Can I compress a 10 second video to 40Kb?

I am doing some ad's for a customer. They are about ten seconds each. The place the ad's are going won't allow a file size of more than 40kb. The videos have to be in 728x90 and 300x250 format. How can I compress them to under 40kb without having to change the format, I think if I have to sacrifice quality it will be ok, I just want to get these ads out there. Thanks!

Here is the bad news. To test this out I created a Photoshop image at 728X90 pixels and exported it to a really low quality jpg. The faces in the image were still recognizable, but it looked pretty bad.
The file size came out to 6KB. Ten of those would be 60KB. So if you only had one frame per second and were willing to have terrible quality, then you would still have a file size 50% larger than you are allowed. And that assumes that you meant 40KB and not 40kb.
In other words, it can't really be done.
I think you might have misunderstood the requirements. You see, a high quality export of that same image came out to 64KB. So unless your ad is a single still image, you are not going to get it under the limit you said was given to you.
Perhaps they meant 40MB?

Similar Messages

How can I compress a 70min HD video to a 4.7GB dvd without lose quality?

I'd tried several formats and presents in order to fit in the dvd but it lost alot of quality

Comparison picture of video screen sizes http://forums.adobe.com/thread/1120039 shows how much is lost when going from HiDef to Standard Definition

Efficient compression of iPhone 6 videos

Photos for Mac + iCloud Photos has significantly improved my photography workflow: It is now much easier to keep all of my family photos and videos organized (side bar: favorite smart album is album = none). With 140GB in my photo library already though (on the 200GB plan), I try to save space where I can. Compressing my iPhone 6+ videos is one area that I hope to improve upon. I usually record in 30fps on the phone and use Compressor's Apple Device (Best Quality) export/transcode option to convert the videos. The process is slightly combersome though: (1) export the video from Photos for Mac; (2) compress the video with Compressor; (3) add it back to Photos for Mac; and (4) finally correct the EXIF date/time manually. Does anyone have a more efficient workflow to accomplish this objective (possibly using Automator)? Any help would be most appreciated. Thanks, ~Jim.

Russ,
I store all of my videos in iCloud and then sync across my various Apple devices. If / when I edit a specific event (e.g. multiple video segments of my son's birthday party), I use either iMovie on an iOS device or iMovie on my desktop (haven't purchased FCP yet). Once the movie is published and stored in iCloud, I go back and delete the various video segments that were used to create the final movie. Does that make sense?
In a nutshell, everything is stored in iCloud and synced across my iOS devices and Photos for Mac. I'm sure, eventually I'll run out of online space and be forced to store various videos offline (I'll likely continue using Photos for Mac and simply keep the videos as reference files outside the library)...the goal is to manage the size of the videos efficiently in order to keep all of my photos and videos in iCloud for as long as possible. I manage the size of the videos my using Apple's Compressor. I just wish there was a nose streamlined method of exporting the video from Photos to Mac to Compressor and then back again.

Can I add a Second Video card to my power mac g5

Hi all,
I have a Dual 2.5GHz PowerPC G5.
is it possible to add a second video card to this system. I want to have the possibility of having 3-4 displays.
if it can be done.. do I need a pci or pcix card and can someone recomend one that is available and of good quality..
thanks

Yes you can add a second card but you need to be sure if your machine is pci, pcix or pcie. The 2.5ghz G5 Quad is a pcie machine. I added a second 256mb card to it and now an running 3 24" and 1 17" monitors. Tom

HT4858 My iphone5 was stolen (second time) :( How can I recover my photos and videos on icloud? Last time they did not all come back

My iphone5 was stolen (second time) How can I recover my photos and videos on icloud? Last time they did not all come back. Specifically I need photos I took 1 day before it was stolen.

If they are in photo stream and your computer meets the minimum system requirements (OS X 10.7.2 or higher and iPhoto '11 9.4 or later or Aperture 3.4 or later; or Vista SP2 or later if you have a PC), set up iCloud on your computer and enable photo stream, as explained here: http://www.apple.com/icloud/setup/. You'll get any photo stream photos from the last 30 days.
Camera roll photos are stored in your iCloud backup, and can only be recovered by restoring the entire backup to another iPhone or iPod Touch that is running the same or higher version of iOS as the phone you backed up.

How do i watch tv shows after i purchase them, i can only view 30 second videos

how do i watch tv shows after i purchase them on itunes, i can only view 30 second video?

Try finding the show's icon, swiping it from right to left, and choosing "Delete".

Why can't i send longer than a 30 second video message?

Why can't I send longer than a 30 second video message on my Droid Maxx?

The text message application and system restricts the maximum size of the file transfers. The resolution of the phone camera also contributes to the size of the videos.

Can only record 5 second videos

My wife's incredible only records 4-5 second videos can anyone help us. I have tried settings and must not be doing right because my Fascinate I do long ones with no problem. Have incredible on lowest resolution and will only record 5 seconds

budone wrote:
OK, have her go into the camcorder. Click on the arrow on the left of the screen. Now click the Settings icon. (The bottom one that looks like two gears)
Scroll down and click on the, 'Recording Length' button. Have her change it to 1,2,3 minute or unlimited.
She will be all set.
PS I just moved from the Detroit Area. All I miss are my dear friends.
Thanks I will pass it on and Im in Royal Oak and this is not for my wife I screwed up when I wrote it I meant to say daughter who is in S.C.

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
Thanks
Jeff Pulera
Safe Harbor Computeres

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

How do I add a second video card to my Compaq Presario CQ5300F Desktop?

I want to install a second video card to my Compaq Presario CQ5300F Desktop so I can use two monitors. What card should I get?

Here are the specs for your Compaq Presario CQ5300F Desktop Computer. According to the specs, this model supports one VGA output via nVidia GeForce 6150SE onboard integrated graphics. This model also has a PCIe x16 graphics card expansion slot which will accept a PCIe x16 graphics card. According to the specs, installing a discrete graphics card in the PCIe x16 slot will disable the onboard integrated graphics.
The graphics card you purchase must support both monitors you wish to use with your computer. Additionally, most retail graphics cards require a 300 watt or greater system power supply. Currently , your computer has a 250 watt power supply and it will need to be replaced. Please consider the Corsair CX430, CX500, or CX600 series of power supplies to meet the new graphics card power requirements.
Alternatively, if this is mostly for word docs, spreadsheets, day trading and light video, you may wish to consider a USB-to-video adapter such as the eVGA UV Plus+ UV39 or one of the many other adapters on the market.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can't transfer a slo-mo video from iPhone 6 to PC

I love my iPhone 6, but it has some quirks. Here is one of them. The slo-mo feature is amazing at 240 frames per second. However, it is not good if I can only view the show motion video on the phone itself. I have tried iCloud, Verizon Cloud, and Google Drive. I also have an app that directly transfers files via wi-fi. None of these work. They either show the video at normal speed or stutter through the slow motion portion of the video - probably due to the player not being able to deal with the 240 fps. I have done some web searching and have learned a little. As I understand it, the video file somehow informs the player (I've tried Windows Media, Quick Time, and Irfan View among others) that it should play the slow motion area at the recorded rate of 240 frames per second, yielding a normal playback appearance. Some of the solutions offered have been to upload it to you tube and then download it from there, load it into a video editor and set it to play everything at 30 frames per second, and other Rube Goldberg methods. I just want to transfer it from my iPhone and have it play correctly without any editing. Is there a player that can do this? Or, is there an easy way to get standard video players to play at a fixed speed and not switch to the fast speed for slo-mo?
Is this the appropriate forum to ask this question? My carrier is Verizon and I purchased the iPhone 6 through Verizon. I will try posting this on the Apple forum. I know that a lot of users are having this same problem.
Dave W

Weth,
Thanks for suggesting truslomo to me. It appears to be just what I need. I am able to use it to convert my slow motion video and then transfer it to my PC. It plays smoothly. However, I'm puzzled about how it actually works. I was able to produce a slow motion video from on I recorded at normal speed. It must use fill-in frames between the 30 fps of the original video. The playback is a little jerky. Also, truslomo has 2 options: a turtle (120 fps>) or a snail (240 fps?). Only the turtle is available when converting normal video. I need to take more videos (or write to the author) to understand that it is really using all the 240 fps to produce the final video.
You also suggested uploading to You Tube. That is not something I want to do. You Tube is public and I like to do a lot of testing of different techniques. Having to upload each video, then download it, and finally delete it from You Tube is too many steps for me. Also, it's one more site I have to give my email address to.
Thanks again for suggesting truslomo. It's too bad that Apple has put that feature into the phone.
Dave W

Can't play any music or videos after 7.4.3.1 upgrade

Any body seen this type of problem after the update??
After upgrading to iTunes 7.4.3.1 I can't play any music on my PC. iTunes allows me to select the tune piece from the library, loads the player and just sits there not advancing the song.
If I try to play am MP3 through Windows Media Player same thing happens. I also can't play any of the video files I have on dick either. They play a few seconds worth, pause, then play a pit more and it repeats.
Thanks
Jay

+If I try to play am MP3 through Windows Media Player same thing happens.+
If two of your media players are doing that, we'd better have a look in your control panels.
Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab.
Is the correct default device showing up in the "Sound Playback" area?

HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

In Serial Element mediaPlayer.bytesLoaded for second video includes first video bytes

Hi,
I am using SerialElement for displaying ads and then main video so in my player I set my loading of the progress bar using mediaPlayer.bytesLoaded but the problem is that the loaded bar for the second video includes the loaded bytes from the first video also so my loaded bar gets set slightly larger and when I try to seek then actually there are no bytes at the end of loading bar and seek is not possible for the end portion, it gives a very bad user experience. I tried to confirm this behaviour by taking a 20 min video as first video and then main video so when second video started buffering I traced the mediaPlayer.bytesLoaded and I got value around 760sec, and I dont think my bandwidth is so good that it will load 760 sec video in few seconds.
Is this behaviour expected? If this is the case then how can I clear the bytes loaded for the second video?
Regards,
Amit

I've been fixing some bugs in this area, you might want to upgrade to public trunk and see if your problem has been resolved.

Can I compress a 10 second video to 40Kb?

Similar Messages

Maybe you are looking for