Can I communicate with two different FP 1000 modules through one labview program at the same time

I am wondering could you communicate with two seperate FP 1000 modules with one labview program, using a tab control, with page 1 of the tab communicating with one FP 1000 through com port 1 and page 2 of the tab control communicating with another FP 1000 module through com port 4, using different iak files for both. Can I do it through using those wireless modems supplied by National Instruments. Sorry I dont have a name for them.

Noely,
Within a single IAK file, you can have multiple FieldPoint modules on separate COM ports. There is no need to use separate IAKs for the program you are describing. Actually, older versions of NI-FieldPoint do not support having multiple IAKs in use simultaneously (I am not sure whether it is currently supported).
As for the Radio Modems, they are called SRM-6000s and can be used simultaneouslyon different serial ports. Although, using the SRM-6000 in a single master multi slave arrangement, you could use a single serial port to talk to both FP-1000s (3 SRMs total). You will need to configure the FP-1000s to have separate addresses (DIP Switch setting).
Regards,
Aaron

Similar Messages

  • Can I have two iPads with two different credit cards linked to one iTunes account?

    Can I have two iPads with two different credit cards linked to one iTunes account?

    It is still not possible to have two credit cards with your iTunes store account. I've just had a discussion with an Apple representative who suggested I give feedback to Apple about this. The more we are, Apple might listen to us in the end.
    This is the link
    http://www.apple.com/feedback/itunesapp.html
    Please feel free to use or modify what I wrote there:
    I’m surprised as are many other people who have the same issue (can see this in many forum threads) that Apple don’t give us the possibility to have at least 2 credit cards with one AppleID/account like most other vendors do (even much smaller than Apple). This certainly forces people to buy some stuff elsewhere that they otherwise would have purchased from Apple (for example books) or restrain from buying things they would have bought if they had a choice to use a second Credit Card.
    Not having this option puts me in a precarious situation since it would not be OK to buy just anything with the Credit Card that is tied to my business (and in many cases like mine the business is only one person, the VAT No being the same as my social security No).
    Sole traders need an option too.
    Greetings
    Anna

  • Can I use one GBIP-Interface with two programs at the same time?

    Hi, I have one PCI-GBIP-controller with multiple instruments installed. Now I want to use these instruments with two differents programs at the same time.
    E.g.: program 1 uses GPIB0::1 and GPIB0::3
    and program 2 uses GPIB0::4 and GPIB0::7
    Is this possible??
    When I have tried to do this, I always got timeout errors..
    Thanx in advance.
    Philipp

    Hi,
    You shouldn't have any problems accessing different devices from different programs using the same interface. I even used the two VIs to communicate with the same device. Although not the best approach, VISA didn't return any errors.
    DiegoF.

  • My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
    Mac OS X 10.6 Help: Reinstalling Mac OS X

  • Can i add two country holiday on my iCal and see them at the same time?

    Can i add two country holiday on my iCal and see them at the same time? HOW?

    Just subscribe to the appropriate calendars: you can subscribe to as many as you like.
    http://www.apple.com/downloads/macosx/calendars/

  • How do I make windows smaller so I can see more programs at the same time?

    I would like to see more programs at the same time. When I open a program I see the 3 buttons on top left, the close button, the plus and minus. But it either disappears ( - ) or comes on full screen ( + ). How can I make them small and move them around to see different things on the monitor?

    Hi,
    At the very bottom right hand corner of your window there. There are three little diagonal lines. Click and hold with the mouse button and drag it all around there. Better? Hope so!
    Regards.
    Ian.

  • Can't run Pshop and another adobe program at the same time

    Hi all,
    I'm experiencing a frustration problem. I can't run two adobe programs a the same time - ie, Lightroom and photoshop, After effects and photoshop.
    Lightrrom and After effects sem to be playing together okay at the moment so looks like it may be a PShop issue.
    Running final release of windows 7 64 bit, licenced PS3, trial AE, trial PS4....8GB Ram,  has been with both Nvidia and ATI video cards, open GL on , Open GL off, seperate scratch disks, reinstalled everything,
    Any help, advice, hints would be really appreciated as having to close programs all the time when switching apps is a real pain in the neck
    cheers
    Jeff

    thanks whytefly,
    yeah I thought that may be the case but then realised both After effects and CS3 are 32bit (86x) and I can't run those together
    I'm jealous as hell that you can run 3 together  haha,
    cheers
    Jeff

  • HT1338 How can i use my data on windows or mac when i use one of them in the same time?

    Hi,
    i have a Mac book with 2 operating system, ( Windows& mac). How can i use my data on windows or mac when i use one of them in the same time?
    Thank you

    The following article(s) may help you.
    Resolving duplicate calendars
    Resolving duplicate contacts

  • "you can not use multiple instance of Program at the same time"

    Hello @ all,
    I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
    I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
    If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
    I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
    Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
    Maybe, you know what I can do!
    Thanks for help!

    Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

  • Can multiple PCs access one remote panel at the same time?

    I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
    "LabVIEW:  Serial port receive buffer overflow.
    LabVIEW:  The network connection was refused by the server."
    My question is: Can multiple PCs access one remote panel at the same time?
    Thanks in advance!
    Y

    Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

  • Wether can invoice have with two different VAT rates, 16%

    Dear SDN team,
    I have a requirement like a invoice should have two different VAT rates.
    Situation is below:
    A rebate agreement is created and it was settled partially and final settlement is also carried out.
    Rebate agreement nº  XXXXXXXX, with a validity period between the 01.05.2010 until 31.07.2010. This rebate agreement created the credit memo XXXXXXXXX with the VAT rate of 18%.
    Mean time the VAT rate was changed from 1st July from 16% to 18%.
    There are invoice created in the first half and others belonging to the second half.  Invoice created during the First Half it was created the VAT value with 16% (Before July)and the Invoice created with the Second Half it was created with 18% (After July1st).
    But customer request is to have an invoice with two different VAT rates, 16% and 18%. However, the invoice only takes into account the 18%.
    And i have suggested the below resolution - But user still needs to have two different VAT rates in one invoice for the line item this is for the have a legal precept which force me to have a different VAT rates depending on the original invoice date
    Please let me advice how to resolve this issue.
    Looking forward for your favorable reply.
    Thanks and Regards,
    Jana
    Suggested Solution:
    But having two different VAT rates in one single invoice or credit note is not possible at all.
    Further if you would liked to have different VAT rates for the two separate ivoices - This can be done by doing the Rebate agreement with partial settlement for the First half that is before 30.06.2010 and final settlement after 01.07.2010. By doing this rebate agreement will have two different invoices created with two different VAT rates.  But now this is not possible for the RA where it is done with final settlement.
    So, You can not have two different VAT rate in one single invoice.

    Dear,
    In order to solve this issue with wrong VAt rates I propose you to proceed as follow:
    1) Cancel the CN (Credit Note)
    2) In the CMR (Credit Memo Request) set the tax classification of the materials with wrong VAT % to 0 (inside the CMR in item-billing document).
    3) Maintain for the access sequence of MWST a higher access than the normal one for tax classification 0 with the old tax percentage (E.g.: 16% in your case)
    4) Determine a new pricing for the CMR (via menu path: Edit > New pricing document)
    At this stage your items will have some 18% and some 16% of VAT. When you create the CN those percentages will be kept.
    If you are satisfied with the result it is now a matter of making sure the program that prints your invoice is mentioning the different VAT rates of the items. As you didn't specify anything about this point, I seize the opportunity to advice you about. No matter of the type of print program you are using (SAP script, PDF or Smartforms), you need TO BE SURE that when the CN is created (with two different types of VAT %) also your PRINTOUT is properly created mentioning the two different rates and relative values.
    If not printed correctly because you did not foresee to have different percentages it is easy to solve it with a programmer.
    In case of questions or doubts do not hesitate to post back your answer.
    Regards,

  • You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 60 days. This is the message I get when trying to view purchased material!  My ID hasn't changed!

    I can't pull up purchased content without this - You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 60 days. - my ID hasn't changed

    You can use multiple AppleIDs to purchase new music but you are limited as to how frequently you can change authorizations for re-downloading  past purchases.  It may well be a measure to deter piracy by stopping a group of people from going around to a friend's computer and downloading purchases on the other person's computer.  It is easy to avoid by making sure you have backup copies on drives at home so you never need to redownload anything.

  • Can two or more place comments on a pdf file at the same time?

    We use SharePoint to place pdf files for our team members to open and comment and review.  Until recently we have not had any issues with two or more opening the same pdf at the same time and placing comments.  But now we are losing some of the comments.  Please advise.

    I've seen changes I've made on my iPad show up on the same document that's been open all the time on my Mac, which suggests it might be possible. However, I've also had a small number of notifications that documents on different devices are not in sync with each other. So while it might have the potential to work, I'd be inclined to think it would be quite unreliable.

  • Can I Use Different Programs at the Same Time

    Hi All,
    I understand that the Creative Cloud can be installed on two computers but the same programe cant be running on both at the same time. I use my MacBook and iMac in unison so my question is could one computer be running Illusstrator and the other running Photoshop without any issues at the same time?
    Thanks
    Sam

    Hi Sam
    The Creative Cloud apps can be installed on 2 computers and used at the same time by the individual associated with the membership.
    Thanks
    Bev

  • How do I link fields on two different sheets? What I am trying to do is enter data on one sheet and at the same time in is entered on a second and sometimes third sheet at the same time

    PLEASE FORGIVE ME THIS IS THE FIRST TIME I AM USING THIS
    1) How do I get data entered into 2 or 3 fields on different sheets all at the same time?

    Hi David,
    Welcome to Apple Support Communities!
    In Pages, you can have several sheets in a document, and several tables on a sheet. You can link cells between tables and sheets.
    You can not link from one document to another, but who needs to?
    To link cells from Table 1 on Sheet 1 to Table 1 on sheet 2,  click on destination cell, type =, then click on the source cell. Under the Insert menu, choose Fill if you wish to duplicate a range of cells.
    This is a bit different from Microsoft Windows Excel, but you will soon get the hang of it.
    You can download the Numbers User Guide from the Help menu.
    Happy Macintoshing!
    Ian.

Maybe you are looking for

  • In iCal, how can I back up just one calendar?

    I have several calendars set up. How do I back up just a particular one? Thanks!

  • Tabbed browsing in IE 10 on Windows Phone 8

    Does Windows phone 8 OS suspend IE 10 tabs which are in the background ? Recently i was using my friend's Nokia Lumia 620 and i was surfing the internet. I had opened three tabs. i noticied that the small progress bar, that denotes how much the page

  • Sharepoint 2010 - Email integration

    HI there, I am working on something as follows: -> Few mail IDs in MS outlook ([email protected], [email protected]) should be configured in such a way that whenever a mail hits these mail boxes, that should be redirected to a Sharepoint library . In

  • Flash now working on upload.

    Hello, I am having a problem with my flash player showing in my page when I upload it to the server. I am using the component Slide Show Pro w/thumbnails which requires Flash Player 9 and Actionscript 3. I thought originally that was the problem but

  • AE CS5 "Options" for CC Particle World

    In CS5 the "Options" button is gone. I already know that features like floor and stuff are in the plug-in, but what about motion blur?