Can I complete a carrier unlock after I have already erased and reset my iPhone 5?

I recently upgraded to the iPhone 6.
After restoring my iPhone 6 from my iPhone 5 backup via iCloud, I erased/reset my iPhone 5 for resale.
In order to raise the resale value of my iPhone 5, I want to perform a carrier unlock.
I processed a request to unlock my iPhone 5 with AT&T, and they approved my request:
Thank you for contacting AT&T Customer Care about unlocking your AT&T Mobile device.
We have reviewed your request and confirmed that the device may be unlocked. You should complete the unlock process before porting out your number for use with another carrier.
Please allow 24 hours upon receipt of this notification to complete the unlock process.
1. Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2. Ensure the original SIM card that came with this device is inserted in your iPhone.
3. Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4. Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5. After restoring, your iPhone will be unlocked.
Considering I already erased my iPhone to factory settings, how do I complete the unlock process?
Do I need to setup my iPhone 5 again, and restore it from a recent backup, in order to unlock it?
And then erase it all over again?
Thank you so much!

ANSWER: All I needed to do was plug my iPhone into my computer and turn on iTunes.
As soon as the iPhone connected to iTunes, I received a UNLOCK CONFIRMATION message.
The AT&T Customer Service Rep also confirmed that the iPhone was unlocked from the AT&T account.
Hope this helps!

Similar Messages

  • I can not get itunes to open after I have downloaded it and closed it and tried to get bck into it

    I can't get itunes to open after i download it.  I close it to come back to it and it won't open or anything like it wasn't downloaded at all. Help please

    The file that I'm have issues with in itunes is the file called iTunes Libary.itl. 
    So just to get itunes to open I had to delete that file and then sync all of my music back into itunesday, is there anyway so I do not have to keep doing that?

  • How do I stop emails coming through to my mac after I have already read and deleted them on my iPhone?

    I want to set up my mac so that once the emails from hotmail have been received, read AND deleted on my iPhone, they don't pop up on my macbook when I get home (and visa-versa if I were to receive the emails on my mac first). Can anyone help, please?

    There's SO much to learn from the manual. This tip helped. And since this was an older message, I should say that I have a 5c iPhone now, but the messages here still apply. I didn't realize you could turn it off without deleting the account.
    Until there's a time when you don't have to mark every single message, one at a time to delete them, instead of a "delete all" or some similar command, then I've turned my mail off on both my iPad and iPhone. I only check mail on those when I'm on vacation and away from my home computer, and I've learned what a mess it was with hundreds of messages being downloaded. Apple has to do better with that delete message function. One at a time seems primitive. Otherwise, I'd leave the Mail App on.

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • After the last Os update, my ipod can no longer determine its location. I have already restored

    After the last Os update, my ipod can no longer determine its location. I have already restored

    Make sure you have the latest versiom of AirPort Utility installed >  AirPort Utility 6.3 for Mac

  • My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
    Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US
    Good luck!

  • Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss"  button at the botom of the screen.

    Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
    I appreciate if you could provide me support to solve this problem especially it consumes the battery a lot.

    Another post originally dated 5th Feb, 2012 with a slightly different unheard of error "%7D/JC".
    https://discussions.apple.com/thread/3710903?start=0&tstart=0
    The user also claimed that he didn't meddle with iOS. No solution could be found though.

  • I want to know how I can get all my stuff from my iPhone 3 to my new iPhone five after I have already set up from new phone?

    I want to know how I can get all my stuff from my iPhone 3 to my new iPhone five after I have already set up from new phone?

    You can restore a backup of the old device to a new one.  This will erase everything on the new one before restoring, so this may be an issue if you already have data on the new device. 
    To do a backup of the old device, iTunes is the safest route, in my opinion.  Many users have lost photos when performing a restore from an icloud backup.
    An icloud backup does not include everything.  For example,only photos in camera roll are backed up.  Also, music is not backed up since you get it back from itunes and (for purchased music) from the itunes store.
    To restore:
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your phone.  Then you will go through the setup screens again as you did when your phone is new, and when given the option, select Restore from iCloud Backup.

  • Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

    Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

    Try this:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How to get Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information I want to create a Paid Books Account use apple ID

    I was given this address from the Apple customer support team.
    I have an active existing iTunes store account and use the same Apple ID for signing into my iTunes Connect Account that distributes Apps.
    I have created some books using the iBook author and in order to distribute content on the iBookstore I have been told electronically that I need a new Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information valid until 2013?
    I want to create a Paid Books Account using the same email address, tax information and bank information. This has been most frustrating, as I cannot get passed the sign in section and there is no contact person I can speak to. I was of the understanding the iTunes connect account and the Developer programs which I paid good money for is all what I needed to be paid for selling iBooks on the iBookstore???
    I only have one email address and wish to also use it for the Paid Books Account. I have books ready to be exported and published.
    I am also having trouble locating and downloading iTunes Producer. I understand I need to have the Paid Books Account active to access the iTunes Producer program. Please help.
    See additional information below:
    What device did you use to connect to the store?  Mac computer
    Which operating system is installed?  Mac OS X v10.7.x
    What version of iTunes is installed on your computer?  iTunes 10.6
    Choose the iTunes Store or App Store for your country:  Other
    Please select your country:  Australia

    Hi Lrwill,
    If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
    Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
    Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
    Cheers,
    GB

  • I want to give my iphone to my freind and thus I tried to Erase all contents and reset everything. I went settings-general-erase and reset. But while it was being processed, power supply went off. I have connected back to power but after 4 hours no repson

    Can anyone advise me how long does it normally take to reset while doing- settings-general-erase and reset all settings.It has already taken 4 hours and only the apple logo is being displayed yet. I am little bit worried if the operating system will not be restored.

    Use the following steps to place your device into recovery mode. If the device is already in recovery mode, you can proceed immediately to step 6.
    Did you do this?
    Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPhone. When you reconnect the USB cable to iPhone, the device should power on.
    Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure the battery has some charge and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    If necessary, open iTunes. You should see the following "recovery mode" alert:
    Use iTunes to restore the device.
    If none of these works, visit your nearest Apple Retail Store, Apple Authorized Service Provider or wireless carrier.
    Cheers!

  • I have upgraded my iPhone 5 with iOS 7 and I can´t turn on location services. I have already twice restored the instalation of iOS 7 but no change. This should be the improvement of the apple software? Has anybody similar problem?

    I have upgraded my iPhone 5 with iOS7 and I can´t turn on location services. I have already restored the instalation of oOS 7 twice but no change. This should be the improvement of apple software? Does anybody have similar problem? Do you know how to solve it?

    A workaround is to reinstall lazy apps, mostly for those that were restored but don't appear on notification center, eg. Whatsapp. In my case I have more than 500 apps installed.
    We need a correct solution for this problem.
    I also had this problem on the past moving from 4s to 5.
    And now from 5 to 5s.
    The only notifications working after restore in my iPhone are those from Facebook.

  • Companies activate QM after they have already implemented the MM

    Hi guys,
    I read the help portal on the following:
    In some cases, companies activate QM after they have already implemented the Materials Management (MM) and Inventory Management (MM-IM) components productively. As a result, materials may have been posted to inspection stock type using the functions of the inventory management.
    In such cases, you can only activate inspection types for stock-relevant materials if you perform ONE of the following steps:
    Step 1 -  Post the goods out of inspection stock manually using the functions of the inventory management before you try to activate a stock-relevant inspection type.
    Step 2 -  Activate the desired stock-relevant inspection type(s) using the function for making mass changes to the inspection settings.
    My question
    1 - After step 1, how to make the stock post back into the Inspection Lot?
    2 - How, which tcode and step to perform on step 2, and what is the things to be aware of on this mass changes?
    Thanks
    Karen

    Hi, sujit,
    Just to double confirm.
    Does the following steps correct based on your direction:
    Letu2019s say for example, there are 200pcs of material A (i.e. this material A is going to be executed using QM functionality) currently reside at a storage location in QA stock type (i.e. IM stock type, not the QM stock type).
    And I would like to use the inspection type 01 to trigger a inspection lot for this 200pcs
    I execute the following steps:
    1 u2013 move the QA stock type of the 200pcs out of the QA stock type from its existing storage location to another storage location.
    2 u2013 activate the 01 inspection type using QA08 for this particular material in this plant.
    Does the above steps correct based on my example?
    thanks
    Karen

  • Itunes keeps asking to erase and sync after already erased and synced

    I've erased and synced my iPhone 4 and iPad 1 both 3 times, iTunes is asking to do this everytime I want to add something new. When I'm done I'd have everything checked in the upper left hand corner in itunes that I always want to sync i.e. music, tv shows, or books, but when I reconnect a couple days later some will be unchecked then I have to erase and sync. Anybody know why this is happening.
    Specs
    MacBook Pro: Mid 2012
    OS X: 10.8.2
    iTunes 11.0.1

    I think you can mark this thread as "answered".
    I had the same problem after picking up a replacement 4Gb iPhone from the Apple store last night. When I returned home and plugged in the iPhone it downloaded the 2.0.2 update and applied it prior to the first or two painfully slow restores on my G4. When the iPhone came back to life after the Restore I had the same situation you described, apps and data restored but no music and only the "Set up new iphone" or restore from backup option when the iPhone appeared in iTunes. Thinking I had done something wrong I told it to Restore the from backup again. Two hours later, same results.
    So I was pleased to see your message on the discussion board and possible solution. I couldn't wait to get home from work to try it. Well, selecting "Set up as new" fixed it. My iPhone appeared as normal in iTunes and I'm syncing my music as I type.
    Thanks!

  • I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its sasy the cose can only be used once. I dont have the movie and now i cant get it at all.

    I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its says the code can only be used once. I dont have the movie and now i cant get it at all. i paid for it when i bought the movie but now i dont own it at all. i feel cheated, somebody please help!

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

Maybe you are looking for

  • 2400MP display in black and white

    Can someone help me out,  Just last week my project only displays in black and white. I have gone through evey setting I can find but don't know what the issue is.

  • Install Disclosure Management Server

    Dear All, I'm going to install SAP disclosure management server. I have downloaded the install guide and application source file. The file which I download from SAP Portal is: SBOP Disclosure Management 10.0      51045945.zip The guide just said that

  • Missing table begin XSL context for: ?end if?

    I have 8 if clauses with grouping sub grouping data shown. when I try to validate my RTF file I am getting following error msg: [061112_073853972][][ERROR] [Line 3322.83] Missing table begin XSL context for: <?end if?> [061112_073854018][][ERROR] [Li

  • Tcode in display mode

    i want to give t-code me9f, as01 and j1iex in display mode i give but user is still able to use these in change mode also. any help. Thanks

  • How to configure HR Administrator

    Hi, I am going to deploy BP - HR Administrator in Portal 7.0. Could any of you please guide me with some documents explaining the process right from the beginning? Greatly appreciate your inputs. Thanks. Venkat