Can I connect 2 monitors and an ethernet to my macbook pro using the 2 thunderbolt and hdmi connectors?

I have 2 monitors and an ethernet cable to connect to my mac book pro. Can I use the 2 thunderbolt connectors for one of the monitors and the ethernet cable and the hdmi for the 2nd monitor?
MacBook Pro
Retina 15in Mid 2014
Model Name: MacBook Pro
Model Identifier: MacBookPro11,3
Processor Name: Intel Core i7
Processor Speed: 2.5 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
System Version: OS X 10.9.5 (13F34)
Kernel Version: Darwin 13.4.0

Yes.
You can have one HDMI (or DVI monitor via HDMI to DVI adopter) on the HDMI port
Another monitor via one Thunderbolt port and suitable adopter if not a displayport/mini displayport monitor
And use the other Thunderbolt port for Ethernet via a Thunderbolt to Ethernet adopter.
For the future, this is the Mac Pro desktop forum

Similar Messages

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Can i use my imac g5 just as a monitor if i buy a 13" macbook pro? The G5 monitor is larger. Thanks for any help!

can i use my imac g5 just as a display monitor if i buy a 13" macbook pro? the g5 screen is larger. can it hook up to the laptop? thanks for any help!

You need to use a product such as ScreenRecycler to do that. All of those products work over a network connection; direct video in isn't available on an iMac G5.
(72069)

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?

I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
Thanks,
Alex

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan

Connecting a Samsung 5500 32" Smart TV to Macbook Pro using a Belkin HDMI to MiniDisplay Port.

I have a new Samsung 5500 32" Smart TV, and I'm trying to connect it to my Macbook Pro using a Belkin HDMI to MiniDisplay Port. The computer will not recognize the TV as a display (the arrangement tab will not show up) and the TV will not show the computer as a source. Does anyone have any suggestions?

Sorry correction. That is a Mini DP port to HDMI that I am trying but I get no indication Mac is seeing TV. Please help.....

Can't format my macbook pro using the instructions on here or google or youtube. Please Help!!

I'm trying to format my macbook pro using OS X 10.5.8. I've tried all the instructions that I could find, but still no luck.
Instructions examples:
1) Go into disk utility and erase the hard drive.
Problem: when I do that, it doesn't let me because the erase button is in the "greyed", so I can't click on that.
2) Restart the computer and hold down "c" and follow the instrctions...
Problem: I did that, but it just restart normally, it doesn't take me to some special screen.
3) Restart with the Mac OS CD installer and hold down "c" as it reboots.
Problem: same as number 2.
4) Restart and hold down "option" - disk utility - erase HD
Problem: I did that, and the hard drive icon with the arrow pointing up pops up; however, when I click on it, it just boot up as usual, and when I go into disk utility, I had the same problem as number 1.
This is really frustrating!! Please help!!
Thanks all!

Steve_13 wrote:
I'm trying to format my macbook pro using OS X 10.5.8. I've tried all the instructions that I could find, but still no luck.
Instructions examples:
1) Go into disk utility and erase the hard drive.
Problem: when I do that, it doesn't let me because the erase button is in the "greyed", so I can't click on that.
That only works for other drives/partitions, you can't format or erase the boot drive/volume/partition obviously.
2) Restart the computer and hold down "c" and follow the instrctions...
Problem: I did that, but it just restart normally, it doesn't take me to some special screen.
No disk inserted, you need a bootable disk to use the c key at boot.
3) Restart with the Mac OS CD installer and hold down "c" as it reboots.
Problem: same as number 2.
Perhaps you held it too late.
4) Restart and hold down "option" - disk utility - erase HD
Problem: I did that, and the hard drive icon with the arrow pointing up pops up; however, when I click on it, it just boot up as usual, and when I go into disk utility, I had the same problem as number 1.
The option key held at boot gives you Startup Manager, which gives you a choice of bootable options provided the boot cd is inserted obviously.
If you didn't wait for the cd boot option to appear and clicked the hard drive and arrow right away, it's possible you missed the cd boot option as it takes a bit longer to appear on the screen.
If you went all over the above and can't boot from the 10.5 cd, then what likely occured is your operating system was upgraded to a later OS X version like 10.6 or later and the firmware has been updated to ignore booting or recognizing that 10.5 boot disk as that operating system is now obsolete.
Another option is your using the wrong 10.5 disk, like it's from another model of Mac with different hardware drivers, thus can't be used on your machine.
Sometimes the disk is a retail copy, but is only for compatible Mac's that came PRIOR to the release of the retail disk, obviously not for Mac's that came afterwards because of new hardware drivers not on the burned disk.
If your machine is on 10.4, it might not have enough RAM for 10.5.
If your machine is on 10.5 now, then you should be able to boot from the disk that came with the machine, unless it's defective, scratched or dirty.
If your Mac is a Intel processor Mac, then you should be using 10.6 at least now, it's still getting updates to 10.6.8 (not for Safari or Java 6, but you can disable both and use Firefox)
Usually a 10.5 issued Mac is too old for the later OS X versions of 10.7 and later, perhaps the MacPro tower being the rare exceptions.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Also usually a 10.5 era issued Mac is beyond it's end of life stage, likely to die soon and not worth spending great sums of money to upgrade RAM and all software for 10.7 and beyond, your better off buying a new machine for 10.7+ or use it on 10.6.8 max until it drops dead or sell it online.
You didn't state your Mac's model identifier, it can be gleamed from System Profiler or Apple menu > About this Mac > More information.
With the model identifier, current operating system version running and the RAM amount installed, we can look up the machine on our database and recommend a course of action or if you cannot install 10.5 on that machine.

I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

Hi all,
I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
Connecting directly to iTunes using a four digit passcode.
I've tried both methods, and neither work!
Here's what happens for each method:
From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
I'm kind of at the end of my rope here. Anyone?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

Can I connect my 35 mm film camera to my MacBook pro computer?

Hello. I would like to know if I can input images from my 35 mm film camera to my MacBook Pro computer. Is the use of a scanner the only answer? If I purchase a digital camera, I would like to have one that requires low energy from a battery. I am looking for one that has 12 megapixels of resolution and has an adjustable focal length from 25mm to 180 mm. I read that digital cameras require much energy from a battery. And I would prefer to use a small battery over one that is a NiMh or is a lithium ion.

but an AM Vantage is also cool (and much cheaper)
There you go: This is my new (demo model 2008 with 4,500 Kilometers) Vantage. The actual car and photo the day I took it from the dealer in Vancouver. Just have to figure out if i can change my name from Bimmer to Vantage in this forum.

HT2477 how can I connect a Garmin GPS etrex vista hcx to macbook pro with retina.

I would like to know if is it possible to connect my GPS Garmin etrex vista hcx to my macbook pro with retina.
Thanks.

I believe that Garmin GPSr model uses a USB connection, so if you load the Garmin drivers, and possibly the [free] Garmin Base Camp utility, you should be able to connect your GPSr to your macbook Pro and transfer information. I don't recall positively, but I think that your GPSr should appear as a USB drive automatically once you connect it, but it might require you to load the Garmin Communicator software.

My iphone4s will charge but not sync when connected to my macbook pro, using the latest itunes

My iphone4s will charge when plugged into my macbook pro but will not sync. I am using the latest version of itunes and I already tried restarting both the computer and the device. What gives??

After days mucking around this worked for me..
For Windows Vista, Windows 7, or Windows 8
Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose Update Driver from the shortcut menu.
Click "Browse my computer for driver software."
Click "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.

My macbook air can't connect to wireless isp fails? other computers macbook pro are logging on

Hi My Macbook air isp is failing when i try to connect to wireless however other computers can acccess the wifi
. Can someone suggest what to do?

Hello, gushingstream.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues connecting to Wi-Fi. I would also make sure all firmware updates have been processed on the router.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Jason H.

Can you connect an iPad mini to an iPhone through Bluetooth to use the internet on the iPad? Thanks!

I used to connect my iPod touch to my former phone, a Nokia, via bluetooth and it allowed the iPod to connect to the internet.
Is it possible to do this with a non- cellular iPad Mini and an iPhone?
Thank you

Yes you should be able to or by wifi, here is the information about the iPhone hotspot if you need more information http://support.apple.com/kb/HT4517

I want to watch a video from netflix, from my macbook pro, using the mirror tool, but it frezzes sometimes or goes to slow, can you help

i am tring to use my Apple tv to watch netflix videos from my computer, using the mirror tool, but it goes to slow, frezzes, or skip the audio some times i womder if that has to do with the internet ? or its jus normal..

Welcome to the Apple Community.
It's fairly certain it's your local network. Why are you trying to mirror something you already have on the Apple TV.

Can I connect 2 monitors and an ethernet to my macbook pro using the 2 thunderbolt and hdmi connectors?

Similar Messages

Maybe you are looking for