Can I configure FCoE between UCS Fiber Interconnect and Nexus 5k?

Hello,
I have 2 UCS with 2 pair of Fiber interconnect 6120XP and they are conencted to Nexus 5k. Currently 10Gig Ethernet and FC are used for connectvity. I have 8 port FC module in Nexus 5k. Storage is connected to Nexus 5k over FC. I would like to change the FI to Nexus 5K connectvity and configurtation with FCoE so that I can get few more free FC ports for stoarge connecting. Could you please help me whether it is possible with Nexus OS version 5 and how do we do this?
Thanks.

What storage are you using and is it capable of running a CNA?
If so, one configuration I have used to reduce ports out of the storage and reduce the need for a high density of FC ports is to run FCoE from Storage to 5k, then trad FC from 5k to FI.
With the 5k acting as a bridge between FCoE and FC you don't hit the single-hop limitations that currently exist within the protocol.
Sent from Cisco Technical Support iPhone App

Similar Messages

Can I sync email between iPad mini, iPad, and MacBook so that if I delete email using one device, it will also be deleted from the other two?

Can I sync email between iPad mini, iPad, and MacBook so that if I delete email using one device, it will also be deleted from the other two?

You have to set up the email account using IMAP instead of POP.
What type of email address is it? Yahoo, hotmail, gmail, etc?
~Lyssa

Can FaceTime be used between the Cayman Islands and the US

Can FaceTime be used between the Cayman Islands and the US?

FaceTime can only be used where WiFi is available, but can be used internationally.

Monitoring traffic between UCS fabric extenders and fabric interconnect?

What is the best way to monitor the traffic between UCS fabric extenders (chassis) and fabric interconnect? Specifically I am looking for parameters to keep an eye on to determine when we may need to move from 2 links per fabric extender to 4 to handle greater IO needs.
Thanks.
- Klaus

One way you could monitor usage is by looking at the interface stats just as you would for any switch uplink.
Connect to the Cluster CLI
connect NXOS
Look at the input/output rate of your Server Uplink interfaces.
In my example I'm using fixed ports 1 through 4 on my FI's connecting to the IOM of the Chassis.
UCS-A(nxos)# show int eth1/1-4 | include rate
30 seconds input rate 17114328 bits/sec, 1089 packets/sec
30 seconds output rate 8777736 bits/sec, 693 packets/sec
    input rate 5.07 Mbps, 198 pps; output rate 1.03 Mbps, 99 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 2 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 31680 bits/sec, 20 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 30.89 Kbps, 18 pps
30 seconds input rate 2376 bits/sec, 0 packets/sec
30 seconds output rate 1584 bits/sec, 1 packets/sec
    input rate 1.58 Kbps, 0 pps; output rate 1.58 Kbps, 3 pps
If you notice your two links pushing near 10G consistently, it might be time to add another 2 link.
Other than this you can use SNMP to log the stats and look based on daily/weekly/monthly usage.
Robert

How can I configure MA to display "speaking" OpCode and Task names

If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
Regards,
Alexander
Kind regards, Alexander

Hi Paul,
please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
part of the manifest is here:
<tasks>
<task name="ReadingFromGdb" value="1"/>
<task name="LogReadPreInvoke" value="65532"/>
</tasks>
<opcodes>
</opcodes>
<keywords>
<keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
<keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
</keywords>
<events>
<event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
</events>
<templates>
<template tid="LogGdbReadPreInvokeArgs">
<data name="fullName" inType="win:UnicodeString"/>
<data name="methodName" inType="win:UnicodeString"/>
</template>
I hope, it helps you to understand details of my questions.
Regards,
Alexander
Kind regards, Alexander

Can't use AirDrop between my iOS devices and my MacBook Pro

Help! I can't get Airdrop to work between my MacBook Pro and my iOS devices. I believe all settings are configured correctly but something's off somewhere.
MBP - late December 2011, now running 10.10. Wifi and bluetooth are enabled. Security privacy settings allow Finder inbound connections.
iPhone 5S and iPad Air - both at 8.1. Wifi and bluetooth enabled, AirDrop settings on both are 'contacts only.'
I'm logged in to all three devices with my common iCloud account.
I go to share a photo from my iPhone and only my iPad appears as a potential recipient. Same from sharing from my iPad - only my iPhone appears. On my Mac's Finder AirDrop, nothing appears within, even when both my iOS devices are on.
I've been looking forward to the idea of Mac-to-iOS sharing, and something somewhere is keeping this from happening.
What should I check for next?

For AirDrop between IOS & OS X, you'll need a MBP from 2012 or later.
Your 2011 Mac can only do AirDrop between Macs that support AirDrop.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model.

Error while configuring SSO between Portal 7.0 and Operating System.

Dear all,
I am having an issue,i need to configure SSO between the Portal 7.0 and operating System.I have followed both the Kerberos as well as spNego wizard methods,but i am not able to configure UME settings as we are using datasourceConfiguration_abap.xml. I tried to edit the datasource confuiguration file but after editing the server is not starting.
Please let me know the steps i have to do to edit the datasourceConfiguration_abap.xml
We are not able to Map the Service USer to the UME CONFIGURATION XML File.
Thanks
Ravi.S

Ravi,
If you have successfully configured the SSO, please pass on the document if any you have.
Regards,
Mohammad.

Can I configure Mac Mini with Fusion drive AND a secondary internal 1tb HD?

I am about to order an new Mac Mini, and would like to have the speed of the new fusion drive, but would also like to have the option of adding a secondary internal 1TB hard drive.
I know I can add an external HD, but I really like the increased speed, and access times of an internal HD.
Secondly, since I am about to make this purchase, I am curious if there is any word on the street about any dramatic upgrades or changes to the Mini due to come out at the June conference, or in the fall?
Thanks for the input.
Mark

The only clue you really have about possible upgrades, is to look at the product cycle in the past.
The average product cycle for the Mac Mini is 381 days, the last upgrade was 209 days ago, so it's not very likely we'll see a major update in june.
you can look at product cycles of mac mini (and apple products in general) on this page:
http://buyersguide.macrumors.com/#Mac_Mini
keep in mind this is a website based on rumors, only Apple knows.

Can service broker work between SQL Server 2008 and 2012, ssbdiagnose returned an error !

Hello,
We have a setup of three applications that sends and receive messages using Service Broker.
One part is on a server, we'll call 'S' have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64)
The other part, we'll call 'E' use to have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64).
But I am migrating these apps to a new server, we'll call 'C' that has: Microsoft SQL Server 2012 (SP1) - 11.0.3339.0 (X64)
I have used this command line tool to test it :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/CService" -S "ServerC" -d EDatabase TO SERVICE "//S/S/ECService" -S ServerS -d SDatabase ON CONTRACT //E/S/ECContact
It returned:
An internal exception occurred: Cannot read property ServiceBrokerGuid.
This property is not available on SQL Server 7.0.
So, I am wondering, is it supposed to work between these two versions ?
As more info, in the previous setup, it was using certificates but I have changed the Endpoints to use only Windows Authentication.
Thanks for any advice.
Claude

Hello,
Many thanks to you and Fanny for looking at my question.
In fact I was unclear, please let me provide you with more details.
Maybe the use of "always on" plays a role here... I will use different names so it might be clearer...
ServerSoftware2008 server has SoftwareDB database.
ServerEmployees2008 server has EmployeesDB database.
Service broker use to work fine between those two above, with certificates.
The new server comes in, two virtual servers with SQL Server 2012 Enterprise Edition with Always On.
I call it ServerEmployeesC but this is the listener. Behind, there is ServerEmployees2012_A and ServerEmployees2012_B and of course, both have a EmployeesDB database.
So, to use SSBDiagnose, I wonder if I need to use quotes around values and if I can use the listener name with FQDN. Concerning the use of instance name in the syntax, there is only one instance per server, is it best practice to use it on the command
line ?
Here is again, my command :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/E" -S "ServerEmployeesC.sub.acme.com" -d EmployeesDB TO SERVICE "//S/S/E" -S "ServerSoftware2008.sub.acme.com" -d SoftwareDB ON CONTRACT //E/S/E
Again, many thanks for any help you will be able to provide, the people who configured this application at first are no longer here and I am trying to configure the new server in a task of migrating to SQL Server 2012 for one of the two servers involved
and I am having a lot of problems doing it.
Best regards,
Claude

How can I sync calendars between my mac, iphone and android phone

I use an iPhone as my primary phone, but do travel alot and need to have a secondary phone with a local SIM card when I travel. For this reason, I am considering buying an android phone. One of my major concerns though, is how would I be able to (if possible at all) sync calendars and contacts between all the devices. Today with iCloud I can get the iCloud syncing between my iMac, Macbook Pro, iPad and iPhone. When I introduce an android device, I am going to have to bring in Google calendars as well, so how do I get my iCal calendars to automatically sync to google calendars without having to creat duplicate calendars or without having to basically migrate to using only google calendars? Same goes for the contacts?

On your Mac and iPad, turn off iMessage.

Can I copy emails between an IMAP account and an Exchange account, via Apple Mail client?

If I have an IMAP account configured in my Apple Mail client profile, and then I also add an Exchange 2010 Server account to that same profile, can I use the Apple Mail client to copy folders and messages from my IMAP account, into my mail store on the Exchange Server account?

Pop mail accounts must be set up to 'leave messages on the server'.
check this before using.
* Tools > Account Settings > Server Settings for the mail account
or
* menu icon > Options > Account Settings > Server Settings for the mail account
select: 'leave messages on the server'
optional: select: 'for at most xx days' this will delete anything older than specified number of days select 'Until I delete them' when you delete an email it will be deleted off the server.
click on Ok to save settings.
Pop mail accounts only look at Inbox and download whatever has not been previously downloaded regardless of whether it has been read or not. They cannot access nor download from any other folder on the server.
If you wanted to download emails in other fodlers, you would have to move emails into the Inbox in order to download them and this may not be very practical in your situation.
What you can do is synchronize your IMAP folders to get a copy downloaded to your IMAP mail account.
Then go into 'offline' mode to stop any further synchronizing as synchronized folders do get updated.
MozBackup tool could now be used to backup the Profile as synchronising created mbox files which contain emails.
You can also do the following to get a copy outside of the IMAP mail account:
Create the same folders in 'Local Folders'.
Then right click on email and 'copy to' and select Local Folders and the folder you require.
Putting a copy in Local Folders means these emails are also on your computer and they are not influenced by anything you do in the IMAP folders.
You would need to backup emails in these folders.
See info:
* http://kb.mozillazine.org/IMAP_backup
MozBackup:
* http://mozbackup.jasnapaka.com/
ImportExporttool:
* https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

How can I establish connection between DirectSoft Programming software and LookOut

Hi,
        I am working with a DL06 PLC. I am trying to a develop a LookOut Direct HMI for this tainer. I would like to know if there is any option in LookOut where it allows me to run small parts of PLC code along with HMI so that i can toggle discrete output. To be more speicifc i have X0 - 16 input bits and C0 - 16 status bits. I have to develop a logic in PLC programming so that the status bits toggels Y0 - 16 outputs on the tainer. So can you please let me know if there is any way of establishing communication between LookOut HMI and DirectSoft 32 PLC programming software.
Thanks
regards
Koneru

Kone,
Have you tried mathematics.
I use something like:
ADec2Bcd      = sum(mod(000,16),mod(trunc(000/16),16)*10,mod(trunc(trunc(000/16)
                /16),16)*100,mod(trunc(trunc(trunc(000/16)/16)/16),16)*1000);
Simply replace the 000 with the value to be converted, can be a numerical object.

Can i configure each ethernet port to fixed and auto ip adresses?

Hi, i will be using a SSL Matrix Controller with Logic 9. This connects thru ethernet and requires a FIXED address. However, this Mac also needs to connect to the internet which doesnt use a fixed a address. Can I keep port one the way it is, and configure port two as fixed and have them both work properly? Are they completely independent of each ther?
Thx

Do you use a Router that you control?
If so, you can have fixed addresses easily -- just assign an address Manually that is in the same range, but above or below the ones your Router is likely to pass out automatically.
You can also assign a manual address to the second Ethernet port, but using it this way is complex. What does the device maker recommend?

HT5887 Can I use Airdrop between my iPad Mini and my Mac desktop? If so how?

I am trying to use Airdrop to share files between my iPad and my Mac desktop. I can back up my iPad to the pc over the wireless network but I cannot get Airdrop to work.
Any suggestions appreciated.

No, you can only AirDrop between iDevice only (tap to enlarge image)

How can I insert space between a bullet character and text?

I imported my FrameMaker file and template into RoboHelp 7.
After the conversion to RoboHelp, the bullet characters are too
close to the paragraph text that follows. I was able to change the
span's spacing in the Font dialog box's Spacing tab to expand the
space. How can I apply this to all bullets in the topic?

I am so dense... I re-read this thread.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=680&threadid =1348980&enterthread=y
AJ Owens suggested that we remove "Pre" from the User Defined
HTML Tag field box in the Style Settings dialog box. When I
initially accessed this box, I experimented with checking and
unchecking the Convert Autonumber to HTML list box, but it never
occurred to me to clear the User Defined HTML Tag field of "Pre".
Now that I have cleared it, I am able to make changes in the Style
Sheet Editor. (I can expand spacing so that I now see more space
between the bulleted and numbered characters and the text that
follows.)

Can I configure FCoE between UCS Fiber Interconnect and Nexus 5k?

Similar Messages

Maybe you are looking for