application. If you have a Gmail or other account, that
info is often on their home page where setup and help are located.
The settings of each email account may vary according to their provider;
so you would have to change your computer to accept them. An older
link to a general look at that issue, change IMAP to POP, is covered here:
https://discussions.apple.com/message/16770816#16770816
While that may not answer your question, you could use the info in
your Mac OS X system Help viewer and use its search; or maybe
a Spotlight search to see an answer online.
You have to learn some basic things in order to actually use these...
and it helps to expand that so you won't have to pay for tech service
on things you can do yourself in a few minutes, beyond easy stuff.
Of course, you're hearing this from a guy with no ISP email, ever.
So mine are web-mail only; & I never save email to a computer.
PS: If you have a new Mac with an AppleCare plan, you may be able
contact Support for help. Ask someone (for 90 days, or up to 3 years
if the Plan was extended) there at AppleCare, for their guidance.
http://www.apple.com/support/contact/
Good luck & happy computing!
edited

Can I move photos around in iPad? There are some photos in camera roll, are those the ones I took with iPad? Then there are some that are imported-I guess those are the ones from my camera. Can I combine them into different albums? Thanks

Can I mover photos around in iPad? There are photos on the camera roll-are those the ones I took with iPad? Then there are the ones labeled as imported-I guess those are the ones I took with my camera? Can I combine pictures from both into one album? Thanks.

At the moment no, you cannot move photos between albums in the Photos app directly on the iPad - but with iOS 5 (which will be free to download) in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device.

Looking for a reading App. iPad (iOS 7.1.2) - Kindle. I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Can i combine popup widget with voice

Similar Messages

Maybe you are looking for