Can i configure a network with ACS and ISE?

I have both acs and ise, how do i integrate these appliance to work togheter?
Thanks

ISE does not interoperate with Cisco Secure ACS deployments. The Cisco Identity Services  Engine can work in tandem with Cisco NAC Manager to provide the same  profiling service as the NAC Profiler, which has reached end-of-sale  status.
Existing Cisco Secure ACS customers using network  access can easily migrate to the Cisco Identity Services Engine platform  using migration part numbers and tools. However, existing Cisco Secure  ACS customers using TACACS functions will not be able to migrate to the  current version of ISE for network device identity management which is  often acceptable for customers who prefer to keep user and network  identity on separate systems.

Similar Messages

  • I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

    Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

    Welcome to the Apple Community.
    Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
    Firstly, are you receiving any date and time errors when you turn on your Apple TV?
    Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
    If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

  • Hi there!  We just got an ipod touch 8G.  We have wireless internet, but can't join the network with the ipod touch!  Very frustrating and we have tried all of the troubleshooting suggestions on the support site.  Help!  The router is a linksys WRT120N.

    Hi everyone!  WE just got an ipod touch 8G.  We do have wireless internet, but can't join the network with the ipod touch.  Message comes up.."unable to join the network".....very frustrating!  We have tried all trouble-shooting suggestions on the site, but nothing is working.  Anyone out there got any ideas for us??  The router is a Linksys WRT120N.
    Thanks for any help any one can give!!!

    Does the iPod connect to other neworks?
    Do other devices connect to the network?
    What encryption are you using?
    How you tried changing the type of encruption? Changing to no encryption?

  • Full mesh VPN solution for on MPLS network with PE and CPEs

    Hi,
    We are trying to evaluate some best solution for Hub-Spoke mesh vpn solution in a MPLS network. The VPN hub router will be in PE router and all the VPN spoke will be in CPE.
    Can someone please let us know what will be the best vpn solution, we understands that there will be some technical limitations going with GETVPN but still we did counld find any documenation for possiblity of using DMVPN.
    How about the recent flexvpn, can fex-vpn work on this requirement, where can i get a design/configuration document.?
    thanks in advance.

    Hello,
    GetVPN is intended for (ANY-to-ANY) type of VPN communication, over an MPLS network with Hub and Spoke Topology, your best Option is to look for Cisco (DMVPN) implementation where this type of VPN is primarily designed for Hub & Spoke.
    Regards,
    Mohamed

  • Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?

    pcbjr wrote:
    Topic title pretty well sums up the question.
    I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
    We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
    So, can the Extreme act as an "extender" only, in lieu of using an Express?
    Hiya.
    You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

  • Can't configure airport express with laptop after 10.5.6 update

    I can't configure airport express with laptop after 10.5.6 update
    the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
    Other computer gets to the configuration screen without problem.
    And the airport utility describes the airport express like this: syAP.802.11format

    I downloaded the airport utility and re-installed
    and the problem was solved

  • Unable to connect to network with Safari and Software Update

    A user I support has encountered a problem with networking. He is unable to connect to the network with Safari and Software Update, but IS able to connect and surf with Foxfire and some other programs. Another unusual symptom is that he actually can connect to one web site (which is in his Bookmarks Bar) with Safari, but can't connect to anything else. He's also unable to navigate off of that one site he connects to. When he runs Network Diagnostics, he gets all green lights (no problems). He has fixed permissions, deleted Safari Cache and .plist, rebooted - not fixed yet. He's using 10.4.8 on a PowerPC G4. Any ideas appreciated (this is the wierdest I've seen in a while!).

    Here's what he did. After reading your post, he created another location in his network preferences, entering EXACTLY the same info that was in his old location (he even used the old DNS addresses), except using a new location name. Then he chose the new location and "everything worked". It's one of life's great mysteries. Thanks for your help - it is appreciated.

  • Can I extend a network with AE, then plug into it?

    i have checked but can't seem to answer this exact question:
    i have a time capsule and my G5 tower is plugged in using ethernet (no wifi card). I also have a MBP. i am moving my G5 one floor down where there is no ethernet plug, but the wife reaches.
    can i extend the network with an AE and then PLUG the G5 into the AE? or will i need a wifi card?
    thanks in advance
    keith

    You would use AirPort Utility to first check the settings on the Time Capsule
    AirPort Utility - Manual Setup
    Click the Wireless tab below the row of icons
    Make sure there is a check mark next to "Allow this network to be extended". Otherwise, things won't work.
    Note the exact Security setting you are using for use with the AirPort Express
    Use AirPort Utility the same way for the Express
    Click the Base Station tab to name the device, assign password, adjust Time, etc
    Click the Wireless tab:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the Time Capsule network
    Check mark next to Allow Wireless Clients
    Wireless Security = Same setting as the Time Capsule
    Wireless Password = Same password as the Time Capsule
    Confirm Password
    Update to save changes. You should have green light in 30-40 seconds and the ethernet port will be active.

  • Can't see wireless network with Windows Vista

    I have the Airport Extreme N and two PCs, one with W XP and one with W Vista. Everything works fine with the XP PC. On the Vista PC, I can connect to the network with LAN, but I can’t see the wireless network.
    The W Vista PC can identify other networks around the block, so the Broadcom 802.11g network adapter seems to work fine. The wireless runs on channel 13, which is OK for the XP PC. I have installed the latest update for the Airport Extreme.
    Any suggestions to what I can do to get the W Vista PC working on wireless?
    Best, Kasper

    Hi,
    I also have the same problem.
    My belkin wirelss router is set to channel 13, therefore my macbook cannot see this network when it search's, for the above reasons.
    However unlike the situation above I am unable to change from channel 13 as we have discovered in the past that this is the only channel that is not in use by other networks around our area. The rest gave us interferance troubles.
    I have a number of windows laptops in the house and there is a setting that you can change so the laptop will search for channel 13. I was wondering if anyone is aware of a setting on the macbook that will make the airport card search for 1 - 13 not just channels 1 - 10 as it is now.
    I thought I would add this question to this topic as it is very similar. I hope I was correct in doing so.
    Thanks,
    Josh
    Macbook   Mac OS X (10.4.8)  

  • HT4972 can't connect to network with linksys e2500

    Can't connect to network with linksys E2500. Can anyone help me?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick

    Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick
    THE use of the apple support is a mess also.
    I want to be able to use my MAC fully and easily like I used to with Snow Leopard. 
    What is wrong with this maverick OS?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

    Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet. 

    Yes you can.  All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

  • Can't not text pictures with 4s and other texts dont always go thru WHY?

    Can't not text pictures with 4s and other texts dont always go thru WHY?

    Need more information...  Is it that you don't know how to add a picture to a text?  You know and have tried but gotten an error message?  Got no message, but the receiver does not get the text?  Are you sending as iMessage or SMS, or MMS?

  • Can't connect to itunes with iphone and followed all toubleshooting problems!!

    can't connect to itunes with iphone and followed all toubleshooting problems!!

    Try taking a look at this Apple doc -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
    It should be able to help with that error.

  • I all of a sudden can't view my email with yahoo and my work email

    Hello,
    I have upgraded to Maverick and now I can't view my emails with yahoo and my work's email.
    Is there an easy fix for this problem?
    Thanks,
    Helen

    Hello,
    I have upgraded to Maverick and now I can't view my emails with yahoo and my work's email.
    Is there an easy fix for this problem?
    Thanks,
    Helen

Maybe you are looking for